NEJE Master-2s Max 30 W Laser Engraver Cutting Machine Professional Laser Engraving Machine CNC Laser Cutter APP Wireless Control 32-bit Motherboard Large Working Size 460 x 810 mm (Module 7.5 W)
Professional Engraving Tools For Senior Designers
NEJE is committed to developing DIY engraving tools that are suitable for personal / family use. Currently we already have many high quality products. High efficiency, easy operation, high quality.
Can Not Engrave:
Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material
Multifunctional engraving machine
| | | |
|---|---|---|
Multiple ways to controlNEJE has developed the NEJE APP and NEJE software for inexperienced CNC creators who can complete professional engraving effects with a very high degree of automation. and provides full GRBL control such as Lightburn and LaserGRBL to aid professional CNC designers. | Easy to installThe machine is easy to install and only requires 6 screws to assemble. The product package contains all the accessories required for installation, and we also provide paper and wooden blocks for testing. | Intelligent laser moduleThe module adopts a silent design. Intelligent driver, dynamically adjust the fan speed and working status according to the temperature. No need to worry about noise affecting others. |
| | | |
|---|---|---|
Working areaThe large engraving area of 810x460mm, within this range, you can complete the large patterns you want. | 10800 x 6133px pixels10800 x 6133px pixels, make sure the picture quality is fine and accurate. | Concise styleThe max 30w laser engraving machine adopts a full-frame design, which improves product stability. At the same time, the machine is easy to use and can be used when plugged in. |
Software
- LightBurn
- LaserGRBL
- NEJE APP for Android
- NEJE Wireless APP for iOS / ipadOS / macOS
- NEJE software for win 7 / win 8.1/win10 above
Excellent performance
- The NEJE Master 2s series motherboard updates the GRBL 1.1f of the ATMEL chip to the brand new GD32 MCU. That improved the performance by 50% compared to the STM32 chip.
- It can preprocess 32 instructions, supports a baud rate of up to 2,000,000 and is more powerful!
Packing List:
as the picture shows
General Specification
| Model | NEJE Master 2s MAX 30W Laser Engraving Machine |
| Module | N40630-7.5W |
| Output power | 450 nm, 7.5 W. |
| Output voltage | 12V 3A-4A |
| Image format | .bmp .jpg .png .nc .dxf |
| Control Board | 1 x MCU + Wireless control + MEMS |
| Cutting plywood | <5mm |
| Cutting birch plywood | <2mm |
| Cutting MDF | <4mm |
| Cutting black acrylic | <2mm |
| Cutting leather | <10mm |
| Cutting soft wood | <8mm |
| Weight: | 4.74 kg |
| Size: | MAX-30 W engraver |
| Dimensions: | 96.2 x 39.9 x 16.5 cm; 4.74 Kilograms |
| Batteries Required: | No |
| Manufacture: | NEJE |
| Size: | MAX-30 W engraver |
Assembly was very straight-forward, and much easier than on my previous smaller laser cutter.
This also works without problems with T2Laser software, which for some reason isn’t mentioned in Neje’s listings, but which for my purposes (cutting from dxf files) works extremely well.
Even for cutting cardboaqrd though, you will want to upgrade to a stronger laser unit to increase cutting speeds.
A2 sheets fit easily into this units. It would be even better if the unit was just slightly wider, so users could get A1 sheets (841mm wide) into it without cutting them down first.
Over-all I’m very happy with this unit, using it with an A40640 laser module though.
Easy to set up, took around 20mins, downloaded drivers for Mac and use in lightburn and so far excellent results, great machine..so fa
Easy to set up, took around 20mins, downloaded drivers for Mac and use in lightburn and so far excellent results, great machine..so fa
Took a while to get it set up and working with lightburn.
Really enjoying using it.
Be prepared to pay out extra for air assist pump and nozzel, extractor and aliminuim honey comb for base
All set up and cuts 3.6 mm hardwood ply clean in 3 passes at 3 mm a second. Cuts 6mm softwood ply in 6 passes. Will not cut 7mm bamboo ply even with 20 passes.
Very accurate moters.
Joh
Took a while to get it set up and working with lightburn.
Really enjoying using it.
Be prepared to pay out extra for air assist pump and nozzel, extractor and aliminuim honey comb for base
All set up and cuts 3.6 mm hardwood ply clean in 3 passes at 3 mm a second. Cuts 6mm softwood ply in 6 passes. Will not cut 7mm bamboo ply even with 20 passes.
Very accurate moters.
Joh
However from all the machines I have used I do miss the Z axis, not much of an issue just means I have to manually adjust sometimes if I’m using a thicker material
Also the android app for this is not the greatest, there is not much control, and the ones it does have aren’t very clear. I suppose it could be okay for a beginner to send an image too quickly but as someone that has abit if experience with lasers, it feels clunky and the output isn’t as good as it can be. Comparing the android Vs the pc control, the pc wins hands down. This is my reason for dropping a star. But I would recommend buying this.
I use Lightburn, it is the best software I have found for lasers.
Obviously if you are new at this … lasers burn materials and this causes smoke/dust … I’d recommend planning to make your own fume box or put in a well ventilated area.
However from all the machines I have used I do miss the Z axis, not much of an issue just means I have to manually adjust sometimes if I’m using a thicker material
Also the android app for this is not the greatest, there is not much control, and the ones it does have aren’t very clear. I suppose it could be okay for a beginner to send an image too quickly but as someone that has abit if experience with lasers, it feels clunky and the output isn’t as good as it can be. Comparing the android Vs the pc control, the pc wins hands down. This is my reason for dropping a star. But I would recommend buying this.
I use Lightburn, it is the best software I have found for lasers.
Obviously if you are new at this … lasers burn materials and this causes smoke/dust … I’d recommend planning to make your own fume box or put in a well ventilated area.