Camera Junction Box, 8pcs Waterproof Junction Box for Surveillance Camera, Security Camera Mounting Box, CCTV Junction Box
Suitable for Security Camera
This junction box is not only suitable for OOSSXX security cameras, but also fit with bullet cameras and dome cameras of other brands.
Waterproof junction box for indoor and outdoor use
Aluminum material can use for a long time.
Product size: Outside diameter:3.94 inch, plate center hole: 0.98 inch, Height of box: 1.96 inch
Package include: Package include: outdoor junction box *1, screws*1
| | | |
|---|---|---|
WaterproofThe product is made of aluminum. It can protect the camera connector, reduce rain erosion, and slow down the aging rate. | Anti-StressThe product is made of hard aluminum. Even when it suffers minor damage, there is no damage. | Stable performanceHeavy aluminum construction, waterproof and stable, it will ensures waterproof box durable and stable performance. |
 |  |  |  | |
|---|---|---|---|---|
| colour | white | white | white | white |
| Weight: | 2.4 kg |
| Dimensions: | 10.16 x 10.16 x 5.08 cm; 2.4 Kilograms |
| Model: | OSX-93729 |
| Part: | OOSSXX |
| Colour: | 8 |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Manufacture: | OOSSXX |
| Colour: | 8 |
| Quantity: | 1 |
It is half the price of Reolink junction box.
It is very sturdy, made of metal, put up some weight.
It is well sealed from water.
Most importantly it fits my Reolink cameras.
The product arrived on time although deliveries from the Southampton depot are getting later and later in the day which is a nuisance, my only comment re the junction box is that the entry on the side and bottom are too close to the base to enable a conduit connection nut to be used so useless for that type of fitting. Otherwise very pleased and yes I would recommend.
Work well with the two Reolink cameras I have. I did have to make some new holes to mount my dome camera but that was easy with a combi drill.
The box has plugs in it and some have a hole ready for a cable. This home perfectly fit my 5mm pre terminated ethernet cable.
Maybe expensive at 10 a box but worth it.
ordered this for the TP LINK 310 , there are no compatible holes for the cameras mounting plate , only manage to get 2 screws lined up and camera not centered .
Good quality material , no to sure on the water resistant side , not yet installed but will be adding silicone behind on wall side and around hole for extra weather proof.
Bought 2x Single units. Both packs came with 2x IDENTICLE packs of screws (so plenty of spare hardware). No instructions, so I used the rubber seals on the screws holding lid to base. Cut the 2 drilled hole plugs so I could fit plugs around cables (the cut closed up and made a good seal on cable when reinserted into hole in box). Paired boxes with Reolink RLC-810A cameras, perfect fi
Should be standard for the Reolink 4 k cameras. You can fit all the connectors in these boxes for weather proofing.
Just bought and fitted four of these as back boxes to a Yale 4 camera system. Predrilled holes matched camera base holes. Strong sturdy boxes had to use 25mm compression glands for cable entry with inserts as the white predrilled plugs are made from a type of rubber which will not stretch to allow a BNC cable end to go through. The hole in the back of the box is the same diameter as the two side entry ones so there is no problem when passing 3 cables through it.
i bought these to hide the camera to cable connections inside so if any camera ever goes faulty i dont need to pull all the wire out too these are water proof and really sturdy had them up a couple of month now no issues the rubber seal that goes between the face plate and the box can be a bit fiddly if it gets moved or comes out however once you get it in place works a treat just remember to check all around before fully tighting the face plate screws as the rubber can twist a little but easily rectafied.
Brackets were study and easy to install. Was able to get the camera system up and running very quickly. I recommend.
These boxes are very nice quality, hole plugs are not the greatest but work in most situations. This is NOT a sealed box; pay attention to what you need and where you are putting it. ALSO This does not match mounting holes for any of my Avalonix cameras!! I used these to protect the wire connections but had different mounts for the cameras, so they worked well for me but it is common for any brand box to not fit a camera. Hard to know until you buy everything. Hope this review helps.
Installate a casa con telecamere Reolink, prodotto completo, robusto e molto professionale.
I molteplici fori si adattano a quelli di ogni telecamera.
Completi di guarnizioni e viti.
Non per ultimo il prezzo molto competitivo.
Super consigliate!
