Makita JN1601/2 240V 1.6mm Metal Nibble
Makita JN1601/2 240V 1.6mm Metal Nibbler
The JN1601/2 240V Metal Nibbler is powered by 550 watt motor to deliver up to 2,200 spm for faster, smoother cutting.
The JN1601/2 performs clean, precise cutting in keystone plate, deck plate and other corrugated/trapezoidal sheet materials, handling 16 gauge mild steel and 18 gauge stainless steel.
The JN1601/2 is equipped with a slim body designed for easy gripping, die holder swivels a full 360 degrees for easy cutting at an angle to grooves in corrugated/trapezoidal sheet materials and a lock on sliding switch for continuous operation. The JN1601/2 has a built in thickness gauge for user convenience.
- Maximum cut in mild steel 1.6mm
- Maximum cut in stainless steel 1.2mm
- Maximum cutting outside edge 50mm
- Radius inside edge 45mm
| Weight: | 2 kg |
| Dimensions: | 31.5 x 8.5 x 21 cm; 2 Kilograms |
| Model: | JN1601 |
| Part: | JN1601 |
| Colour: | Blue/Black |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Makita |
| Colour: | Blue/Black |
| Quantity: | 1 |
It cuts like butter. It leaves little crest moon pieces. No big deal. It goes right over the ridges.
Makita has always made a decent tool, but lately they’ve been above the rim with their product line. This item is no exception. Very good quality, exceptional ergonomics and general ease of use make this very effective tool worth purchasing.
This bubbler is an absolute must have if you’re cutting metal. I’ve done two houses and a pole barn with it. Definitely worth every penny.
It takes a few minutes to get used to the cutting action of the tool but after a few cuts it’s second nature any angle cuts or crosscuts on metal panels make this tool worth every single penny you’ll spend on it.
I purchased a pre fabricated steel building and had to cut the sheet metal to fit the frame. This tool paid for it self the first day of use. As fun as making a ton of cuts with tin snips, this tool saved me hours of time no doubt. It’s also fairly easy to use.
I used this nibbler to cut 150′ of metal roofing. It performed flawlessly. Much easier and safer than using tin snips.
I recommend wearing ear plugs, gloves and safety glasses when using this tool. It punches out small moon shape cuttings that can be swept up or picked up with a magnet.
Tolles Werkzeug, nach ein paar Proben hat man sich daran gewhnt. Geht schneller als mit der Flex und es gibt keine Grate am Blech. 0,75er Blech, Doppellagig kein Problem.
Good value for a hobbyist, easy to use and worth the $ for those tricky angles.
We needed a replacement nipper as don as possible when ours quit working! I ordered this one and it was here within 2 days, brand new sealed and we were able to finish cutting the sheet metal for our house! I couldn’t be happier with my purchase!
It did the job I bought it for (re-siding and roofing a small shed), but cutting a straight line does take some practice and the cord requires a lot of wrangling to keep it away from the cut edge and out from under foot.
Overall it worked fine, but if this is a tool you intend to use a lot, I would recommend looking at a cordless model.
Finally spent the money to get a steel nibbler after years of building pole barns and hand cutting the steel with snips. Won’t go back, this tool does clean angle cuts, circular cuts and straight cuts in seconds. Still would recommend a drill-mount shear or other shear for long vertical cuts, but this leaves nearly no burrs, and a strong roller magnet easily picks up all the crescent moon pieces this tool spits out. Wish I had this years ago. Recommended.
Htte ich sie schon frher gekauft, htte ich mir schon viele Stunden gefriemel mit Flex und Blechschere gespart. egal ob 3mm Alublech oder Trapetzblech. Alles wird extrem schnell getrennt! gerade schnitte gehen nur mit viel bung oder evtl eine Fhrung drann basteln.
If your working with corrugated metal, this is a must have tool.
Doveo rivolgermi ad un taglio laser 3D , invece lavoro fatto eccellente.