Duronic Monitor Arm Stand DM653 | Triple Gas-Powered PC Desk Mount | BLACK | Height Adjustable | For Three 15-27 LED LCD Screens | VESA 75/100 | 5kg Capacity | Tilt -90°/+85°,Swivel 180°,Rotate 360°
Duronic Triple Gas-Powered Monitor Desk Mount DM653 [SILVER/BLACK]
The DM653 is a heavy-duty double desk mount that holds three computer screens. This model is part of our DM65 range which is made with aluminium and steel, and is covered with a silver and black finish. One of our most premium ranges, these desk mounts offer an impressive range of manoeuvrability compared to the rest.
The DM65 range feature gas-powered arms that can move vertically on-the-fly; simply hold the screen gently and glide it to the position you need it in, then release. It’s that simple! This model has two arms with three joints that can swivel 180°, and a third smaller arm in the centre which holds the third screen close to the pole.
This screen arm is fully height adjustable, has swivel and tilt ability and can rotate the screen from horizontal to vertical.
It comes with a standard-sized Duronic clamp that will fit desks between 5mm – 68mm depth, and the arm can convert to be installed onto a desk via a hole using a grommet (available separately). As well as allowing you to achieve an ergonomic set up for your workspace, this monitor stand will elevate the screens off of the desk surface, which will free up space that you can utilise for other equipment and accessories.
.
Easy Installation
Setting this screen mount up on your desk couldn’t be simpler to do. The clamp slides onto the back of the desk and is tightened with the bolt until it stands securely. Then the arm can be adjusted by using the locking collar on the pole to secure it in the optimal position. Fixing a screen onto the stand is a simple procedure because the heads all accept the VESA 75/100 standard which make them suitable for all PC monitors and the majority of TV screens too. Installation is quick and the only tools you will need is a Phillips screwdriver and an Allen key (provided).
| | | | |
|---|---|---|---|
DM653 DimensionsThe DM653 pole is 40cm high and the extended arms are both 55cm long. This mount can accommodate three screens sized between 15-27 inches and weighing no more than 5kg each. The VESA brackets will hold monitors with VESA 100 or VESA 75 mounting holes. | Swivel & Tilt AbilityThe two longer arms have four joints that can swivel 180° side-to-side. This allows you to articulate both arms individually in different positions to suit your set-up. The VESA brackets have a tilt ability of -90°/+85° which allows the viewer to make small adjustments to the screen’s angle to align with their line of sight. | Weight Capacity & Rotation AbilityThanks to the fully rotational VESA head brackets, the screens can rotate a full 360°, allowing for both horizontal and vertical use of the screens. The arm can be re-positioned in any direction on the pole by twisting the locking collar on the pole. | Adjustable Clamp SizeFitted with a standard Duronic clamp, this allows easy and simple installation onto any desk edge that is between 0.5cm – 6.8cm. Made of strong robust steel, you can rest assured that your monitor/s will be held securely in place. Compatible grommet: DM-GR-02 |
HOW A DURONIC DESK MOUNT WILL TRANSFORM YOUR WORKSPACE
| | | | |
|---|---|---|---|
| | | | |
WHY USE A DESK MOUNT?
Ergonomic care has become more of a focus over recent years due to the fast-evolving workforce; with more and more technology being introduced in the workplace, physical activity has declined and it is affecting more people’s health than ever before. A side-effect from this is that employers witness more illness-related absences that could have been avoided if their employees were more active and had a better ergonomic set-up in their working environment. Studies have shown that sitting at a desk with poor posture for long periods of time can affect your health, especially if you already have a pre-existing medical condition.
A major contributor to poor posture is the position of the computer screen. This is because the computer screen is what determines our overall posture; it’s the place our eyes rest upon and where we naturally turn our body towards in an attempt to sit comfortably. If the screen is badly positioned for the user (i.e. too high or low) then they end up craning their head and/or neck to view the screen better, which in turn affects their spine and shoulders. Over time sitting like this can cause pain, discomfort and long-term health problems. It can also put unnecessary strain on the eyes, which can ultimately have a knock-on effect on your well-being, energy and productivity. Ensuring your monitor/s are at the right level can help to reduce orthopaedic/back pain that can occur from poorly positioned monitor screens, as well as ensuring you can work as productively as possible.
