HUANUO 13″-32″ Aluminum Dual Monitor Stand for two Screens, Height Adjustable, 360° Rotatable Gas Spring Arm, 2 Optional Mounting Methods, Support VESA 75-100mm & Weight 1-8kg
HUANUO New Version Dual Monitor Stand is Perfect for Larger and Wider Desktops!
Have you ever complained about the limited space in your workplace? Have you ever had neck, shoulder or back pain after sitting for a long time? HUANUO adjustable laptop arm stand is the excellent choice for realizing high-efficient work.
This dual monitor arms adopt high-quality & polished die-cast aluminum, which has long lifespan and ease of maintenance. Besides that, the desk mount for monitor is equipped with an ultra-precise gas pressure spring that has passed movement tests with 25,000 setting cycles. Due to the low 5% damping rate, the dual monitor mount minimizes the jitter and noise for better satisfying the users’ needs, ensuring trouble-free height adjustment at least 6 years.
Our monitor arm desk clamp is mounted on a 43 cm high column. With the easy-manipulated performance of dual monitor stand, the user can easily raise your 32 inch monitor with one hand from the desktop to a maximum of 68.6 cm vertically and raise it up to 61 cm horizontally. It is also possible to stack two screens (A and B ≤27 inches or A ＞27 inches and B ＜24 inches), whatever two screens are or aren’t in the same horizontal direction. This 2 monitor desk mount is also suitable for those monitors whose diagonals are smaller or larger than the screen size specified in the description. Just make sure the VESA distance is within the supported range and the load weight of the pc monitor arm (1-8kg) does not exceed.
Note
- DO NOT install this desk monitor stand on PB, MDF or GLASS desks.
- The gas spring is in low pressure under original condition. The user must press the arm to a horizontal position and adjust its tension to maintain the monitor stable. Press the computer arm and then adjust the screw. Turn clockwise (-) to decrease pressure for light monitors and counterclockwise (+) to increase pressure for heavy monitors.
Specifications
- Screen size: 13″- 32″
- Material: Die-cast aluminum & Premium gas spring
- Load capacity: 1-8kg per arm
- Easy assembly in 5 minutes
- Over 25,000 tests
Full motion settings
This dual monitor mount offers great flexibility with full adjustments – 360 ° rotation; -85 ° to + 90 ° inclination; -90 ° to + 90 ° swivel.
Why choose HUANUO gas spring desk monitor mount?
Optimal Ergonomic VESA Desk Mount Stand
The HUANUO two monitor stand can easily raise your monitors to optimal heights and thus effectively reduce the strain on the neck and back. Adjusting the screens at the most appropriate angles as needed can ease your backache while looking at the monitors for a long period. So you can stay comfortable and increase your productivity at the same time.
Work efficiently
Holding the monitor on the tall monitor stand can save more desk space and ensure that your workstation remains spacious and tidy. A clean work area leads to a clear mind to improve the quality of your work as a whole.
| | | |
|---|---|---|
Two installation options– Supports both the C-clamp and the Grommet Mounting assembly; – C-clamp mounting supports table thicknesses up to 8.5 cm while Grommet Mounting for tables with a thickness of up to 6 cm (hole diameter: approx. 10 mm). NOTE: It is better NOT to install on glass or chipboard desks. | Easy adjustment of the dual monitor clamp– Adjust the gas spring tension to the weight of your monitor (below 8 KG per arm). – Rotate clockwise to decrease tension for lighter monitors, while counterclockwise for heavier monitors. NOTE: Please keep the computer mount in a horizontal position while making adjustments. | Integrated cable managementThe computer cables can be stored into the concealed wiring clamps to keep your cables clean and tidy. |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Fit Screen | 15″ -35″ (1-12 KG) | 17″ – 32″ (2-9 KG) | 13″ – 27″ (2-6.5 KG) | 13″ – 27″ (1-8 KG) | 104 x 27 x 10 cm (Max. 10KG) | 13″ – 32″ (1-8 KG) |
| Material | Aluminum + Iron & Gas Spring | Aluminum + Iron & Gas Spring | Aluminum + Iron & Gas Spring | Alumium Die Casting & Premium Gas Spring | Wooden | Alumium Die Casting & Premium Gas Spring |
| Height Adjustment | 0 – 52 cm up to desktop | 0 – 66 cm up to desktop | 0 – 40 cm up to desktop | 0 – 54 cm up to desktop | 0 – 10 cm up to desktop | 0 – 68.6 cm up to desktop |
| Arm Adjustment | Max. 55 cm up to mounting clamp | Max. 56.9 cm up to mounting clamp | Max. 47 cm up to mounting clamp | Max. 46 cm up to mounting clamp | 74.4 – 104 cm length adjustment | Max. 61 cm up to mounting clamp |
| Screen Rotation | 360° | 360° | 360° | 360° | Angle can be adjusted freely | 360° |
| Screen Swivel | -90° – +90° | -90° – +90° | -90° – +90° | -90° – +90° | Angle can be adjusted freely | -90° – +90° |
| Screen Tilt | -30° – +85° | -30° – +85° | -50° – +35° | -85° – +90° | Angle can be adjusted freely | -85° – +90° |
| Mounting Options | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | Wood board assembly | C Clamp / Grommet Mounting |
| Height Adjustable / Stackable Arms | ✓ | ✓ | ✓ | |||
| Easy Installation | ✓ | ✓ | ✓ |
| Dimensions: | 44.4 x 32.7 x 14.7 cm; 6.55 Kilograms |
| Manufacture: | HUANUO |
| Origin: | China |
| Reference: | HNDS5B |
Muss noch montiert werden, aber die Anleitung ist sehr verstndlich. Macht einen qualitativen Eindruck. Alles top.
