HUANUO Dual Monitor Stand – Height Adjustable Gas Spring Double Arm Monitor Mount Desk Stand Fits Two 17 to 32 inch Screens with Clamp, Grommet Mounting Base, Each Arm Holds up to 9kg
2 Mounting Methods
This dual monitor stand supports 2 mounting methods. Grommet base fits desktop with thickness up to 3.93″ and the diameter of hole from 0.4″ to 1.96″. C-clamp works with desk thickness from 0.63″ to 2.95″
Sturdy & Adjustable Dual Monitor arm
This dual monitor stand is composed of high-grade aluminum die-casting and alloy frame. It’s more durable and stronger.
Once you adjust the gas spring tension according to the weight of your monitor, you can adjust your monitor height by 1 action
Integrated Cable Management
The clips on the dual monitor arm can effectively manage your cables and route them down the arm and behind the desk , solving your cable clutter and keeping a tidy and clean workstation.
Weight: | 5.93 kg |
Size: | / |
Dimensions: | 530.35 x 246.89 x 216.1 cm; 5.93 Kilograms |
Brand: | HUANUO |
Colour: | Black |
Pack Quantity: | 1 |
Manufacture: | HUANUO |
Colour: | Black |
Dimensions: | 530.35 x 246.89 x 216.1 cm; 5.93 Kilograms |
Quantity: | 1 |
Size: | / |
I was looking for a monitor arm that allows me to move my drawing tablet in any way I would want to, while also having my main monitor mounted on the other arm.
I felt like there was no point of spending 3-4 times more on an ergotron arm for essentially almost the same level of articulation.
Assembly was quick and easy, and being able to route the cables inside the arm was a bonus.
It feels sturdy enough and you can always loosen/tighten the joints if you need to.
Overall I am really happy with my purchase and I would highly recommend it to anyone who’s looking for a versatile monitor arm for a good price.
Great support for two 32 inch curved screens, both line up and close together in center.
(Acer Nitro EI322QURPbmiippx 32 inch Quad HD Curved Gaming Monitor (VA Panel, FreeSync Premium Pro, 165Hz, 1ms, HDR 400, DP, HDMI, Black) )
J’ai jet mon dvolu sur ce support car j’en avait marre de ne plus avoir de place sur mon bureau.
Je voulais mettre un dispo verticale avec mes 2 crans l’un au dessus de l’autre.
Le montage se fait vraiment simplement, le plus long c’est le rangement de cble aprs.
Mes 2 crans sont de 27 pouces pour celui du bas et 24 pour celui du haut.
Le support est ok pour ces 2 mais si la tour penche un peu mais j’ai prfr faire un dport de 1 pour viter un trop gros poids sur une zone de mon bureau (je l’ai rapproch du pieds de mon bureau) et de 2 pour l’espace rduit l’arrire de mes crans. Au final a rend mme plutt bien!
Il y a des passe cble dessus qui permettent de bien tout ranger.
J’ai choisis ce support pour sa flexibilit. Si un jour je veux remettre mes crans en horizontal, je peux le faire.
Voil voil!
Si mon commentaire est utile n’hsitez pas le “liker”! Merci merci!
This stand does a great jobs of holding both of my monitors up and level. If you’re desk is against a wall you’ll need to move the desk a bit forward so you can clamp or drill the stand. It even has cable management so you can route the cables on the stand to make your setup look clean.
Holds double monitors solidly. Good range of movement. Very little movement when gaming. Does the job well.
Used this to mount my Dell G3223Q, with a second monitor arm mounting a camera to my desk. I could set it up without instruction and everything was packaged nicely.
The build quality is satisfactory and it holds up said Dell 32in monitor perfectly, albeit the tilt is a little TOO loose – if I tilt the monitor a touch then it’ll sag. This would NOT be an issue if I could adjust the tilt tension, but there doesn’t seem to be a way for me to do so (No Allen key screws on that part).
However, for the price (compared to the costly Ergotron products) it’s done exactly what I needed – support and hold a large, 32in monitor while allowing me to adjust it’s position WITHOUT costing a ridiculous amount.
The mounts arrived on time and were well packaged. Very easy to assemble and fitted to well to sit/stand desk. Only negative comment would be that the desk need to be moved away from wall further than usual, due to range of motion at the back. Not a big issue but worth keeping in mind if space is an issue for you.
