Makita HR2630 26 mm 3 Mode SDS Plus Rotary Hammer Drill,Blue
Makita HR2630/2
Capacity:
- Maximum in concrete with TCT bit 26mm
- Maximum in concrete with TCT core 68mm
- Maximum in concrete with Diamond core 80mm
- Maximum in wood 32mm
- Maximum in steel 13mm
Please Note: Any accessories shown are not necessarily supplied as standard equipment.
HR2630/2 240V 26mm Rotary Hammer SDS-Plus
The HR2630 has a powerful 800 watt motor, to deliver up to 2.4 Joules of impact energy, 4,600 ipm and 1,200 rpm.
Compact and lightweight.
Variable speed trigger allows the operator to adjust the speed based on the material or application and has 3 mode operation, for rotation only, hammer with rotation or hammer only. The modified operation mode change lever enables to switch from rotation to hammering mode and vice versa without rotating the chuck. The torque limiter stops rotation if a bit jams to protect the motor and operator safety.
The HR2630 has 40 different bit angle settings, a one touch sliding chuck for easy bit instalation and removal, depth stop and a forward / reverse lever positioned to allow the brushes to be located so that the drill maintains the same speed and torque in both forward and reverse.
| Weight: | 2.8 kg |
| Size: | L (Pack of 1) |
| Dimensions: | 42.2 x 10.6 x 30.8 cm; 2.8 Kilograms |
| Model: | HR2630/2 |
| Colour: | Blue |
| Manufacture: | Makita |
| Colour: | Blue |
| Size: | L (Pack of 1) |
Wow!!!
Hi. About to replace trellis on battens against an old block wall to give more height and privacy. Always buy makita but never had an sds drill before. I used m10 – 100mm screw bolts. It’s a long wall requiring 96 10mm holes to be drilled. I marked everything up and that took nearly 3 hours. Drilling 96-10x105mm holes took just shy of an hour. No fuss, no hassle, no problem at all and most important of all it really was easy, no huffing and puffing the drill did it all. Using a good quality 10mm sds bit the drill really did sail through the job. “Word of cation here for those not used to this type of drill. I used a 200mm drill bit and the block wall is 150mm thick. Twice I went through to the other side without knowing. Use the depth gauge!” Two days later, job done and ( if I say so myself) looking pretty dammed good. A powerful easy to use and very capable drill also comes with a good fitted case. I don’t think this’ll be lying idle for long.
eally powerful drill
Had a makita for years but after a hard life i decided to retire the old one. This newer model does the business – When drill or breaking concrete or bricks it is first class and in the price range i do not think it can be matched
Just grea
Exactly what I need great value for money.
Quick delivery.
Makita just the bes
This is just a fantastic drill at a great price I highly recommend this drill
Fabulous tool
Perfect & powerful all purpose power tool – an essential companion for the handyma
Another solid Makita tool
Haven’t put this through too much use or abuse yet but it seems a solid tool. Much more punch than a non-SDS drill of course and just required for certain substances.
3 mode, quick adjust handle and plenty of power for most jobs.
Made in Romania. Feels solid and of typical Makita quality. I expect it will last a long time.
I have always used traditional drills with hammer actions to drive holes in brickwork and other substances. I bought this as I needed to put up numerous boards on brickwork and concrete and really could not be doing with the usual hassle with a traditional drill. OMG!!! Why did I not buy one of these before? Where I was previously taking forever with loads of frustration to drill holes in bricks, breeze blocks and concrete, this little baby does it in significantly less time and with ease. You can also set up the depth you want it to drill to. I also bought the Makita drill bits for the machine and they are well worth it. Now I look forward to putting stuff up rather than putting it off endlessly because it is now a pleasure rather than a chore!
Good quality, does what it says on the label, great product!
This product is the standard high quality and powerful accessory you’d expect from Makita.
Excellentproduc
Perfect prese
My partner is extremely happy with his gift, sorry I cannot say if it is lightweight but the product is good value for money
High quality produc
Cuts through concrete like a knife through butter! Saves time and a lot of back ache! Worth the money spent. Only bought it this month so will update the review in a few moneths time. So far so good. Just remember that if using the chisel function you will need to dip the sds plus bit head in grease to maintain the chuck. Dont use cheap grease as I’ve read that the grease can eat up the chuck’s rubber rendering it useless. Ive just played safe and gone for Makitas own sds grease but i see that castrol is equally good.
An unexpected visi
As a degenerate DIYer I had reservations buying this for a hearth and beam replacement job, but it turned out OK in the end aside from the fact it’s so powerful on hammer mode I nearly ended up in my neighbour’s living room.