Duronic desk mounts are the perfect solution to improve these problems and to create a more organised feel to your set up. In addition to this, elevating your screen off of the desk up onto a stand frees up valuable desktop space. No matter what screen/s you have, what kind of desk you have, we will have a desk mount to suit. Once you have your screen/s elevated to the optimal level you are sure to see and feel a vast improvement. Best of all, our mounts are second to none in quality; made of strong durable materials and designed to meet the user’s needs perfectly, you will not be disappointed. In fact, you’ll wonder why you didn’t have one sooner!
| Weight: | 6.4 g |
| Dimensions: | 57 x 46.5 x 14 cm; 6.4 Grams |
| Brand: | Duronic |
| Model: | DM653 |
| Colour: | Dm653 Tripple |
| Batteries Included: | No |
| Manufacture: | Duronic |
| Colour: | Dm653 Tripple |
Initially I was a bit skeptical if this product was for me before buying as my center monitor was peferectly in the corner before but decided to try it anyway.
My skepticism was for 3 reasons . 1) I have a corner desk . 2) desk is against the wall and the corner part is solid in that area so can’t put the clamp there 3) my monitors are 24 inch.
The dm653 comes with 3 gas spring arms and was pleasantly surprised to find an optional bracket to mount the centre monitor directly to the pole . In the end I opted to use the direct mount that was included in the box otherwise given the depth of my desk it would be too close to my face and the other two wouldn’t line up how I need them to but I may use the the third arm in the future if I get a bigger desk. – was worth the extra 20 pounds comapred to the dm5xx with only two gas arms to have the option to play with.
Becuase the monitors are 24 inch I needed to bend the arms back to shorten the length in order to have the screens sit flush side by side which was a bit of a concern at first becuase my desk is against the wall and I didn’t like the idea of moving my desk forward to allow for the bend back. Luckily I have a windowsill behind my desk so after a bit of jigging I was able to use the clearance of the windowsill to make it fit. It did take a bit of jigging and head scratching to get my monitors in a comfortable position because I couldn’t mount in or near the corner but with the range given from the arms I am now really happy with my set up .
In typical male fashion I didn’t use the instructions to assemble except for adjusting the gas spring part. I found it quite self explanatory so that was Good.
It was clear to me that this would work best with 27 inch monitors if I didn’t have the clearance of the windowsill becuase of the full length of the arms . Meaning I wouldn’t have had to bend them back in order to have them sit nicely flush together and iwouldnt have to move my desk forward if the clearance wasn’t there behind my desk .
Would reccomed having a sturdy solid wood desk due to the stress of the weight this must put on the desk .
All in all it took a bit of time and fine tuning to meet my requirements but really pleased with the end result and flexibility I now have . Gas spring arms stay where I set them after fine tuning the tension and arms have stayed in the same position since I set it all up 3 days ago . ( haven’t come back to find the gas arms have moved the monitors upwards or downwardsand no floppyness.
My only dislike is that if I move one arm I have to hold the other to prevent it from moving with it. I have tightened the centre bit that goes on the pole but it still moves slightly if I don’t hold one arm when adjusting the others position . Reccomend getting everything in position before tightening each of the arm parts.
One final thing to add , the direct pole mount has a bit of a length protruding from it rather than just a flat mount directly against the pole ( around 2-3cm at a guess ) so I could twist this around and make the centre monitor more central to the corner of the desk with the extra few centimetre extension off the pole . All in all good product just have a think about preferred positioning before buying but I’m sure you can make it fit to you requirements one way or another. It has certainly created more space for me to work at my desk.
Hope this helps , cheers.
Overall, I’m very happy with my purchase. My workspace has been transformed. I have room for my piano keyboards and Ableton Push 2 now. It’s really nice to have everything hooked up. I had 2 monitors before, and it’s really nice having the 3rd one properly mounted.
I connected a Asus VG279 27″, Asus VS278 27″, and a Dell older, heavier monitor. No issues with the stand carrying the capacity. The Asus monitors are within Duronic’s weight rating. The Dell monitor might be over.
Unless your desk is really deep or you want to mount something other than a monitor, then, you’re probably not going to use the middle arm.
Complaints:
Arrived 4 days late from the UK to the US. Duronic responded to let me know it was running behind, but it took several days to get a response. The arms arrived dirty (see pictures), and there was some very minor metal burring at the small allen key area where the base mounts to the desk. However, in the end, I’m very happy, and I decided to give 4 stars.
Trs bon article, qui semble de trs bonne facture.