These were perfect for my Reolink cameras, coming in much cheaper than Reolink’s own junction box and appeared to be smaller. It took a bit of jiggling round to find a set of holes for my cameras (RLC-410), but I got there in the end.
The boxes are solid and fit together very nicely with no gaps. The wall plugs are fairly poor quality, but that can be said of almost all wall plugs I find bundled with wall-mounted items. It’s cheap enough to go out and get some better ones, and the screws are perfectly serviceable.
I think the rubber plug through which the camera cable is presumably meant to be routed could be improved by having a cut across its radius. The hole is so small that there was no chance of threading the Reolink cables through. That being said with the cameras installed and with a little bit of sealant for extra protection, there’s no chance of water ever finding its way through so it’s not a problem.
Good for my Cameras and this product has lots of holes so fits all models.
Easiest way to find the correct hole is to turn the face upside down and fine the holes.
Its expensive but worth the price. Its very sturdy and made well.
I am very pleased with the quality of the meterial and finishing details of the produt. I perfectly worked for my camera (Reolink) and was usable for other designs & brands as well. After installation, it looked perfectly smart and tidy. The connecting part of the cat 6 cable easily fitted inside.
All srews, plugs, etc. was included in the package.
I used these boxes to fit with Reolink dome cameras. However the holes didn’t line up so I simply drilled the Reolink bases to match with a set of holes on this box. Once done it worked fine.
I’m sure they work for other brands with no problem. Sturdy and well made. Better than Reolink D20 units which are too big and are ugly as a result.
Wir nutzen die Dosen fr unsere RLC-410-5MP Systeme von Reolink. Passt perfekt. Hochwertige Verarbeitung, Schrauben dabei alles top! Fr den Preis definitiv eine Empfehlung wert! Billiger als die Originalen Reolink Dosen.
Scatola di derivazione per telecamere molto robusta e adatta per ogni evenienza.
Come si pu notare dalle foto sul coperchio vi una predisposizione per varie tipologie di telecamera.
Nel mio caso reolink 810a. Le predisposizioni sono gi maschiate e in dotazione ci sono gi i tasselli per il fissaggio a parete, le viti per il fissaggio della telecamera al coperchio(4), guarnizione adesiva da porre sul retro a contatto con il muro.
L’ingresso cavi della camera ampio, io ho sfruttato il gommino che si vede in foto, facendo un taglio fino al centro e facendo passare il cavo rendendolo cosi ermetico dall’esterno.
I cavi della telecamera ci sono stati all’interno, non ho usato il kit fornito da reolink per rendere stagna la presa rj45 ma non ne esiste il motivo.
Sicuramente un acquisto azzeccato.
Die Kameradose ist sehr gut verarbeitet und hlt was sie verspricht. Sie lsst sich wohl gut unter Putz einarbeiten als auch berputz anbringen. Ich habe Sie fr die Annke berwachungskameras im Einsatz. Ich musst sie zwar hierfr etwas modifizieren, was aber mit wenig Aufwand problemlos mglich war.
Thought they would be ideal for mounting Hiseeu wifi cameras, they do the job but you have to alter them by drilling holes to fit the camera bases and use self tapping screws to secure. Good quality but a little expensive.
Prodotto ben realizzato e resistente.
Facile il montaggio con le telecamere reolink810a.
I cavetti restano all’interno senza difficolt.
Sempre perfetta la spedizione.
CONSIGLIATO
Montate le scatole con facilit.
La struttura robusta e hanno ottime predisposizioni per fissaggio
Vi consiglio di prendere degli stop pi validi e il montaggio sar perfetto
Mithilfe dieser Anschlussdose ist es ein Kinderspiel, die Kamera inkl. der Anschlusskabel, zu montieren.
Die Dose bietet ausreichen Platz zur Unterbringung der Kabel, auch fr eine RJ45 Buchse.
Aufgrund der zahlreichen Bohrungen, passt vermutlich fast jede Kamera mit ihren Bohrungen auf die Dose.
Die Verarbeitung ist sauber, das Material macht einen stabilen Eindruck.
Klare Kaufempfehlung!