Bit fiddly to set up but once in place looks great and securely holds both my monitors.
Love the fact it comes with all the tools needed and cable clips etc.
Leider passt der Kabelkanal nicht. Die Lcher im Kanal passen nicht zu den Lchern im Gestell. Ansonsten gutes Produk
Adems de buen producto, el vendedor se ha portado de forma excelente. Hubo un pequeo fallo en la mercanca y estuvieron muy atentos, y dando soluciones con rapidez. Mi ms alta recomendacin para ambos.
Die Halterung trgt zwei Monitore ganz gut.
Die Beschreibung des Aufbaus htte detaillierter sein knnen.
Die Ausladung “nach hinten” war vor dem Kauf nicht klar ersichtlich; es war ein leichter Umbau der Gertschaften hinter dem Schreibtisch erforderlich.
Good looking product and solid. Arms are adjustable to suit my preferences – little to nothing i can say bad about the Dual Monitor Stand. cheers.
Me gustan los materiales y el acabado. Por poner una pega los tornillos del final del brazo hay que apretarlos mucho para que no se vaya cayendo el monitor.
Purchased it because it advertises that it is supports desks 8cm thick using the C clamp.
It does fit the C clamp is unscrewed and fitted upside down. A bit troublesome but OK.
The cable channels on the arms only fit 2 cables, would like them to fit one more to match the total cable for my monito
Very well built, sturdy and does a great job in holding the screen. The set of instructions are also very clear and was easy to assemble. Only recommendation I have is to increase the space for wiring as the work is holder is too small and only one power or hdmi cable could fit in.
gt auch meinen 32”
alles stabil und verstellt sich bzw lsst auch nach 2 Monaten nicht nach
Ich hatte einen defekt, was aber schnell ausgetauscht wurde
Ottimo prodotto, gli schermi da 27 pollici sono ben fissati e facili da muovere.
Actually using this with Duronic DM45 100cm pole as i wanted to mount my 27″ monitors vertically quite high up.
Now i just got another because i want to use the arms for t5v speakers.
Producto muy recomendado.
I bought this for my new home office. The product arrived in a well thought out box, designed to hold all components in place in transit. The weight of the package also caught my attention, so reassuring me it would hold my 2 monitors firmly but I was more concerned would my small wooden desk take all the weight at the clamp point. The instructions gave clear identification of all components by letter, even to the smallest screw.
Assembly did not take too long, any slowness was on my part checking and double checking I was doing everything correctly. The first monitor (they’re both 27″ Samsung Curved) was fitted and positioned perfectly, however the second monitor, and the very last piece going in drooped forward even with the adjusting screw being tightened to its maximum. At this point Amazon technical were contacted around midnight and on their advice an email was sent to the seller. A response arrived just a couple of hours later asking for some pictures of the problem, and from that within 24 hours I was advised to remove a tiny ‘gasket’. That resolved the problem.
Summarizing, the product is well designed, and does it’s purpose well. I’ve now rediscovered my desktop. I feel the seller responded extremely well. I’m happy and soon will get another for my main office PC. Sorry but that tiny gasket did knock 1 star off the ease of assembly!
Hlt meine beiden Monitore vllig problemlos (Aoc 27″ und 32″ curved).
Hhenverstellbar, und Anpassungen an individuelle Sitzposition mglich. Es liegt alles notwendige Werkzeug bei. Bei einem Schreibtisch an der Wand empfehle ich zustzlich einen Forstner Bohrer fr einen Kabelschacht durch die Tischplatte.
Die Klemmschraube funktioniert sehr gut, wobei ich die Option genutzt habe es an meinen Schreibtisch direkt zu befestigen, wo es wahnsinnig sicher und gut hlt.
Der Aufbau war sehr simpel und lie sich mit der Anleitung in kurzer Zeit machen. jegliche Materialien wirken sehr hochwertig und robust.
Das Kabelmanagement funktioniert gut und es lassen sich einfach die Kabel reinstecken und befestigen.
Zudem lassen sich die Monitore auch faszinierend einfach durch ein schnellschluss von der Halterung entfernen, was den Auf- und Abbau jederzeit sehr vereinfacht.
Beide Arme lassen sich komplett nach hinten, oben und unten schwenken, wodurch es sich einfach ndern lsst, wie die Monitore ausgerichtet sind. Die Monitoren bleiben auch stetig in ihrer Position und sinken nicht.