Le montage n’est pas trs difficile. Comme dit par d’autre, le pied semble fragile jusqu’ la fin du montage, mais une fois les crans plac, il n’y parait plus.
Le pied est fourni avec deux montage diffrents possible pour l’cran centrale, avec ou sans bras. Selon la profondeur de votre bureau, vous pourrez choisir l’un ou l’autre (sans le bras sur la photo).
Petit bmol, je n’ai pas russi descendre plus les crans extrieurs. Il y a bien une vis qui permet de les baisser d’environ 5-7cm, mais il y a une bute qui m’empche de les baisser plus.
Quoiqu’il en soit, bon produit, voir sur la dure maintena
Hlt wunderbar! Die Arme lassen sich auch variieren, indem man die Teilstcke verteilen kann wie man mchte. Gasdruckfedern lassen sich auf die entsprechende strke verstellen.
Top!
To be honest assembly was a bit of a pain but once setup they work so well, I have 3 24″ monitors and they fit very well with this
Outstanding customer service from Amy! If I ever need something like a monitor stand again, I will happily buy from Duronic!
Used to hold 3×24 inch monitors.
Only bad point is the tilt of the monitor function – you need to occasionally tighten the hex screw as it will flop forward slightly if you tilt the screen towards you. Not all the time, need to adjust every 1-2 weeks.
I really like this mount, its very strong and is exactly what I wanted. Having the ability to extend the center monitor was a game changer.
One issue- the plastic decorative caps seem like crap. Would have been much nicer had they been aluminum or steel. Probably much stronger as well.
Missing parts- I was missing three screws which are used to secure the arms and center pole in a fixed position, rather than being able to free turn. I spoke with amazon and they were unable to just ask the seller to ship these fixation screws, or whatever you call them. Rather annoyed by this. Ended up having to make a trip to the local hardware store where I found some of the missing screws, had to cut them to size but in the end they worked.
The Instructions contains references to Installing Product A, or Product B, but I didn’t see anything references to A or B when I ordered ??
I had an issue with the under-desk clamp which didn’t quite fit my (wooden) desk, which has a 2″ x 3/4″ edging strip on all sides, so I had to chisel-out a notch in the back of edging strip so that the clamp’s screw-up-plate could actually screw-up against the underside of my desk, but once that was done, the clamp & pole is quite secure on the desk
I have 3x 27″ monitors, and I have them in Portrait, so I didn’t need some of the extension arms
I guess if I wanted them in Landscape, I would need to fit all the arms
I started by clamping the center monitor’s bracket directly onto the pole without using an arm
I then added the outside monitors, using only one arm/bracket each
Adjusting the arms is a 2-person job, as I had to push/hold the outside monitors at the same level as the center monitor while I adjusted the tensioning nuts with an Allen-key
There’s nothing to tell you when the tension is correct – you let go the monitors and they either pop-up, or droop-down
Lots of trial & error, as the tension adjustment is simply labeled as + or –
Although there is some cable-management, my chunky DisplayPort cables didn’t fit, and I had to use Velcro cable ties to attach the cables to the arms & the pole, but none of that is visible (from the front)
Overall, though, I wish I’d done it earlier – it’s saved desk space due to not having the monitor stands anymore, also as I have it mounted on a corner of my desk, the 2 outside monitors are outside the desk and outside of where they could be if I had still used the monitor stands
Also im Grunde sehr zufrieden. Der Halter ist sehr massiv, am Anfang war ich etwas besorgt, ob er wirklich 3 Monitore 5,7 Kg hlt… Das tut er.
Leider ist aber nach 4 Tagen mein Schreibtisch verabschiedet – danke an Ikea.
Ich behalte die Halterung trotzdem, denn mein Tisch ist gebrochen und nicht die Halterung
Fazit: Nur kaufen, wenn ihr eine Massivholzolatte habt oder die stelle vorher verstrkt.
Der Schaden ist 15x40mm gro. Einfach vorher verstrken, dann sollte es halten.
Je l’ai reu Vendredi, le produit l’air vraiment qualitatif, bien que le montage n’est pas des plus simple pour une raison:
Assez mal expliqu, pour ma part le soucis a t de comprendre comment les bras qui se lve et qui se baisse fonctionnent. En fait, il faut poser les crans puis les baisser tout en jouant avec la “visse” qui gre la pression.
Je n’ai mit que 1 bras par ct pour viter que cela soit trop haut et trop loign. Cela passe trs bien mes 3×24″ en VESA 100.