Great SDS drill
Really good drill – very good quality at a good price. Has a lovely weight and feel to it and a nice long power cord. Bought to replace a DeWalt that had worn out after a few years and the repair guy recommended the Makita. You need to be aware that it is an SDS drill which means it takes SDS bits (which have grooves in the sides). If you want to use this with normal bits you need a chuck adapter- there are loads on Amazon for not much money. But SDS bits are far better if you are drilling into masonry or heavy timber as they don’t slip in the chuck. I have a small rechargable drill for lightweight work and use one this for the bigger jobs.
Best DIY hammer drill
I bought this drill for concrete wall in my new house to hang photo frames,clocks,wall shelfs etc.It doesn’t work with standard drill bits.Later I realised and bought Makita D-03888 5 Piece Standard Sds-Plus Drill Bits (recommended by amazon frequently bought together) which drilled quicker and easier in concrete wall.Best DIY hammer drill ever !!!.
Light and powerful
This is the second one I have bought and there spot on for every day drilling …
Great drill
Bought it for my husband. He is very happy with it.
Great Value 240v Drill!
Box is sturdy and great drills very well used it quite a few times now and very happy with the results.
Be aware of the chuck
Have to say this is a well built piece of kit.
I bought it as a replacement drill as a “do it all” unit.
One thing I did not know about SDS drills is the chuck is a different design so traditional drill bits don’t fit.
After contacting Makita they informed me I could buy an adapter chuck, however the do not recommend them as they can lead to the machine overheating.
Marked down one star as the information/description does not highlight this.
Very powerful for the size
This is my first and best sds drill, very powerful and very easy to drill into bricks and even in concrete(where a cordless will not cope at all) in seconds.
workhorse
I found this to be extremely versatile, great for removing wall tiles quickly,drilling into brick effortlessly,fitting curtain rails to concrete lintels,removing bricks with the brick removal chisel without damaging the bricks,etc.If you are renovating a house,and you are a professional builder or diyer,this tool is invaluable and properly lubricated should last a long time.
Does what it doesn't say on the ti
I bought this as a cheap SDS drill and it seems to work quite well. I especially like the integrated auxiliary handle which is easy to adjust. And you can control its tightness which seems useful as a safety feature if you’re getting kickback.
The main weakness seems to be the instructions. The exterior packaging doesn’t even mention SDS and the written instructions are too generic, describing a variety of models in a confusing way. To really understand the drill, it’s best to go online where there are some good YouTube videos which explain and demonstrate it.
There aren’t any accessories but I wasn’t expecting any. I already had some huge bits for the specific job in mind and will get more as needed.
Great drill overall.
Fantastic drii. Effortless going through brickwork. I cut the four inch hole for my vent on bathroom fan. Took about ten minutes. Used drill bit making a series of holes in circular fashion.
Brilliant drill
So very glad I decided to buy this drill, I wish I’d have bought it years ago. The power it has is remarkable, it makes holes in brick as though there’s nothing there.
100% happy so fa
Very capable piece of kit!!
Bought this drill as my old hammer drill was just not capable of tackling the hard walls in our house. Used this the first time and it drilled through the wall like a hot knife through butter. Makita certainly know what they are doing.
Gets through concrete that my old regular hammer drill failed to.
Solid and effective. Bought this as I live in a place with concrete walls and ceiling and making holes is a challenge. I’ve a perfectly respectable standard hammer drill with regular masonry drill bits, but have found it difficult to get it to work. This Makita SDS drill is a big contrast – it manages to chew through the concrete without difficulty. Just remember that you need to buy SDS drill bits to fit.
Recommended.
5.0 out of 5 stars Tough drill
This SDS drill makes drilling holes in masonry fast and easy compared to a non-SDS drill. The chiselling is very good too.
Chunky bit of quality kit.
Only used this for chiselling hard mortar from paving so far, but it’s performed really well. It is a substantial item and does get warm when using on hammer setting, but it just keeps going. Paired up with the Heller SDS+ Plus 6mm Brick Mortar Rake Joint Chisel/Breaker, it sliced through the mortar and saved me days of hand work and the wear and tear on my joints!
Tremendous bit of ki
Tried a normal hammer drill in my garge floor for 15 minutes and got nowhere. with new Bosch drills. This went through it like butter.
Fabulous value
had a large granite rock to carve a shelf out of (to fit a garden thingy) on hammer setting , this made light work of it and it produces fast and clean drill holes too, sturdy case with it and overall brilliant value!
Well made
Superbly made and has plenty of power when drilling brick and concrete
Brillia
Excellent drill, as with all Makita power tools it’s quality. Great value for money.