Kurzgesagt bin ich mit der Monitor Halterung vollkommen zufrieden und wrde sie mir jederzeit wiederholen, fr den Preis bekommt man hier ein gutes Produkt, dass einen stabilen Eindruck macht.
Consider that support arms sit at right angles – means you need space behind the desk to move screens in certain positions but overall very good produc
Brazo totalmente metlico y duro, bastante bien invertir un poco mas por este monito
I wanted a mount that would hold a 34″ Ultra-wide in landscape mode and a 27″ 4k monitor in portrait (but with the option to spin the to landscape when needed. This does the job very well. The arms dont stick out the back of the deck too much which was important as my desk is up against the wall. Although the 34″ is close to the weight limit, doesnt seem to cause any issues and the monitors are stable with no movement at all. For the price, would recommend.
Tard mucho en elegir un modelo y creo que acert de pleno. Hace dos meses que lo compr.
Tengo una mesa de cristal bastante fina (1cm mas o menos de cristal templado) y no podra estar ms contento con el resultado, uso la abrazadera C para el anclaje a la mesa y ni se inmuta con los dos monitores de 27” cargando hacia el mismo lado. Te permite cualquier configuracin que puedas necesitar y puedes cambiar de una a otra sin esfuerzo, los monitores se mueven genial.
Los materiales son de calidad y se siente bastante robusto en general. Muy recomendable.
It is no different than being at work in the office
einfache Montage der Halterung am Tisch, Monitore (beide 32″ Zoll) lassen sich problemlos anbringen. Einstellung ist etwas mhselig!!!
After seeing this type of monitor mount in some customer offices I started looking for on to myself. It has a very sturdy built, feels very reliable and my home office looks super professional now.
In my setup I have two different monitors 24″ and 27″ and use an HDMI switch to easily change from a two PC to a single PC with 3 screens configuration. The bolts to configure monitor weight are very simple to operate and I am very happy on how I can move them to any position even tilted or flipped and they will just stay put in the place I left them (the user manual is detailed and essential, there are details like, if you configure the monitor weight in the wrong position it can damage the monitor).
Premium product with a good value. I definitely recommend.
Die Halterung entspricht voll und ganz den Anforderungen und ist leicht zu installieren.
Wir haben die Halterung gekauft um den Platz auf dem Schreibtisch unseres Sohnes zu optimieren. Dafr eignet sich der Halter hervorragend.
Was man beachten sollte: Die meisten Tische haben unterhalb der Schreibtischplatten z.B. Schubladen oder Quertrger sowie Verblendungen an den Seiten. Diese waren in unserem Fall der Montage via Klemme im Weg, weshalb ich dann doch die Tischplatte durchbohren musste… ist natrlich bzgl. der Wiederverkaufswertes des Tisches suboptimal…. Trotzdem bisher sehr zufrieden, da stabil und die Montage der “Arme” einfach und problemlos waren und auch die Hydraulik Monitor und Notebook (extra Adapter notwendig) nach der Anpassung des Widerstands gut halten.
Solid construction, required a little bit of grease in the joints to feel smooth.
Without the grease when i moved the monitors forward or back it would unscrew the pole from the mount.
Another design fault is the where the Vesa bracket clips on to the arm. It’s not a snug fit meaning the monitor has a bit of give on the horizontal rotation. This is annoying as i’m constantly having to adjust them to keep them level.
Not the perfect design, but happy with the product for the price.
The holder is very robust and easy to adjust after setting the correct resistance for the monitors’ weight. Overall I’m very happy with it, it works as advertised.
Eigentlich fr den Preis kein schlechte Qualitt , doch wenn es nicht mglich ist den Bildschirm waagerecht aufzuhngen ,da die Halterung mit zu groen Toleranzen gefertigt wurden, ist es schon etwas nervig. Und beim Versuch dieses Problems habe ich dann dass entdeckt…..
Mfg Leo
An meinem Notebook habe ich damit 4 weitere Bildschirme angebracht und diese in verschiedener Hhe.
Artikel ist schon schn, das Einstellen der Monitore ist etwas umstndlich. Flexibilitt danach bedingt. Man sollte gengend monitorkabel haben und stromkabel Verlngerung verwenden. Ein sehr robuster Drucke
Hallo zusammen.
Ich habe mir die Halterung bestellt da es auf meinen Schreibtisch zu eng wurde.
Also auf Amazon gestbert und das passende Ergebnis gefunden. Aussehen ist gut und das Material ist hochwertig.
Was mich strt ist aber das bei meinen groen curved Monitor der Arm immer nach unten geht und sich der Monitor neigt deshalb musste ich die Schrauben fester ziehen und immer wieder lsen wenn ich den Monitor neigen will sehr schade deshalb 1 Stern Abzug. Bei dem kleinen Monitor ist kein Problem zu erkennen.
Good product. Bought it so I can sit and stand at the desk. I did have to raise it slightly (3″) but works a treat.