J’ai eu peur au dbut car le produit sembler pas tenir mes crans, mais aprs les avoir mit puis visser fond, a ne bouge pas du tout.
Donc je met 5toiles en notes gnral, 4 en montage et 4 facile installer
Livraison vraiment rapide par AMAZON, PREMIER livreur qui monte chez moi pour me dposer le colis et vendeur srieux..
THANKS amazon !
Very good once its put together but the assembly was a little tricky in places especially with the gas struts on the arms
The table surface saved (monitors fly “in the air”) is priceless!
The product itself is good. Sturdy, big enough. However, be advised that the final stiffness depends on the weakest link, and that can be your table.
Hanging 3x 27-inch screens on a single point on my table bends it quite a bit. If I touch the screen, the table vibrates threateningly. So, be prepared that you need to start with a really thick table.
If I knew that, I would go for two or 3 single-arms instead.
Still, the table surface saved (monitors fly “in the air”) is priceless well worth a try.
Les produits cette marque sont de qualit et robustes, avec un bel aspect final.
La notice, en schmas tape par tape avec de brefs commentaires en anglais, est claire et complte.
Les verrins gaz sont vraiment trs pratiques pour un poste de travail assis-debout. Leur tension est rglable par vissage au millimtre pour adapter la maniabilit au poids de l’objet voulu. Complt par un support d’ordi portable de la mme marque et d’un support pour smartphone bidouill (fix sur la plaque vesa), tout reste en place : grce aux rglages prcis, objets lourds ou lgers ne s’affaissent pas ou ne remontent pas intempestivement, tout en restant assez maniables.
es un producto muy robusto y mantiene los monitores perfectamente. la nica incidencia es que en los 2 soportes de abajo, si los pones en lnea, se hace complicado apretar los tornillos para dejarlos fijos, pero por lo dems es perfecto.
I can honestly say that I have never seen such clever little ideas on cable management. The arms hold in place no issues with any height movement or falling. Very sturdy. Would and have recommended to friends.
Trs bon produit. Solide mme si pendant qu’on le monte on ne pourrait pas le dire mais une fois que tout est en place et resserr a ne bouge plus.
Sturdy desktop mount. Easy to assemble and holds 3 27″ monitors with ease. The gas powered arms make adjusting the monitor heights simple and each monitor can be angled/tilted/rotated to suit your needs. Great product.
Ich habe den Pole gegen einen lngeren getauscht.
Aufbau etwas schwierig. Stnder kommt etwas wackelig rber. Aber dennoch hlt er die Monitore ohne Probleme. Die Anleitung knnte etwas genauer sein und zum Beispiel auch richtig beschreiben wie die Gas Federn richtig einzustellen sind
Excellent product. But I would suggest it has more clear instructions. We did install it by looking at the video from youtube
Super bras pour trois crans, un cble management prsent bien qu’il soit possible de l’amliorer ( pensez prvoir des cbles d’environ 3 mtres est assez souple pour ne pas oppos de rsistance au pivot des bras . Superbe finition. Dommage que l’cran centrale quand le montage choisi et celui avec le vrin manque un peu d’axes de pivot ce qui ncessite un bureau d’au moins 90cm de profondeur.
Parfait. Tout est facilement rglable et Il est possible de tout serrer avec les cls fournies.
Really great product. Simple to use and looks great. Was really simple to assemble and every screw you should need is included. It even includes strip ties for cable management.
Totalmente fuori prezzo, davvero. Con gli stessi soldi ne potevo comprare 4 di altre marche, ho scelto questo solo perch ero sicuro che i pistoni a gas sarebbero stati di qualit. Inoltre in fase di produzione deve essere stato maneggiato sbadatamente, quasi tutti i pezzi avevano ammaccature varie
This is a Christmas gift. Not setup yet, however, the quality appears A1. Hopefully it will work well. Overall I scored it something just on its look and weight.
Il prodotto resistente, ho montato un monitor centrale da 27″ e due laterali da 21″. Nonostante avessi i monitor da 21″ senza fori VESA, ho comprato degli adattatori esterni e si adattato completamente al prodotto.
Great bit of kit, 28″ in the middle, widescreen gaming on the left and a 24″ on the right all fits well, I had my fingers crossed. Don’t take this as a recommendation to use a 28″ but it worked on mine.