2x 24″ monitors, they need some tweaking to set up but are great once set up
Solid mount but you do need a good desk to mount it on. I had to wind the tension down a lot as my monitors are at the light end of the scale.
These are easy to put together.
Holds the monitor in place and angle that you want.
It just takes a little bit of playing around to get the arms set with the right pressure.
The only negative bit is that they need some space behind them to allow the monitors to line up perfectly and not be to close to the use
Really sturdy product, instructions were a little overly complicated but once you figure it out it’s really easy to put together. Overall, a good price for a quality product.
Love this product. Really good adjustable and I also gain a ton of desk space.
Cercavo qualcosa che mi permettesse di modificare la posizione degli schermi (entrambi da 27) per ogni situazione l’ho trovata!
Il montaggio non proprio spiegato bene ma con un po’ di logica ci si arriva
Il sistema presenta inoltre degli accessori per il l’assaggio dei fili e nei bracci ha un sistema di ammortizzante che si regola in base al peso del monitor. Questo sistema rende lo spostamento degli schermi semplice per avvicinarli, allontanarli, metterlo verticali o orizzontali senza smontare nulla.
Nella confezione si trovano due tipi di attacchi per il tavolo: 1 prevedo il foro del tavolo. 2 a pinza senza bucare nulla.
Ps: stabilit collaudata anche dal mio gatto che ci sale e salta senza problemi.
Consiglio tracciabilit del prezzo per l’offerta pi conveniente
Compar a celui que j’ai achet pour ma conjointe shoppingall celui ci parait plus robuste, bouge beaucoup moins, est plus stable. Bref semble plus robuste.
I read through the reviews before buying, so knew I’d probably need space behind my desk. I put it together with the G clamp first so I could move the clamp around to get the screens in the right place. I moved it off to the left to get around the problem of needing space behind my desk. The G clamp, with cables, does take up space at the back of this desk and this is where I found out that my IKEA desk isn’t very stable. Before, I had the desk pressed against the wall/radiator, but with the G clamp I couldn’t do that. Any movement on the desk made the screens wobble. So I took the advice of one of the other reviews, drilled a hole through the desk and used the bolt. With the pole off to the left I don’t need any space behind and, with the bolt, I can push the desk against the wall and the screens don’t move when I type now. This is a good quality product which even supports my poor quality desk!
Really sturdy, the cable management is easy to do, but if your screen is a bit heavy, it can tilt down if u touch it a little bit. Overall a super good product for its price. I recommend it.
The arm is a little weak for the 32 inches monitor.
This is a very sleek looking design, easy to setup and holds my 2 24″ monitors perfectly, I love the range of motion!
I brought a highly rated one before this but it was so clunky and very rigid.
The gas component within the arm is so convenient and it can adjust to any variantion.
This is such a well thought product and a thorough 5 Stars!
Assembly – Very easy to assemble. Great item if you’re a neat freak, and just wanting more desk space.
Range of Motion – So I may just be an idiot but I can’t figure out how to adjust the height. I’ve watched their video and read other comments but I’m unable to still fix it nor can I even reach the screw in the arm. This is my only qualm with it. Otherwise it’s great with my L-shaped desk.
Sturdiness – I just used the clamp and cut out some cardboard to secure the clamp to place. This was recommended in the manual which works like a charm! I have 2 17″ monitors that are very sturdy. The distance works well ergonomically too. Forces me to actually sit more proper.
Now if I can only figure out how to adjust the darn height on one of the monitors!
Very easy to assemble ; has different setup options. Sturdy, stable and looking good.
Sturdy. Not as compact as I hope.
It is still good for what I paid. 90CAD.
Only time will tell if the arm can actually hold my 32inch monitor long term
Worked where 2 others wouldn’t for the weight of the monitors.
Me ha gustado que es muy fuerte y puedo colocar los 2 monitores en cualquier posicin, adems si pudiera comprar un brazo a parte podra colocar otro monitor ms. No me ha gustado que no fuese extensible.
It is working fine with a pair of 27in monitors. The arms flex a little so its is tricky to bring the monitor to the exact position you want. To adjust it, simply pulling the monitor to a position does not work because when you release the monitor it drops a little. The trick is to adjust it by manually flexing the arm joints one by one.
Excellent achat. Mon chum qui est un gamer capote ! Il met deux crans 32 pouces curv sans aucun problme. Il adore !