Very easy to set up. About 15 – 20 minutes to get two 28 inch monitors up and running. No problems at all. Once the tightness of the joints is adjusted for the weights for the monitors (again very easy and clear instructions and allen keys provided) the monitors are very easy to move, up/down, side to side, tilt and swivel. The only tool required and not provided is a philips screwdriver and most people have that.
his is really easy to put together and took no time to fit to the desk to use. monitors fit well and everything is strong and sturdy. all works just as it should and is a bargain. well worth it and will clearly last well for years even with substantial use.
Lockdown meant that I had to work from home, I work from a laptop and 2 monitors and working from home means lack of desk space.
Work provided everything apart from a desk and any accessories like this so when this came up I couldn’t believe my luck.
Aluminium dual monitor stand for 2 screens (13 to 32 inches) very easy to install well for my brother in law as me and tools and stuff like this do not mix.
Very stylish, very practical, very easy to adjust, no noise and makes your life easier while needing more then one screen.
Comes with 2 mounting options – C clamp or grommet which I went with as I like having more space on my desk and I certainly have now with this screen stand.
I’m hoping if we go back into the office to work I would be able to take these with me.
Das Produkt kam gut verpackt.
Der Aufbau wurde auch ohne Anleitung gehen aber ist mit ein Kinderspiel. Tut was es soll wrde aber davon abraten 2 32″bilds hirme damit zu verwenden da dann die Beweglichkeit doch sehr eingeschrnkt is
A very well designed and engineered stand. Looks and feels solid, screws are well milled and high quality. I’m impressed and it holds my 2 monitors (7kg each) perfectly.
Seems well made, easy to assemble and supports 2 24″ HP monitors with no problems. Made workspace much more useable
Brilliant for dual monitor set-ups, especially for use with music programs, graphical software and gaming etc. Easy to get the two screens positioned perfectly depending on your preference (when using FL I like to have one monitor high right and one low left to navigate the studio more easily and is great for this!) and it’s really easy to change angle/tilt and rotate etc once installed. Really well made and solid, robust and feels very secure once fixed in place even with both monitors on. Covers most monitors between 13 and 32 inches and is not bad value compared to some alternative I’ve looked at.
Sehr gut. Alle notwendigen Teile dabei. Sehr flexibel zu montieren.
mein Freund hat sich das bestellt, weil er seine Bildschirme bereinander haben wollte. Dafr geht es allemal. Steht zwar etwas schief, aber hl
Ce support 2 moniteurs est trs facile monter. Il parait solide et de bonne qualit. Une fois mont les moniteurs sont facile bouger et ce pied libre une place importante sur mon bureau. Trs satisfait de mon achat.
Using this to Mount a 24″ and 27″ screen. Easy to assemble. Fixed it through hole in desk rather than clamped to edge. Easy to convert desk fitting to hole mounting option. Both my screens are Samsung curved, so I had to use the spacers provided to mount the screens. Once the lifting arms are adjusted to the weight of the screen, it gives excellent movement in all directions.
L’articolo sembra veramente ottimo, quasti tutto in metallo e le parti in plastica sono minime, contribuendo cos a dare un’impressione di ottima stabilit.
Ci ho agganciato un monitor 27 pollici non proprio leggerissimo, ma lo regge senza difficolt, rimanendo sempre in posizione, senza oscillazioni.
Ho trovato un po’ difficoltoso aggiustare la tensione della parte del braccio con la molla, non chiarissimo in quale direzione vada girato per sistemarla.
Bisogna comunque tenere conto di un po’ di cose: se non si ha spazio dietro la scrivania, bisogna pensare bene a come sistemare il braccio che tiene il monitor, e soprattutto servono cavi lunghi se si vuole allungare il braccio.
Nice and sturdy item comes with all the screws you need. Worth the money
Does the job perfectly for my 2 x 27inch monitors. Easy to assemble, clear instructions, and works well, especially the gas adjustable support.
Endlich wieder Platz auf dem Schreibtisch, es kann auch teilmontiert werden oder such ein zustzlicher Laptop-Tisch angebaut werden. Gute Verarbeitung, weiss wre schn gewesen.
The product arrived quickly. It took me only 10 minutes to assemble and mount to my desk, and fits my monitors like a treat.
Le produit est vraiment qualitatif, robuste, ajustable dans toutes les directions du fait de ses deux bras totalement autonomes contrairement aux doubles bras dont l’un dpend de l’autre. Les suspensions gaz un rgale !
Je l’ai achet pour un cran 32″ en bas, et au dessus un 27″
Mme dans un emplacement trs confin j’ai russis le placer.
Forcment je n’en tire pas toutes les possibilits car je ne peux trop bouger les bras mais ce n’tait pas le but, tant surtout un usage fixe sans devoir les orients une fois disposs.
Je recommande !
A strong well engineered product that has transformed my work from home setup.
Jedes Teil macht einen sehr wertigen Eindruck. Bin echt positiv berrascht, was Made in China” hier an hervorragender Qualitt abliefert!
Der Aufbau war leicht, in meinem Fall ging es um einen 27″ und einen 32″ Monitor. Die Anleitung enthlt einen wichtigen Punkt: die Arme sollte man in eine gestreckte Position bringen, bevor man die Strke der Gasdruckfedern ndert.