So I unpacked this and set it up. Easy to install pole, easy to install arms. Got all the monitors on and mounted. Adjusting the gas powered arms was just… a thing of beauty. It’s exactly as I had hoped and expected it to be.
When I was finished I had a few extra parts. It appeared I could remove the center arm and replace it with a fixed monitor plate (like the majority that you find out there) its funny because I thought to myself — if the center arm dropped too much/or was too close to my face – then I’d be very much unsatisfied, not only did the gas arm have no problem holding it up at the angle I needed – there was a plan b already thought of by the manufacturer
Cable management was great. The plastic clips for the bottom were ok, but not fantastic (I care more about functionality)
I use this for working at home – and have gained a ton of room on my desk. I added a laptop, USB dock, kvm switch, and speakers – and I still have room to spare.
This mount is easily worth $350 or more. If your thinking about purchasing one – and have a deep desk where you want the monitors closer to you – this is a gold winner
(I never post reviews but I’m hoping this helps someone else, as I wasted $99 on the wrong one originally)
Absolutely brilliant, can configure any which way you want, spring/gas arms are awesome (my last one was not spring/gas and were a pain to adjust up and down) holds my 3 monitors fine, easy to adjust heights etc, Just a heads up though, make sure what you are mouting it to is very strong and sturdy, with my desk and all the forward weight, tiltlted down slightly so I had to put some props under it to make sure that it diod not tilt and sat firmly on the desk overall. Not a fault of the product and they do say on the website the mount you use preferably should be solid.
Hope this helps…
Update: Der Tisch ist wie auf den Bildern zu sehen ist, dann leider doch irgendwann eingebrochen. Um alles wieder stabil zu verbauen habe ich eine Holzplatte oben und unten eingefgt, die den Druck nun gleichmig verteilt.
UPDATE 04.02.2021:
Mittlerweile habe ich einen anderen Tisch (Hartholz von IKEA) und 3x LG 32GK850F 80 cm (32″) im Einsatz.
Die Duronic Halterung funktioniert weiterhin einwandfrei.
Ottimo prodotto, molto robusto e completo di tutto. Sostiene senza problemi 3 monitor (uno da 22 e due da 17).
Klasse Teil, ich benutze es an einem FLUSI. Alles lsst sich super einstellen. Stabil, wackelt nichts. Die Anleitung lsst etwas zu wnschen brig.
I bought this 3 arm stand in Feb 15 for use of 2 monitors and using the 3rd arm as a keyboard stand. I had a back condition which meant that sitting down was painful post operation and I also liked the idea of a sit stand desk — but they were simply impractical and expensive. So I decided that if I bought this with the gas lift arms, I could easily change from when position to the next — sitting to standing in a matter of about 15 seconds! It worked like a dream for just under 2 years then I recently changed my system and instead of having the usual PC tower and dual monitor setup, I ended up with an all in one PC from Lenovo and a 2nd monitor connected by HDMI. This was when I started to have problems
The main monitor (now the all in one PC) started to nod downwards, looking like a depressed donkey towards the desk. It wasn’t the gas arm which was dropping, it was the VESA mount on the back which has movement of about 130 degrees of tilt, up and down (rough guess here!). No matter how much I tighten the bolts, it kept doing it. So I called Duronic support and got right through a very helpful guy called Sam. It took me a while to explain what the problem was and once I had managed to put the issue into a way that made sense (these stands move in SO many different ways that I struggled to describe the problem over the phone!), but once we were on the “same page” and I explained that no matter how much I tightened the bolt it wouldn’t go tight enough, he diagnosed that I had tightened it SO much (I had used a power screw drill/driver!) that I had misshapen the socket — so, he simply popped me a whole new VESA mount in the post which arrived next day — this was done FREE OF CHARGE despite the fact it was my fault.
So I fitted that and no joy — nodding monitor again. So back on the phone to Sam and I ran though the weights and which point he said that the stand weight limit per arm was 8kg — my new all in one PC is 11.8kg! So, this is why it was now nodding down — the old monitor was about 4KG, but I had simply attached a device which the stand wasn’t built for.
I explained my setup and he promised to go away and have a think and see what he could do. 3 days later, a new part turned up in the post (again I was NOT charged for this!) AND IT WORKED! It’s apparently a mount from a cheaper stand, but as it doesn’t have the tilt and pan features of the original, it didn’t nod down!
