MPT 1 Inch SDS-Plus 1050W Heavy Duty Rotary Hammer Drill,3 Function and Adjustable Soft Grip Handle,Include 3 Drill Bits,Point and Flat Chisel with Case
MPT has more than 20 years experience of high-performance tools.
MPT focuses on Professional Tools, including power tools, hand tools, pneumatic tools, cordless tools, gasoline tools, welding machines, pressure washers, generators, water pumps, as well as related accessories, etc.
Technical specification
Power source: Corded
Voltage: 220V-240V
Frequency: 50/60Hz
Input Power: 1050W
No Load Speed: 930r /min
Impact Rate: 0-4500/min
Concrete capacity: 1 inch
Steel capacity: 1/2 inch
MPT MRH2603 Rotary Hammer
Product Appearance
Color: Red & Silver &Black
Package Size
Length: 16.7inch (42.4cm)
Width: 12.9inch (32.8cm)
Height: 4.8inch (12.2cm)
Weight: 15.2lb (6.9KG)
Package Includes
MPT MRH2603 rotary hammer*1
8x150mm drill bit*1, 10x150mm drill bit*1, 12x150mm drill bit*1
14x250mm point chisel*1,14x250mm flat chisel*1
Auxiliary handle*1
Replaceable carbon brush*1 set
Cap*1
Instruction book*1
| Weight: | 6.9 kg |
| Size: | 1050W |
| Dimensions: | 42.4 x 32.8 x 12.2 cm; 6.9 Kilograms |
| Part: | UMRH2603 |
| Colour: | Red |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | MPT |
| Colour: | Red |
| Reference: | UMRH2603 |
| Size: | 1050W |
I’m very happy with the drill made life so much better with the job I had to do
Having tried to drill into a concrete lintel above a door and failed many times using a Dewalt 18V cordless and Bosch concrete drill bits, I decided to purchase this MPT SDS-plus hammer drill.
I used the rotary/hammer setting and using more Bosch drill bits I had another go and wow was I surprised. It was like drilling into softwood. The concrete lintel offered no resistance at all to this drill and several holes later the job was completed within minutes. If you need to drill concrete, then this is your drill. Excellent.
I should just add that I haven’t used the hammer only setting so I can’t give an opinion on that yet.
Purchased to chisel through an old fence foundation (about 40cm x 30cm x 2m) made of concrete to make a small hole for planting and wasn’t sure how well this would work. I was pleasantly surprised.
Don’t get me wrong the bigger heavy duty breakers would have done the job quicker but would have cost 100 more and less versatile. This however cuts through concrete with relative ease and after about 2 hours I had my hole.
Very sturdy piece of kit and the chisels still don’t even look used. I bought this in a lightning deal at 49.99 so it was a massive bargain and hugely impressed with the quality.
Good value for money. I had a couple of jobs lined up for this and it was almost as cheap as hiring one. Needed to break up and remove an old concrete base for a rotary washing line and it made easy work of it. Probably not good enough for professional use but def good for diy. Recommend
This is a great SDS Drill. Incredibly tough and does exactly what it says on the tin. Helped me pile through concrete fence post bases in no time. Bayonet filling to the chisel set.
I bought this to break a wall from top to bottom which meant breaking breeze blocks in half. It chopped off the piece I needed gone in half an hour or so. Definitely paid for itself and I still have a very capable drill and breaker. Well worth the money.
I purchased this kit to put a garage defender lock in. Done the job in 15minutes.
Extremely powerful, good accessories.
Would say the instructions could be slightly better but excellent for the money.
This is great for chasing walls. Easy to use not heavey at all
Multi function, good value but a tad heavy for the average worker. Proof of the pudding is in the eating.
My garden posts had snapped with the bad winds, I was able to break the cement / concrete in order to replace them by using this tool! It worked perfectly!
This hammer drill done exactly what it was designed to do for about 2 months, then stopped working with sparks coming out of the casing ,
I’ve sent am email to the company but have received no response yet ,
Very poo
This was a great product for the removal of excess concrete we found while remodelling our patio. We managed to complete the job in a speedy and effective way.
Easy to use, light weight, excellent product, well worth the money, arrived next day, brillia
Easy to use and comfortable when using this machine, makes light work of drilling through stone very impressed
Good value for money and does the job very well
I bought this SDS drill after reading reviews. It’s not so heavy to use as reviews mentioned. I’m not a big strong bloke but I’ve used it one handed to break concrete post mix. This drill comes in a good case with a point chisel and a spade chisel. 3 useful sized drills too.
I bought it because I’m doing up my rear garden and concrete post mix has popped their heads which a hammer and chisel had no effect. This MPT didn’t break the concrete like a hot knife through butter but it did break 18″ thick concrete quite admirably. Well worth the price. Its a drill I’m glad I bought.
Bought this for the chisel mechanism to break up some concrete foundation beneath a garden ramp I removed. Really easy to use and made easy work of breaking up the concrete into more manageable chunks.
The drill has a fair weight to it, but this is to be expected for the nature of the jobs it is intended for.
Incredibly good value for money, especially if you only plan to use for the odd one off job. It was certainly cheaper for me buying this and carrying out my own work than accepting quotes around 1000 to get the job done.
This drill is top ranking, I’m the original Jeremy Clarkson when it comes to building work but this drill made everything so easy, easy to set up and use, went through concrete with ease.
Great bit of kit, wanted it for drilling 10 25mm holes for anchor resin, a piece of cake.
I’ve just received one of these. I probably didn’t need this beast! I chose this one because every review I read of other drills said they were too weak to get through brick & stone. My ancient 1970’s Black & Decker could make no impression in our garage wall, so I had to replace it. I barely even switched this thing on and it was straight through. Incredible. This is very powerful indeed. If you want something to chisel channels into the walls for wiring for example, this machine is your buddy. Fantastic, buy with confidence.