Fantastic drill
Bought this after my old drill dies when cutting a hole through my garage wall. Fitted a bike rack in my garage, had to drill into concrete lintels, amazing, took seconds, like a knife through butter. But it, good value for money, great product.
Extremely versatile and powerful drill even into hardened stone.
What can I say other than wow what a drill. My father let me use his 110v version of this and this 240v doesn’t disappoint either. With the right good quality drill bits this sinks into hard stone like a hot poker through butter. Very effortlessly does what it should and by far one of the best drills I’ve owned as a DIY person.
Drilled a 100mm hole with a diamond core bit with ease
Even though Makita states this will only drill up to 80mm holes with a diamond drill bit it did a 100mm hole with ease.. as well as taking back my plastered walls to brick.. for the price point it’s a great drill..
Excellent Tool
Not allot that can be said about the Makita brand that isn’t already widely known amount both the Professional and DIY users. I have employed this SDS drill to chase out old concrete on a Granite wall to make it ready for pointing, removing old floor tiles set in a cement bed and to remove the concrete behind an old fireplace. As a medium range SDS drill this is a great tool to have around and worked well in both drill and hammer mode (when using as a chisel).
It is heavier than your standard drill but not so heavy as to make using it a chore, providing you don’t push this drill above its comfort zone I’m pretty sure it will last a decent amount of time and will pay for itself quickly when used on the job. Always make sure you buy good quality bits.
SDS hammer drill
The makita SDS drill has worked well used to drill hundreds of 12mm holes for a damproof cause with a chisel to remove old plaster and also to chase out for the first fix electric a reasonable All rounde
Great SDS drill
Great SDS drill simple to use good quality has done some tough jobs already and made them a breeze. Long cord which is great as nothing worse than having to use extension lead on every job.
4.0 out of 5 stars Was well worth the money. Sorry I didn't get one years ago
Putting up shelves and curtains rails only took Minutes to drill the holes
The only masonry drill you will need for DIY
Very impressive. Can put a 12mm hole in masonry like a hot poker through butter, and capable of getting a 120mm hole done for external vents. Not my first or last Makita tool. Stop browsing others and buy this, you won’t regret it :). More than capable of any DIY masonry work.
Why didn't I buy one before
Had a specific job that I needed a SDS drill for so finally thought I’d buy one instead of trying to borrow, especially during lockdown. Checked a few out online with reviews and also by checking others regarding brands. Went for this as brand has decent reputation and not the cheapest but model is probably good for the home DIY’er. Did what I needed easily and with no problems. Regretting not buying one sooner and seeing how well it drilled through an outside wall will be going back to some fencing that I put up in the summer but not satisfactorily as the regular drill couldn’t cope with concrete I was trying to fix the posts to. Happy with the purchase.
Good quality produc
Very powerful little machine. Goes through stone easily with Makita bits. Very pleased
excellent drill
eeded a SDS drill for work, this came highly recommended from numerous sauces, used it a number of times and can’t fault it. got it for excellent price from AMAZON, fast delivery, very happy.
Good Value bit of kit.
Bought as a gift for my Plumber Son. He loves it just what he was after.
Very good 240 volt drill
Nothing apart from my mistake , I wanted a 110 volt and never read the print correctly
Two thumbs up!
Super all rounder! Having a drill that has three functions of drilling, hammer drilling and chiselling in one is a winner to anyone’s tool chest especially with the quality of Makita!
A hole in one
Amazing drill best I’ve ever had for masonry. The only down side is the drill bits I had I could not use so has to buy new sds plus drill bits. But worth the pain as i can drill through brick and cement like through butter.
Should have bought 1 years ago!
Purchased to do the heavier duty masonary work which I was using my battery combo drill to do.
Should have bought 1 years ago!! Makes light work of everything I need to do. I would be stood there for ages with my combo drill trying to drill holes in brick – and not doing my drill any favours what do ever!
This thing just flies through anything I’ve put in front of it.
Usual Makita quality with a nice sturdy case too. Bought the Makita SDS drill bit pack too.
Will last for years
Good drill
Excellent drill as good as the bosch gbh2-26
Works well with diamond core bits
Good torque limiter to save your wrists
Sds + …not a chuck… its in the description…Read it numpties, buy an sds+ chuck ..duh
Not supplied with drill bits …why would it ?
Makita produce well made bullet proof kit , own lxt cordless too, buy them too
Other inferior products are also available
does what it says on the ti
bought because of the light weight, number of hits per minute and most importantly the Joules of the hitting. compared to old hammer drill which took 10 mins to get 1 cm into old concreate flooring slab, this took about 15 secs to drill the 25 mm I needed.
Very pleased with it 🙂
Edit after a year – its dam good, mine came with no drills but its got some real power and very happy with i