Now I am a fussy customer at the best of times, but I cannot fault Duronic and Sam in anyway — he was absolutely incredible and helped a customer through a problem I had caused myself.
So to put it simply, you cannot go wrong buying a Duronic product — they REALLY CARE about their customers and I have already recommended them to a friend who has just bought exactly the same 3 arm gas lift stand as me. As I work in the IT industry, I don’t even think he knows the goodwill and trust he has built and I will recommend them to everyone I know!
Thanks Duronic and especially Sam — you are legends!
Trs bon produit, j’ai 2 crans de 27 pouces en bas et j’attends mon troisime (27″ aussi) pour le mettre au dessus.
Ottimo meccanismo a gas, per il montaggio dei monitor 27 va bene ma un poco al limite e diventa pi complesso poterli mettere ad angolo tra di loro
Ich habe diese Halterung nun schon ein paar Wochen im Einsatz und bin mehr als zufrieden. Arbeite mit drei ASUS-27-Zoll Bildschirmen. Man kann die Bildschirmposition schnell und exakt ndern.
Was fr mich einer der positivsten Effekte war, ist der Platz den ich nun zustzlich gewonnen habe. Man kann sehr viel unter die Bildschirme stellen, da ja kein Standfuss mehr bentigt wird.
Einen der drei Monitore nutze ich auch zum Videos ansehen und dreh diesen einfach in Richtung Couch, das war vorher nicht so einfach.
Mit den mitgelieferten Verlngerungs-Armen kann man die Monitore so anordnen wie es einem am besten passt. Es sind auch drei Arme mit dabei, die man in der Hhe verstellen kann.
Ich wrde diese Halterung wieder kaufen, auf alle Flle!
Duronic DM653 ist die erste Tisch-Monitorhalterung die ich mir zu gelegt habe und hat mich schon gleich beim Auspacken berzeugt, das es die richtige Wahl war. Alles Ordentlich verpackt, Werkzeug war auch alles da, Einzelteile sahen schon auf dem ersten Blick sehr stabil aus und der Aufbau war ganz einfach so das ich nicht mal die Anleitung bentigte.
Ich habe 3 x 27″ Monitore dran. Ich kann nur empfehlen, es zu zweit auf zu bauen (Halterung + Monitor Befestigung), ist einfacher. Auch die Ausrichtung hhe winkel etc sollte man dann zu zweit machen.
Negatives gibts so direkt nichts. Vielleicht knnte man die kleinen Schrauben ansprechen die beim Festziehen schnell berdrehen und der Kopf beschdigt wird. Da wrde ich mir wnschen, das es dort von jeder Schrauben Sorte min. 1 Ersatzteil mit dabei ist um halt dieses schnell mal zu wechseln. (Eigentlich deswegen einen halben Stern Abzug dafr, aber sowas gibt es hier ja nicht daher volle Sternpunkte)
Wer eine Tisch-Monitorhalterung sucht, ist mit dieser hier sehr gut beraten.
Ich persoenlich fokusiere mich am PC am meisten mit Software Engineering und Gaming, dies hat zur folge, das ich Monitore oft hin und her schiebe. Nach langer suche einer stabilen und beweglichen Halterung habe ich mich fuer dieses Geraet entschieden.
Die Gasbetriebene Hydraulik macht die Bewegung der Monitore sehr angenehm und erlaubt auch bei 24 Zoll Monitoren (in meinem Fall) einen weiteren Monitore unter die Halterung zu stellen, was ein 6-Monitor-Setup ermoeglicht.
Auch das Kabelmanagment ist in den Streben integriert und Kabelsalate mit Multi-Monitor-Setups gehoren der Vergangenheit an.
Einzig allein der erste Aufbau ist etwas Zeitintensiv, was jedoch auch an mir persoenlich liegen kann.
Alles in allen ein sehr guter Kauf und daher 5 Sterne von mir und definitiv eine Weiterempfehlung.
This is a great product, and holds the 3 24″ monitors I have very well.
I have to reiterate what other people have said about the up/down tilt adjustment bolt on each arm. The heavier the monitor, the tighter you have to make the bolt. To support my 24″ monitors the bolt is very very tight. If I tilt the monitors more than a few times it starts to sag, and I have to re-tighten the bold again.
Another caveat is when you adjust or move one of the monitors, due to the weight on all the arms, the whole supported weight can move about. This makes it difficult to set-up the monitors in perfect alignment. The supporting bars also sag slightly when there is weight on them. They are in no way in danger of breaking, it just takes away from the overall look of the product.