At my second attempt, I drilled into a concrete lintel with the hammer action in less than a minute. But, I had to go online to follow the instructions for a very similar drill. It appears this drill may be an example of “reverse engineering”. I will be contacting the manufacturer about the user guide. Otherwise, I am now happy with my purchase.
For years I struggled with my old drill until I took the plunge and replaced it wow this is a fantastic drill with loads of power.
Great value drill for the money, used a couple of times with no issues as in some feedback reviews.
Good sturdy drill at decent price time will tell how much abuse this can take but its holding up well so fa
Heavy duty SDS masonry drill with chisel action. Having never used one before or even seen one being used I took a chance as I had really bad pointing and stonework to sort out. The drill is nicely boxed and comes with two chisels and three drill bits. also a depth guide, spare brushes and grease. The chisel action is amazing and has completed the work in next to no time. Well worth the money and would highly recommend.
Bought this to break up concrete at bottom of fence posts – and this tool makes short work of that task.
In fact you need to watch out for the strenght of the hammer function when using the chisels – very easy to hammer too deep into the concrete and end up getting the chisel stuck.
And the SDS/Slotted Drive System makes switch of chisels / drills is so easy – just pull back the chuck and change drill bit 😉
A perfect addition to anyones DIY tool collection.
Only very very small negative point i found when using was that the mode switch initially was very stiff/hard to move
but after a couple of turns it loosens up.
I bought this to take down a garage, which it did pretty well.
However, the dust from the bricks got into the fitment and now I cannot remove the chisel bit. We’ve tried all sorts a it stuck fast. So if you go with this model, I’d suggest stopping every now and then to clean out the fitting to ensure the bits are easily removed.
Used to break up a concrete path to put in posts.. great tool for light concrete. Did the job nicely. Not suitable for heavy stuff. But for a small hammer it works extremely well
Bought to break out concrete around fence post after previous ‘other manufacturer’ drill/breaker motor burnt out. This completed the job with no issues. Have not used for prolonged periods.
I needed something strong to demo my 1950’s bathroom tile and mortar. I was swinging a sledge hammer and the tile wall would not budge. I rented one of the expensive ones from Home Depot for a day ($70 per day) and found out that this demo project was going to take a lot longer. I decided to buy this one because of the good reviews and price. I will say that I am shocked at how good this one works. It works even better than the $1500 one I rented. Feels well built and strong. It’s only been a few days, but I am happy with the purchase. Highly recommend this hammer drill. You will not be disappointed!
I needed to break up a Fireback in my fireplace to open up the builders opening and it made easy work of it and cleaning up all the old cement and plaster around the associated wall, flue etc. Has a strong electrical smell but I assume this is just the normal heat associated emissions related to a new electrical device. Am sure it will dissipate over time.
Good and heavy worked really well best value for money
I needed to put in a load of new sockets and the bricks we have in the walls are especially tough and my ordinary corded drill struggled to get into them. This monster came with 4 bits plus a pick and chisel. After drilling a bunch of holes the chisel function made mincemeat of the briicks and I had the required hole in no time. It is big, heavy and does what is says on the tin in no time at all. Great value for money.
It was used with The hole cutter to make a hole in a 5″ concrete wall.
Good value for money doesn’t quite have the power of those 3 times the price, but it gets the job done well. Very food value for money, you even get a set of chisel bits and spare brushed would buy again. You can buy exactly the same drill in aldi right now with 10 bits included and its1500 watts for 39.99. 3 year warrenty
Used half a dozen times now, not a bad bit of kit for the money.
Drill holes in my walls with ease where my 240v hammer drill fails miserably. Also, the chisel works a treat! It demolished my fireplace no trouble at all.
Fab tool for the price. Has proved invaluable with my house renovation.
Product does everything described, also drill and chisel sets supplied are good quality too, for the money it’s worth it every day.
Durable hammer that comes with a nice array of chisels and bits. Worked well to pull up a living room and kitchen floor consisting of 2cm heavily mortared tile and will be using to pull up the floor in the rest of the house. This is a brush-type motor and unfortunately one of the two original brushes wore down very quickly, but after replacing the brushes with a set that came with the hammer drill, I was back in action. Contacted the seller and the company was nice enough to send a couple free sets. The next set seems to be wearing evenly, so probably just a one off issue.
This drill makes light work of drilling through hard materials such as brick.
I bought this drill when my old hammer drill kept on failing when I needed to put up some heavy duty hooks into masonary.
The drill is nicely boxed and comes with some well engineered bits.
On the down size is the weight but this has to be off set against the price and the fact that it has a chisel feature which other similarly priced hammer drills do not.
got this for digging out concrete at bottom of posts did job very well
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
I haven’t used it for anything else but it comes with a few big beefy bits and chisels and the jack hammer function is a great bonus. So far I’m impressed.
This is a great SDS hammer drill.
Very powerful and sturdy looking. It just smashes through stuff. Appreciate the sturdy handle and clutch feature which helps to avoid getting hit when the drill bit gets stuck resulting in a sudden whiplash effect.
The drill comes with a few standard accessories in a hard case which keeps it all together.
Very good value, price for power. I wouldnt say it’s lightweight but that what adds to its force and getting though materials quickly.
Is quite powerful for the price used iit for cutting out brickwork and block work quite light and easy to use good selection of chisels seems well made and strong
it did the job I bought it for, removal of ceramic floor tile, it worked very well but did get heavy after 1 hou
For a cheap tool I would put it on the level of big brand tools
Broke up concrete and drilled holes I needed with ease. Worth the money, wasted money in the past renting brand name hammer drills.
Can’t say what durability is . Just haven’t used it that much but the quality seems ok for the price.