Langzeittest derselbigen steht noch aus, bisher absolut zu empfehlen!
Befestigung ist sehr gut, mit einer gut griffigen Rndelschraube sowie mit gummierter Auflageflche – insgesamt wertig und sehr stabil.
Die Arme werden an der Stange ber eine Art Sperr-Ring justiert (ebenfalls mit gut einstellbarer Schraube), das geht sehr einfach und przise.
Die Strke hzw. Widerstand der Gasdruckfedern kann ber Einstellschrauben justiert werden, das geht ebenfalls sehr gut, wenn auch die Justierung mit Gewicht z.B. bei dem Amazon-Basic Halter noch etwas leichter und prziser ist (fr den doppelten Preis), geht aber wie gesagt sehr gut (und auch mit 34″ Monitor).
Absolut super ist allerdings die einrastbare VESA-Mount Platte – die wird direkt an den Monitor geschraubt und dann wird der Monitor einfach nur in die Aufnahme am Arm gesteckt, sehr geil.
Die restlichen Justierungen (horizontale bzw. vertikale Ausrichtung) der Monitore kann ebenfalls ber Einstellschrauben gemacht werden und ist przise.
Schn wre noch, wenn zwei 32″ oder 34″ Monitore nebeneinander passen wrden, aber dafr sind die Arme dann zu kurz.
berraschend gutes Gert bzw. Lsung fr ne schmale Mark.
This is a really sturdy, robust monitor stand that easily bears the weight of two large monitors. The whole thing was relatively easy to assemble with the job done in just a few minutes, and the adjustable arms make it easy to move and tilt the screens to configure them as required.
This has really freed up a lot of room on my desk and I’m really happy with my new set-up!
Seems like good quality, sturdy. Has left me with loads more desk space. Great buy, good price
Qualitt ist gut.
Gelenk unter der Gasfeder knnte etwas besser sein darum nur 4 von 5 Sternen.
Easy to setup monitor stands, this replaced an existing stand I was using which wasnt clamped to the table so therefore took up a lot more space. Being able to clamp this to the back of the table gave me much more important desk space. My desk is quite sturdy so no danger of damaging it when tightening the clamp. The monitors attach easily enough with the VESA connection. Adjusting the monitors is simple and the gas spring holds the monitors easily in the desired position, you can adjust the tension to further suit your needs – dependant on monitor weight. There are plenty of combinations for mounting your monitors but mine are just the standard side by side layout.
Overall this stand is sturdy and most importantly for me was a space saving upgrade my existing desk-based stand. I am confident the gas system will last a good few years!
This is a very well made dual monitor stand. It is suitable for dual monitors up to 32″. I really like it. It fits nicely onto my desk with a good clamp that doesn’t mark the desk. Though some people might want to put a bit of felt under the clamp. The arms have some sort of gas powered spring and it has plenty of viewing angles/movement. The arms and connectors allow a very wide range of movement and on that score its the best I have come across. In terms of price at 69-99 its at the top end of its competitors price range. There are cheaper ones out there that look to have a similar range of movement. However this is very well made with lots of clips for tidy cable management. Last of all it was very easy to assemble. I think its a good product and worth the money
The stand was really easy to assemble and it allows me to move my monitors around really easily.
The spring mechanism is a breeze to use in moving the monitors up and down.
I’m using the stand with 2 ultra wide 32′ monitors and haven’t had any problems or issues so far.
Passte leider nur nicht zu meinem pc Tisch bau. Sonst sehr geile halterung
Halterung entspricht der Beschreibung und erfllt meine Anforderung, und sie lsst sich vielfach Einstellen.
This is a quality product, that can support pretty heavy monitors, up to 8kg!
But be warned, this is a qork out to set up and you need plenty of room, my box room was blue with the amount of times I knocked myself or banged a not-so-funny bone!
But once set up I was very pleased, at the moment it only has one 19″ Lacie Photovision monitor on it as I plan on getting an extra 32″ monitor soon, one of those Dell monitors looks good value, this will give me a monitor to observe an old mac that is acting a print server for a PostScript level 3 blw laser printer, and the 32″ will allow me to see a double page spread next to my iMac screen!
Very happy!
Easy is to fit on any desk and easy to assemble. Value is very good and not to big price
A great stand today can be mounted in 2 ways. Easily adjustable, sturdy and space saving. Great!
If you want two monitors on your desk then of course you don’t need to shell out a lump of wedge for a dedicated support. But, the fact is that two monitors sittin on your desk takes up a lot of real estate and does tend to look a bit untidy. Not only that, the range of movement for correct visuals can be a bit hit and miss.
Step forward this dual monitor stand. Super well made, and easy to position to your exact requirements it is an excellent bit of kit.
Once assembled which is straight forward even if you didnt have visual instructions the only real issue is what you fit this too. It’s a chunky bit of kit and of course with two monitors on it, the leverage is quite high. As the blub states you do need a decent table not a chipboard, MDF or glass one otherwise you do risk some serious damage.
That being said, if you are a bit of a handyman or woman most things can be resolved with a bit of thought. I glued another section of ply below my table to allow a more sturdy mount so it can be done.
