ELEGOO Mercury X Bundle, Larger Size Washing and Curing Machine, Wash and Cure Station Simultaneous Working Add Bottom Light Source Fresnel Lens for Saturn, Mars LCD MSLA DLP 3D Printers UV Curing Box
ELEGOO Mercury X Bundle Washing and Curing Machine
ELEGOO Mercury X Bundle Washing and Curing Machine integrates the advantages of washing and curing function, to streamline the whole post-processing. Double row high-power 405nm lamp beads, bottom light source beads, simultaneous working mode, larger washing basket, the intelligent time control, 360° rotating curing platform, automatic Anti-UV System both can help you solidify the model you want, achieving your perfect requirements.
Product Parameters:
Control Method: Touch button
Rated Power: 12W/36W
Input Voltage: 100-240V 50/60Hz
UV Light: 405nm
Time Setting: 0-30mins
Maximum Wash Volume: 180mm*121mm*153mm), 201mm*124mm*255mm
Maximum Curing Size: Ï200*260mm
Machine Net Weight: 2.27kg/2.4kg
Operation Instructions:
- Control Method: Single Knob Button
- UV Light: 405nm(28) + Bottom light source(4)S
- ingle Maximum washing/Curing Time: 30 minutes
- Maximum Washing Siz: 180mm*121mm*153mm( Cleaning with platform ), 201mm*124mm*255mm( Clean without platform )
- Maximum Curing Size: Ï200*260mm
- Net Weight: 2.27kg(wash station)/2.4kg(cure station)
- Adapter Power: 100-240V 50/60Hz
- Rated Power:12W(wash station)/36W(cure station)
- Notice: Please read the user manual carefully before installing it, and strictly follow the instruction.
Dimensions: | 18 x 12.1 x 15.3 cm; 5.86 Kilograms |
Manufacture: | ELEGOO |
Origin: | China |
Reference: | UK-DP-3D-225 |
Not only is the product durable, high quality and a good price, the Elegoo customer service is fantastic and they truly care about their customers! I will never look anywhere else but elegoo for my 3d printing needs, thanks guys!
It really makes a difference and develops your prints into perfect miniatures. The wash cycle is super easy to use and very convenient, whilst the UV exposure helps harden and define the details. Would thoroughly recommend!
When I first started 3D printing with the Elegoo Mars, I’d clean the prints with a splash of IPA and a paintbrush, and let them UV set by popping them on the window sill for a bit. But that wasn’t enough – prints would crack after a few weeks, showing wet resin still sitting inside hard-to-reach nooks and crannies. If not, they’d brown in places where there must’ve still been some unset resin. Now with this machine, I’ve had none of those problems any more.
Great bit of kit does exactly what I wanted it to do, it wash and cure my prints from my mars pro 2
Does what’s required but the chrome plastic button i. both machines has chips. The cover on the cure machine has one slight wall warp which makes it take a second or two more to place it on. Both work we’ll dispute the minor flaws.
I bought this for my son, he’s very impressed with way this equipment works. It has gone beyond his expectations.
A great unit for washing and uring your resin prints. Simple to use and really quiet. My only gripe is the wash basket needs smaller holes in the bottom as parts can poke through and catch on the water agitator. Easily fixed with a piece of mesh.
Worth the cost for the convenience it offers, would recommend
Imagine sitting absolutely still for 5 minutes. Doesn’t sound like a long time but I challenge you to give it a go. With this curing machine you can wash and cure your parts super easily.
I added in some flexible mirrors to the lid of mine: https://www.amazon.co.uk/gp/product/B0919XSN31/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&th=1
These (I hope) will let more light bounce around inside the chamber and hopefully lower cure times and get a better coverage.
Very good product.
Brilliant complement to the Mars or Saturn and if you’re going to be doing anything more than very casual printing then this really is a must.
Typical well-engineered and great value kit from Elegoo – does exactly what it’s supposed to: washes well using the magnetic stirrer and cures quickly and effectively using the turntable. Given that the plastic disk is also transparent, I’m sure this helps to distribute the UV across the bottom of the model but I always turn the models once during the cure.