Zeer goed voor Reolink camera’s de schroefgaten komen mooi overeen en het is een zeer stevige en solide aansluitdoos uit aluminium. Het heeft zeker een meerwaarde bij de plaatsing van de camera. Er zitten voldoende dichtingen bij zodat er zeker geen vocht kan binnendringen in de aansluitdoos. Alle kabels van de camera passen er vlot in en samen met de camera is deze aansluitdoos een mooi en stevig geheel tegen de buitenmuur. Ik zou dit product zeker opnieuw kopen en aan iedereen aanbevelen omdat het de montage van de camera makkelijker en mooier maakt want er zijn geen kabels zichtbaar.
Great product, easy to install, but the screws included to attach a camera to the box kept breaking off and we had to go buy sturdier screws. Other than that great product.
Sehr gute, robuste und qualitativ hochwertige Ware.
Wir sind sehr zufrieden mit den Anschlussdosen und knnen es beruhigt weiterempfehlen.
Die Reolink RLC-810A Kamera passt sogar ohne jegliche Verndungen auf die vorhandenen Gewinde.
Easy to use, tidied up the cables nicely. Good sturdy product.
I purchased this item so I could mount a security CCTV camera onto junction box and also to provide a 240volt mains waterproof supply connection. The junction box is made of high quality, very strong/durable with waterproof seal. It came with all the fittings including plugs, screws and push out rubber seals. I am very happy with the product and have given it a five out of five star rating.
super Qualitt, Material aus Aluminium, einfache Montage, Schrauben von der Kamera und Lochversatz auf der Dose haben super zusammen gepasst.
I bought these to mount my reolink D500 and B500 cameras. I had considered the cheaper plastic boxes and briefly looked at Reolink’s own offering which we way over priced at 30! (More than half the cost of the camera!?). These seemed like a good compromise and the TLDR is i’m very happy with them. I’ve read some reviews that note that they are not compatible with the Reolink D500 dome camera but they had been made to fit, so i was prepared to make some adjustments before buying. The B500 camera fitted without any issues as the camera baseplate holes lined up perfectly with one set of the many (threaded and sealed) hole patterns in the junction box lid. For the D500 dome cameras, I placed the mounting template supplied with the camera on the junction box lid and transferred the widest hole pattern from the junction box lid to the template, then to the camera base plate. Drilling a new hole pattern in the plastic camera base plate was much easier than drilling the aluminium junction box lid (as some have suggested). There’s plenty of room inside the junction box to take the POE RJ45 connector and the additional power connector and reset button fitted to the Reolink camera tail. The lid is sealed with a rubber gasket. There are also ‘O’ rings supplied to seal the screws. Rubber grommets are supplied to seal the cable entry ports. Overall, a great quality, well thought out junction box, which is certainly better engineered that the cameras that i fitted to them (the Reolink D500 base plate is very poorly designed in comparison to these boxes!). Highly recommended.
Super hochwertige Halterung, stabil und robust. Kamera lies sich ohne Problem drauf montieren. Hlt jetzt schon mehr als ein Monat und berstand der Sturm ohne wenn und aber.
Top Produkt! Genau das was man braucht um eine Kamera ORDENTLICH und professionell zu befestigen. Und das ohne Kabelsalat. Top!
Scatola di collegamento ben fatta, resistente e robusta. I cavi della videocamera entrano alla perfezione. Sono compatibili con telecamere di diverse dimensioni. Consigliate
I have my own business of installing security cameras. I purchased several wall mounts for my line of cameras from you. I was very happy with quick delivery and the good quality of your products. Thanks.
Die Kameraanschlussdose ist sehr robust.
Schnelle Lieferung und wie beschrieben alles top. Wir sind sehr zufrieden.
Die Montage war auch super leich
Fits my Reolink 4k RLC-810A on holes setting 3. Strong product with good water resistance.
Reasonable price, compared to Reolink offerings. Highly recommended.
Good boxes and cheaper than most, will use them again.
I installed 4 of these boxes very easily on 4 of may Reolink RLC-81A cameras. I read some comments with other customers who had issues to find the correct pattern to install the cameras. If one of the vertices of the triangle is set on the hole marked as “3” the other two meet the corresponding matches. Actually, there are other combinations as well that fit exactly for these cameras. So, no issue at all at least for me with these cameras.
Solid junction box and was neat once installed. I adapted my reolink plates to match holes quite easily and its a good match in diameter & style for their dome range. Recommended.
Cercavo un prodotto come questo per contenere i cavi di collegamento delle mie telecamere.