Quality of construction matches the price. In other works quite high..
Overall a cracking double monitor mounting system that is very well made.
This is an extremely sturdy dual monitor stand. It is quite weighty so you need to make sure you have a sturdy desk and have it in the right place before you start. This stand is definitely not pretty but it is very minimalist so you don’t notice it once you have put all your bits and pieces back on your desk. This stand is easy to assemble as long as you follow the clear instructions. The pieces are quite heavy so I found it best to assemble it on my bed and then start to move it to the desk bit by bit. The monitors feel very secure once they are attached to the stands and the cables can be clipped away behind them. I love the fact that you can so easily tilt and adjust the monitors without worrying that the stand is going to collapse.
These are very good dual monitor brackets that are easy to fit and has great manoeuvrability. The main problem with these brackets is the clamping system which in itself isn’t its problem. As these brackets are solid and heavy which is a good thing, you need a more solid desk to clamp them down. And once you have resolved this problem then these brackets are perfect.
Supplied with these brackets are two VESA quick release plates that are super handy. One last note is that there are weight restrictions on these monitor brackets which you check before buying. Otherwise great product.
This is my second Monitor stand with gas spring from HUANUO. I do a good bit of coding at home and i’m using this dual stand to hold my monitors and open up space on my desk. My old stand was a bit static, but with this stand featured with gas spring arm it gives me the option to adjust the monitor an any direction, it’s a nice upgrade from my previous stand, basically the difference compare to my old one is that this can be rotate in 360 effortless. It can move freely, but still remain stationary when placed into position. I have two 27″ HP monitor mounted on them which has 75 x 75 VESA but this would also work with 100 x 100. t’s very adjustable at many heights and viewing angles, tilts, extends, up and down, etc. It also keeps the wires of the computer organised, together, and out of the way which cleaned up so much clutter for me. To fix this mount onto my desk was easy but it took me an hour to do it correctly. the User manual is very helpful just follow the instructions. The bolts have hex sockets, so you will need an Alan wrench set handy when you’re adjusting the joints. The stand can be fixed to the desk with a clamp but this can be a problem if your desk right against the wall. In this case i suggest to drill a hole in the desk just about 10cm from the edge then large enough for the bolt to fit through and mount it that way. My only worry now is that my table won’t be strong enough to hold 2 monitor :). Now I can use two monitors simultaneously adjusted preferably and I have much more space on my desk to do the other things I need to do. This is a great product for a fair price, glad I have it. Couldn’t be happier.
Heavy duty and fairly easy to erect on the right desk. Please don’t purchase these if your desk is not sturdy and capable of being the platform for around 12 kg of weight with the stands and monitors. The reason why I mention is because these are a top banana good quality and carry a weight. I now have 2 mons beautifully positioned – leaving me plenty of desk space and a great view of all the stuff i should be doing feather than writing this review.
A really good purchase..
I have tried a few monitor stands in the past, and my main frustration is the jolty movement of the screens once they are mounted.
This is a very chunky unit, and you have to be aware of the potential overhang depending on how your monitors are positioned, BUT the range of movement is very good!
The construction was pretty painless, the most challenging part is actually attaching the monitors, but this is the case with all monitor stands, especially the dual monitor ones.
Overall I am very pleased with this unit, it’s not cheap… but its good quality.
This dual arm stand is quite e weighty and sturdy bit of kit will need a sturdy table or desk to support it properly.
The stand comes in pieces and does require putting together, the instructions are easy enough to follow and give options for two different fixings. You can either use the clamp to attach or the option I have gone for is the one that is screwed into the desk as I do have a solid wood desk and this gives a solid fixing for the stand.
Once the whole stand is in place and then the rest of it is assembled I then attached my screens to each each arm. These again are easy to attach and I was able adjust everything to where I wanted them to be.
There is a good range of movement, and I loved that the cables for the screens are hidden along the arms. It has freed up my desk and the monitors are a much better height for me to see.
Yes these do require assembly and you do need to have a good quality desk to fix the stand to but it is a quality stand that is well-made and has a good range of movememnts.
This is a heavyweight stand and I am delighted with it and would ercommend it.
I needed to support 2 monitors, this works fine and I did add some wood underneath to add to the desk’s thickness.
A very well built dual monitor arm.assembly is a doddle. The instructions are just images but they’re very simple to follow
The gas mechanism of the arm is incredibly strong, to the point I can’t actually move the monitor horizontally but then again I haven’t messed around with the gas tension much as it sits exactly where I want it.
Everything has its own grub screw or Allen bolt to tighten when you have got it in place. Each joint can be loosened to move and tightened to set. There is a little bit of play and wobble in the arms but not enough to give me any concern of it falling.
The vesa clip is vest sturdy and has a release mechanism so you won’t be accidently removing the monitor.
The clamp for the desk is chunky and very sturdy, with the ability to use an Allen key on the bottom of the hand screw to get it even tighter which is brilliant.
Overall a very impressive dual monitor set up. Exactly what I needed for my 2 x 27 inch monitors.