I’d recommend pre-rinsing your models in a pickling jar of IPA before placing them in the washing station in order to save the huge container of IPA from needing changing too often. Its also worth noting that the magnetic stirrer is not designed for use with water/water-washable resins, it simply isn’t vigorous enough. Therefore when using WW resins in the past I’ve used a sonic bath alongside the Mercury.
Good price, quick wash, quick cure, nice looking and great accessory range.
finishes look smoother and the wash cycle is so much better than immersion alone
I’ve had my wash and cure station for a few months and absolutely love it. Unfortunately the was tub developed a leak.
So I reached out to the support team. You can sing along to the tune of There’s a hole in my bucket.
“There’s a hole in my Bucket dear Ellegoo, dear Ellegoo, there’s a hole in my bucket, dear Ellegoo a hole.”
They sent back this response.
“Then we will fix this dear Chezzy, dear Chezzy fix it, with a new one dear Chezzy, dear Chezzy a new one”
So after two days I can now sing
“There’s no hole in my bucket dear Ellegoo, dear Ellego, No hole in my bucket, dear Elegoo Thank you”.
It a lot easier to use this machine instead of separate buckets of iso or water to clean prints.
Great but with flaws perfect match with a Mars pro / 2. Down side is make sure you select the right function otherwise you might blender your prints done it once or twice. Also I’d like the UV light to start right at the bottom small or slim prints I worry don’t get an even cure.
Although at first I though I would need to return it as the turntable wasn’t turning. I decided to take a peek inside and saw that a cable had come loose. Once replaced it works fine. Still gave 5 stars as its not the sellers fault that the manufacturer doesn’t have a quality check.
A Great addition to my 3D resin printing Elegoo Mars.
It takes a lot of the mess out of the cleaning up of new prints and the added benefit of the UV curring on a rotary turn table.
The unit is well built and sturdy, simple to operate and clean down after it had done the hard work.
Dont know why it took me 6 months to finally add this to the desk.
got this one to go with my Mars 2 Pro that my wife got me for xmas.
tried it for the first time last week, must say it saves on alot of mess and hassle with cleaning my prints.
for long enough ive been using my pickle jar and a paintbrush and alot of kitchen roll to clean up spills etc.
now i can let the build plate sit to drip a little, then take the whole build plate and use the attached hangar, which incidentally is a variable length depending on how high your print is and how much cleaning solution (or water in my case) you have in the wash and cure station and it sits in there nicely.
pop it on a 10 min wash, which changes the direction after 4 minutes it seems.
once i shake the excess water off and sit to dry for a while then pop all the supports off, a quick 5 minute cure and its all done.
all in all an excellent companion to my printing hobby and delighted i got it.
if I was to give it any negatives, which are pretty minor and dont detract at all from its function.
– there could do with a way to hang the basket after washing to let some liquid drip off.
– its default mode is Cure when its switched on. just an extra button press to toggle to Wash. just seems like it would be more sensible to have it default to wash then cure. very nit picky of me tho for the sake of 2 seconds 😉
deffo recommend if you have a mars series and wont be going larger for a while and can get it on offer.
This is a fantastic purchase. I have moved away from cleaning my prints with ipa in a bucket with a toothbrush and then curing with led’s in a cardboard box. models are no longer tacky after curing. highly recommend.
I recently got the Mercury to help with cleaning and curing the prints from my Mars 2 Pro.
It is super simple to use and safe to work with provided you follow the instructions.
Sadly mine did have a fault with the Mothetboard but the Company customer service was outstanding and Ken, my liason, was incredibly helpful and after a short email conversation had resolved the issue and posted a replacement out to me.
I love the Mars 2 and the Mercury and would recommend both to someone brand new to the hobby such as myself.
P.S the tub for holding the isopropyl alcohol will need at least 2.5 litres in it to work properly so don’t order just the one bottle like it did at first haha!