HUANUO Dual Monitor Stand for 17-32 inch Screens, Height Adjustable Gas Spring Dual Monitor Arm, Full Motion Monitor Mount Support VESA 75×5/100x100mm
- Have you ever complained about the limited space in your workplace?
- Have you ever had neck, shoulder or back pain at your desk after a long time?
HUANUO Dual Monitor Stand is the perfect solution for an efficient work result.
Stacked 2 monitor arm for faster surfing. Both monitor size up to max. 27 inch.
Note: When two monitors are stacked, the distance between two VESAs is max.37.5 cm. For example: A and B ≤ 27 inch or A > 27 inch and B < 24 inch. (Because there are too many types of screens on the market, the size here is only for reference.)
| | | |
|---|---|---|
| Premium gas spring after 25,000 tests, without stuttering, smooth and noiseless adjustment. Tip: After installing the desk monitor arm, be sure to push the air pressure arm down into the horizontal position to adjust the resistance. A: If the PC or monitor drops after installation, use the hex screwdriver to turn it in the + direction to increase resistance. B: If the PC or monitor moves up after installation, use the hex screwdriver to turn it in the direction to decrease the resistance. | Two mounting options with the Almighty Toolkit – C-clamp Mounting: Your table should not be thicker than 7.5 cm. – Grommet Mounting: Your table should not be thicker than 10 cm. (Hole diameter: 1 cm-5 cm). | The cable organizer helps to store disorderly video cables and power cables, which optimizes the office environment and saves space. |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Fit Screen | 13″ – 27″ | 13″ – 35″ | 13″ – 32″ | 13″ – 30″ | 13″ – 35″ | 13″ – 32″ |
| Load Capacity per arm | 2-6.5 KG | 2-12 KG | 2-9 KG | 2-6.5 KG | 2-12 KG | 2-8 KG |
| VESA | 75×75 / 100x100mm | 75×75 / 100x100mm | 75×75 / 100x100mm | 75×75 / 100x100mm | 75×75 / 100x100mm | 75×75 / 100x100mm |
| Screen Rotation | 360° | 360° | 360° | 360° | 360° | 360° |
| Screen Swivel | 180° | 180° | 180° | 180° | 180° | 180° |
| Screen Tilt | +35°/-50° | +85°/ -30° | +85°/-30 | +35°/-50° | +85°/-30° | +45°/-45° |
| Mounting Options | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | C Clamp / Grommet Mounting | Wall Mount |
| Max Height | 40cm | 52cm | 55cm | 40cm | 52cm | / |
| Max Extension | 47cm | 55cm | 55cm | 47cm | 55cm | 46.5cm |
| Height Adjustable | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Dimensions: | 44.1 x 23.5 x 18.6 cm; 5.3 Kilograms |
| Model: | HNDS8-E |
| Manufacture: | HUANUO |
| Origin: | China |
Got this for four monitors (so two of them.) Works perfectly. Instructions are simple
Arrived as advertised, it was easy to assemble, I liked the package, it was minimalistic. It can be used with 1 arm only too, the other arm can be added later if you just plan to update the desktop but only have 1 monitor and plan to get another later. Assembly was basically 3 screws, then it was ready to be set on the back of the table.
The manual said that I can adjust strength of the arm if needed but it was actually just right. I’m using this with a 32″ Viewsonic 2k monitor, so far no issues. It provides ample opportunities for cable management. The degree of turns is great, I’ve not regretted buying this yet.
Not very easy to set up but well worth persisting with it, once done a fabulous piece if kit, good price and quality.
You need to be really careful with what you mount on this one. If you are like me, and have 2x 24 inch, at around 4-6kg each monitor, then this arm works. Although even then, you need to position it properly so the center of mass is on the pole itself, if you extend the arms out too far it will bend and probably eventually fall off. I tried to extend one of the arms out with my 24in 6kg monitor in order to show someone something, and the pole started to slant and bend, very scary.
I definitely would not trust a 27 inch 8KG monitor or anything heavier than that.
A very sturdy Monitor Holder. Don’t be fooled by others, this is well built and built to last. Easy assembly. Would recommend
Could fit on my Ikea desk with 2 monitors. Installed 5 months ago and still steady. Arms are very flexible and comes with caps to control cables. I highly recommend this product.
Steady, well built, and does the job! I stacked two 27′ with this arm and it works great.
However, compared to the monitors’ original stands, using arms at stacking position need more space. Not the space on your table, but the monitors are closer to you as the arms need to fold behind the monitors.
If you have a big table then it is not a problem. My table is about 60cm wide (from Ikea). Stacking two 27” monitors is too close. Definitely will change to a bigger solid wood desk after moving house. The reason I mention solid wood desk here is that the desk I got from Ikea could not manage the weight focusing on one point. It was cracked. (I don’t blame it, it is a frame in wood, particleboard or fibreboard and a recycled paper filling.) So I added a hard cover notebook (not laptop, just a notebook for writing with normal pens) on the table, between the clamp. Problem solved!
Good monitor arms for holding my monitors on. A bit awkward geting it on the table but does the job well with 2 monitors stacked on top of each other. Happy with the purchase
This was awesome so easy setup and really sturdy great fo moving monitors around
Great product the only thing is the grip is horrible when I move the monitors the stand moves has no grips on it .
So if your desk doest not have any grip then don’t buy
East to use just read instruction holds my 2 27 inch could not ask for anything bette
This monitor stand will only work if the vesa mounting points on your monitor are flush with the monitor. If you have something like a gigabyte m27q which had a recessed mounting point the vesa mount on the stand won’t fit as too large.
Returned as doesn’t fit monitors