Diese werden problemlos vom dem Standfu gehalten.
Der Standfu an sich sitzt bombenfest am Schreibtisch ber die Klemmschraube
und nichts wackelt.
Das Kabelmanagement lsst sich einfach benutzen indem die Kabel ganz einfach
reingesteckt werden, hierzu muss nicht andauernd etwas ab und wieder angeschraubt
werden.
Beide Arme lassen sich komplett nach hinten schwenken sodass man volle Kontrolle
ber die Position der Monitore hat.
Alles in allem bin ich absolut zufrieden mit dem Monitor Standfu und wrde ihn
jederzeit wieder kaufen. Absolute Empfehlung.
Easy to assemble, great range of motion, holds two 27 inch monitors easily. The quality is really good, the. VESA quick release brackets are a brilliant idea. It’s smartened up my work/gaming area and left me with much more desk space. Good value for money, a really useful item!
This is great. The super expensive ones are ball jointed, so they can be adjusted very specifically – this one isn’t, so it’s range of movement requires moving the two joints to get the specific positioning that you want, but for the price, it’s worth it. A strong system, and the clamp fastening is so easy to set up without others that require drilling and screwing. It holds 2 lightweight computer monitors for dual screening, and it functioned exactly as I hoped it would.
This is an effective monitor stand, well made and very sturdy. It is quite easy to set up despite rather poor instructions where the illustrations are not always clear, and did not take very long, and that’s with working around an otherwise existing set-up, no doubt its even easier if you’re starting from scratch.
It is set up with a 32″ monitor and a much smaller 14″, and it copes well. The larger monitor weighs around 10 k and there are no problems with stability. The only issue I have with it is the slightly restricted choice of adjustment when you have the stand mounted on a desk that is directly against a wall, this limits the space for the movement of the articulated arms. The result Is that for some positions the monitors come too far forward over the admittedly narrow desk. Adjusting tension settings for the heavier monitor I was worried that might result in over doing it, but all was well in that respect.
More and more people have dual monitor display, and this is particularly invaluable for those, like me, who work from home.
By using these, it frees up a fair bit of desk space lost with monitor stands, plus lots of flexibility.
This really is a bit of quality kit, with adjustable gas struts for easy adjustment, and positioning.
Instructions are good, very clear, and easy to follow with all parts clearly identified for ease — saves rooting through, trying to work out what goes where! Very easy to follow, no problems at all.
This is definitely a higher end product, certainly good enough for a proper office environment. There are cheaper (good) alternatives, I have used one, but this really is a cut above.
This product can be used with monitors from 13 — 32″, so perfect for most people. I am using 24″ monitors, and really good, very easily adjusted to how you want.
Cable management is included, but you need to ensure you have quite lengthy cables, or you won’t be able to use cable management properly, no big deal though.
In summary, a high – end dual monitor arm that is strong, stable, with loads of adjust ability, with no effort, just ease of use. Well worth the premium price.
HUANUO Aluminum Dual Monitor Stand for 13-32” Screens
This arrived in a fairly small but surprisingly heavy box. Once I removed the stand components, I could see why the box was so heavy. This really is a well made product, virtually all of the parts are made from heavy gauge metal, finished in a matt black powder coating.
This does need to be assembled. Assembly is quite straight forward, the supplied instruction guide is easy to follow, with detailed diagrams showing every step of assembly. The only tools you will need are a Philips type cross head screwdriver, 3 different size allen keys are included in the box.
After carefully checking that all the components were included, I proceeded to assemble the stand. This was pretty straightforward, it took around 30 minutes to organise the parts and put this together. Once assembled, I was highly impressed by the build quality, it’s certainly made to last. It looks good too!
You will need a substantial worktop to attach this to. With 2 monitors attached, there will be a great deal of strain on the mounting clamp. The clamp is made from heavy gauge metal, it’s certainly strong enough for the task, the weak point could be your worktop. This stand will be best suited for a thick worktop, the bracket will place a fair amount of strain upon it. If your worktop is quite thin, or is standard thickness MDF? Then may I suggest placing a piece of board underneath to help spread the load.
I fitted this to my sons workstation as it was quite expensive and built like a tank. He is a keen gamer and uses dual monitors, his current setup meant the monitors sat side by side on his worktop. This worked fine but did take up a lot of space.
Once we clamped the stand securely onto his worktop, we attached his 2 x 30 inch monitors. I was surprised how stable this was, the secret is to have the clamp as tight as you can get it. If you wish, you can add a screw or bolt into the worktop as added security, but the clamp does hold the stand quite securely on it’s own. Any cables can be neatly tucked away using the provided cable clamps.
Where this stand excels is in it’s adjust-ability. Both monitors can be placed into any position you require, they can be raised, lowered, turned, tilted, rotated etc, each boom can be adjusted independently of each other. Once adjusted, they remain exactly where you placed them. I could detect no gradual creep out of position or movement if knocked accidentally. The booms each have a gas powered ram built in, these are very similar to those found on a vehicle boot lid. This means that any adjustment is both smooth and precise.