And finally, one suggestion I would have for Duronic. The bolts used for the caps that are used to cover the arm joints could be better designed to fully tighten each joint. This would prevent the sag in the arm joins I was talking about earlier.
Overall I am very happy with this product and would buy again due to its multiple configurations ability an sturdiness.
Una calidad de acabado inmejorable, pero recordar que vuestros monitores tengan sistema vesa para poderlos colgar, a mi me toco hacer los agujeros pero aun as quedo perfecto.
This thing is great. I’ve got the 3 arm one, and I’ve mounted it on top of my desk with 3 24″ monitors.
It was easy to adjust and I got my monitors to the correct height and orientation easily. The product itself is obviously very well made.
I was worried that having 3 different monitors on the one stand would cause some wobble or tilt, but I needn’t have — they’re just as stable and straight as when they were on 3 separate stands, and moving them around (once tightened with the supplied allen key) is easy.
I’m very pleased with the result, and would definitely recommend.
I’m very impressed with its quality, it’s as good as they say it is. It’s heavy and feels strong so I don’t worry about it breaking or falling.
I was a little worried, initially, about if it would be possible to achieve the position I wanted but it’s absolutely brilliant. I’ve got all 3 monitors in a row, higher than my chair, titled downwards so I can lay back and look at the screens without hurting my neck. The monitors stay in place and don’t “fall” so far (admittedly, I only have it a week). The left and right monitors are a bit rotated too, to achieve a “seamless” experience.
The setup troubled me a bit, even though the instructions were exact and clear. The problem was that it took me a while to figure out the “gas powered” arm and how to make it stay where I wanted it to. It has a screw on the lower end that you have to turn to adjust it depending on how much weight it has to hold. My LCD monitors are very light so I had to turn it 4-5 full circles before it would stay where I wanted. Before that, it would lift the monitor up.
I’m 100% satisfied so far (one week of use).
Superb service. Quality product and arrived within 48 hours. what more can I say?.
This product is amazing, I was so happy when I assembled it on my desk, it’s exactly what I expected and it looks brilliant, very high quality and very strong steel arms!
Seems right for the price. I’m using 3 x 22″ Iiyama XU2290HS-B1.
When you open the box and realise it’s self-assembly, it does initially look quite daunting but it’s actually not – assembly took about 15 minutes, excluding the time it took to remove the stands that came with the monitors.
It comes with the mounting screws, and the necessary allen keys to adjust the tension. Mine are all adjusted now, and I love it. I’m an FSX/Cubase 8/Visual Studio user, so 3 really is the magic number when it comes to screens.The product is easy to adjust, feels very sturdy and the joints are smooth. The desk clamp is solid and won’t mark, and the screens do not wobble around when I type.
Da ich mir fr Audio Arbeiten und Gaming, 3 Eizo Foris Monitore zugelegt habe, aber am Tisch nicht den ntigen Platz habe, suchte ich nach einer 3 fach 24″ Monitor Halterung wo ich:
1. jeden Monitor frei bewegen und drehen kann wie ich will
2. die Hhenverstellbar ist
3. und auch das Gewicht der Monitore aushlt bzw. alles einstellbar ist damit die Halterungsarme nicht absinken, diese aber trotzdem noch leicht bewegbar bleiben.
Kurz Gesagt ich fand meine Lsung beim gasbetriebenen Duronic DM653!
dazu ist die Verarbeitung super und stabil, und sieht auch sehr wertig aus.
Das zusammenbauen ist einfach und idiotensicher. (5 Sterne)
+1 extra Stern fr den Support (wenn ich 6 Sterne verteilen knnte, htte ich sie vergeben):
Problem: Fr mein Monitor/Tisch Setup war der mittlere Arm viel zu lange, (was ich beim abmessen des Tisches irgendwie bersehen hatte)
das hatte aber eine sehr kurze Distanz von den Monitoren zur Tastatur zur folge.
Ich habe dem Verkufer einfach mein Problem beschrieben und dieser schickte mir gleich eine email mit einem Bild,
von einer krzen Halterung fr den mittleren Monitor.
Nach kurzer Besttigung meinerseits das das die perfekte Lsung ist, wurde mir vllig unkompliziert diese krze Version gratis zugeschickt.
Ich wrde mir von mehr Firmen so einen guten Kunden Service wnschen!
.