Mi sono imbattuto in questo e dopo qualche domanda e ricerca ne ho comprato uno per vedere se potesse fare al mio caso.
PERFETTO!!
Ottima fattura, alluminio molto ben fatto con i particolari davvero curati
fornito di tasselli e viti della giusta misura per fissare la telecamera.
foro anteriore per il passaggio dei cavi della telecamera e foro posteriore per il passaggio dei cavi che arrivano dal muro con il corrugato.
ci sono anche passaggi di cavi sulla parte laterale per chi ha il cavo esterno.
davvero un prodotto di altissima qualit e che si adatta a molti modelli di videocamera
io ci installer delle reolink RLC-810A ed i fori sono perfetti per il suo collegamento.
fori che non sono passanti in modo da impedire all’acqua di entrare e le viti fornite per i pre fori sono davvero una chicca!
consigliato per l’ottima qualit ed il prezzo che vale assolutamente la bont del prodotto!!
These boxes matched our Lorex cameras perfectly and added extra space so the camera angle didn’t capture the soffit of the house. Super easy to attach and install!
La scatola risultata molto robusta e ben fatta. Montata con telecamere Reolink ha un buon impatto visivo (vedi foto, sono stati necessari fori supplementari fatti con trapano). Spedizione con prime sempre puntuale.
I bought these to mount 3 Reolink RLC 410 cameras. They are sturdy metal boxes with well thought through weather sealing. Much better than using a generic plastic junction box next to the camera.
One of the other reviews said they needed to modify a Reolink camera to fit, but mine fit just fine without modification. There are lots of different sets of tapped holes in the lid for different cameras, all numbered. My Reolink 410s fit perfectly using the set numbered 6.
Sind kompatibel mit meinen ABUS TVIP60000 Kameras. Gehuse sind hochwertig gebaut, Schrauben und Dbel sind soweit alle dabei! Bin zufrieden.
Love it as it keeps wires safe and secure
Easy to install with screws included
And excellent sturdy tough quality
Item came in next day, and was up within a few hours. Installation process was straight to the point and fairly easy, the hardest part is figuring out where you want it. Would buy again anyday.
Ich finde das die Dosen sehr gut sind, haben viele Mglichkeiten fr verschiedene Kamera Hersteller.
AluGussgehuser sind wetterbestndig und sehr Langlebig.
Ich wrde die weiter empfehlen und selbstverstndlich selber immer wieder kaufen.
Does what it says.
Well made and enought room.inside for cctv wires
Universal mounting holes. Easy to use. Attractive when installed. All around an easy to use and solid product.
Do whats intended, very easy to use, well made too.
Kamera sitzt perfekt drauf es gibt endlich keine kabeln mehr zu sehen !!!
Although this is not designed to be used with a Reolink dome camera, I bought it with the intention of adapting my cameras back plate to fit it.
To do this is relatively easy if you are handy. I adapted the back plate of my camera to fit hole set 5 on this metal box.
If you have a Reolink dome camera, this is the only position to use as this prevents the screwheads from stopping the camera attaching to the plastic base.
Given that the custom back box for the Reolink dome camera is currently out of stock in the UK, is wider than the camera base (ugly IMHO) and almost three times the cost of this box, this is the perfect solution.
Molto pratico da installare veloce e si pu installare su qualsiasi telecamera spedizione molto veloce installato 4 telecamere e funziona molto bene
Very happy with this weather proof box. It is sturdy, was provided with all the hardware I needed as well as an extra set of hardware. Has a rubber seal between the cap and box. My camera base was able to be mounted to cap without any issues. Only gripe was there were 4 o-rings included per unit and no instruction as to were to use them. I used them for the cap screws but in hindsight those are sealed and they most likely are used for camera vase mounting. Very happy and recommend.
I loved that they are well made and easy to install 3/4 conduit. I dislike having to drill 1/2 hole for 1/2 conduit since only 1or 2 cat5 cables going in.
Worked with my Reolink RLC-410 cameras. Getting the screw holes to line up took a minute.
It comes with weather seal in the back that helps to seal it to tge wall pretty nicely.
The product is great for the intended purposes. It is a less expensive alternative for sure.
The only issue I had is that the holes for the camera screws are not deep enough. The screw would often bottom out before tightly securing the camera. I was able to overcome this with adding washers, but could easily be corrected.
Very high quality. Very easy to install with good materials. Must buy