This stand really does work well, my son is over the moon with it. It’s well made and is very strong indeed. In my opinion it’s worth every penny of the 64.99 asking price. I would expect this to last for many years, it certainly should stand up to the rigours of heavy gaming or an office environment – Highly Recommended!
Thank you for reading my review, I hope you have found it helpful.
This is really sturdy, a great range of movement and very flexible; my son set it up in his room, I couldn’t put it together myself, I didn’t think it was easy to assemble at all. He uses it for gaming and pc and is impressed with it, it is very heavy and therefore need a heavy desk/base for i
Die Halterung ist einfach aufzubauen und wirkt ziemlich solide.
Es ist allerdings etwas schwierig die Position fr die Monitore einzustellen, wenn man nach hinten keinen Platz hat.
When a clamp is insufficient then the alternative is to use the second fixing which goes through a hole in the desk and can I suggest that it is well worth drilling a hole to make this fixing possible, the desk should be a minimum of 6cm deep though). When firmly gripping the desk you are supplied with two VESA standard clamps that will attach to almost any monitor under 8Kg in weight. I have 2 x 24″ HP monitors and these fit well and securely.
This type of bracket allows you to sit comfortably and work on higher screens that make better posture more sustainable and also to truly multi-task. Adjusting the height and angle of the monitors is simplicity itself and is just a matter of lifting and pushing into place.
Overall, this is a real godsend allowing much greater versatility than I had previously and is so much better than having both screens sat on the desk itself. I feel much more comfortable than previously as my posture is better as I am working at eye level and am sat back in my chair against my headrest, rather than leaning forward.
I was slightly dubious when it arrived but after assembling and use, I wouldn’t be without this excellent bracket system. Highly recommended!
Ich bin zufrieden.
Leider ist die “Hauptstange” etwas zu kurz um zwei 27″ Bildschirme bereinander zu stellen.
Habe zwei 28″ Monitore a 5kg montiert und das Tischhalterung hlt die Monitore bombenfest — kurz gesagt, es wackelt gar nix!!! Weder neigen sich die Bildschirme, noch die Hhe sackt ab. Optisch betrachtet sieht die Tischhalterung auch ziemlich hochwertig aus. Auerdem gibt reichlich Ersatzteile mit im Lieferumfang.
Pretty decent. You get what you pay for. My only complain is that it’s a bit difficult to move the monitors, but for the rest it’s good enough
Well made, holding up a lg 34gk950f with a dell u23hm above it without problems. Nothing to complain about really, wasn’t to hard to assemble, but could have been easier.
Noch auf die Einkaufsliste gehren unbedingt lngere Powercords und HDMI/DisplayPort Kabel. Rechnet 80-100cm nur fr den Stnder. Als Wand-Monitor Abstand bei zwei 19” ergibt sich bei mir minimal 40cm. Mit Loch im Tisch geht das bis auf ca. 20cm.
Variante: Bei kleinen Monitoren kann man den ersten Dreharm weglassen und den Gasdruck-Federarm direkt an den Stnder montieren.
Super Teil und hlt mehr aus als in der Beschreibung beschriebe
Das tut sie sehr gut, die Halterung ist sehr stabil und bietet sehr hohe Flexibilitt.
Der 27er ist hochformat aufgestellt und der 32er Querformat, klappt einwandfrei.
Durch die Einstellbare festigkeit gibts auch kein Absenken o., die bleibt genau so wie ich sie ausgerichtet habe.
War leicht zu installieren hlt beide Monitore gut aus (32 zoll , 27 zoll) macht auch vom aussehen gut was her
Einzigster kleiner Makel ist das die Monitore etwas bemerkbar schrg zur Seite hngen ,ansonsten einwandfrei
Easy to setup, working like a charm. Only the holes for the screws of cable management rails on one arm are too small. I just used other screws
Wenn man perfektionistisch veranlagt ist und die Monitore gerne perfekt positioniert haben will, muss man damit rechnen, nach jedem Putzen vom Monitor wieder alles genau einzustellen, denn die Hhen, Neigungen usw verstellen sich relativ leicht.
Bei dem Preis kann man bedenkenlos ber die Mankos hinweg sehen. Fr 60 Euro bekommt man eine sehr gute Halterung, die selbst an sehr dicken Tischplatten wie bei mir (etwa 8,2mm) befestigt werden kann und stabil steht.
Man muss sich brigens halbwegs gut Gedanken machen, wie man die Monitore anordnen will, wo man die Halterung am Tisch befestigt, wie viel Platz man auf dem Tisch bzw Platz nach Hinten hat, denn das Anordnen erfordert etwas rumexperimentieren. Ich habe schnell meine Position gefunden, da ich mir im Vorfeld viele Gedanken gemacht habe.
27 Zoll und 24 Zoll funktionieren bereinander und nebeneinander. Manchmal muss man einen Kompromiss in Kauf nehmen, weil man das ein oder andere mal eine weitere verstellbare Achse braucht. Dies ist aber bei fast allen Halterungen dieser Art so und eine Alternativlsung gibt’s auch immer.
Von mir gibt es eine klare Kaufempfehlung.