Il prodotto molto pi bello di quanto mi aspettassi ed molto comodo. Si pu (e si deve) regolare la tensione del braccio e dei vari angoli regolabili che si trovano sulle braccia e mi raccomando fatelo solo dopo aver montato il monitor e facendo attenzione dall’inizio alla fine del procedimento a non farlo cadere. QUANDO TOGLIETE I LACCI CHE NELLA SCATOLA CHIUDONO LE BRACCIA FATE MOLTA ATTENZIONE PERCH SI APRONO CON MOLTA PRESSIONE ALL’INIZIO.
Lo scorricavo che scorre dietro al morsetto molto comodo, nonostante sia fatto di plastica e non rimane saldissimo pu aiutare come punto di riferimento nel caso doveste far passare i cavi da dietro la scrivania. Che, pensavo fosse male..ma invece pi bella di prima con quel centimetro e mezzo di distanza dal muro.
Le braccia permettono di far scorrere i cavi al loro interno nella prima parte del braccio e all’esterno nell’altra parte, tramite un “corridoio” di plastica in questo caso. Nella prima parte del braccio si pu svitare un vano dove far passare ad esempio un cavo hdmi e poi farlo proseguire sull’altra parte del braccio e infine al monitor. Nel mio caso con in cavo hdmi di spessore normale (pi spesso di un caricabatterie, ma FORSE meno di un cavo per monitor) lungo poco pi di un metro e non ho problemi a far raggiungere un eventuale monitor (che non ho ancora posizionato, ma sicuramente ci arriver) e far scorrere il cavo dentro dentro il vano dove riporre i cavi, a tutte le altezze possibili riesco a collegarlo al MacBook posto nell’altro braccio facilmente, oltre che ad una Xbox posta nell’angolo superiore di una scrivania 140x60cm
La scatola contenuta e molto pesante, come pesante questo accessorio per la scrivania. Nel mio caso ho una scrivania molto spessa e son sicuro che regger, ma se usate quelle scrivanie sottili le istruzioni raccomandano di usare un legnetto da mettere fra il morsetto/vite in modo da distribuire il peso e non rompere la vostra scrivania (pi grande sar la superficie del legnetto pi il peso sar distribuito e pi sicurezza avrete)
PROBLEMA
C’ un po’ di gioco usando un vassoio per notebook, posizionando il mio mac sul vassoio e mettendolo in orizzontale leggermente inclinato sull’asse orizzontale il monitor, una rottura di scatole provare a trovare la posizione perfetta che ancora non ho trovato. Non so se sia un difetto perch devo ancora provare a montare un monitor che deve arrivarmi. 1mm o meno, ma che si nota.
This dual monitor mount is excellent! I have an ultra wide as my secondary and a 27″ as my primary, and both have lots of room to move! If you mount your monitors like I did, with the mount offset from the Center of your desk, having 2 monitors isn’t an issue in terms of clearance behind the desk. My desk is about an inch away from the wall and the arms don’t even come close to hitting the wall when I adjust the monitors. Highly recommend this mount!
This stand perfectly fits both my monitors, which is something I struggled to find for a while mainly because of my older monitor being a bit smaller than my newer one, which is a bit bigger. The mount is a little wobbly; this could be because of my desk so I wouldn’t take this with a grain of salt. My older mount had a stand instead of a clamp, so this freed up a large amount of space on my desk. This is a major win for me as of now I can fit my stand up mic mount onto my desk without excessive clutter if any at all. The arms of the mount remain very sturdy and it doesn’t loosen up over time unlike my older mount, as least so far. I can update this review later on to tell more about this later if a new problem appears. Something to keep in mind is to stay calm when putting this mount together. I personally struggled to access the bolt that loosens the gas springs, however others seemed to find this easier. Overall this is a major improvement from what I was using before with one tiny flaw so far, making me very satisfied with the overall results.
The kind of mount I was looking for 27″ monitors. Great product, very stable and sturdy. The range is well good and can handle it properly. The arms are gas which makesthe monitor to stay in one position. Love this mount!!! I wanted to buy it again but the cost is doubled now. When I purchased back in March 2021 it was $59 loll
After some intense research trying to not spend a fortune I found a happy middle ground. This monitor stand may not be the AAA quality you find in large offices but it definitely adequate for my home office. Can support my two 27′ curved monitors.
Assembly is pretty easy, two option either drill though the desk or clamp on (I choose the clamp option and it works just fine) if you’re not the strongest person it will always help to have a second pair of hands when assembling.
Look
The monitor arms aren’t that bulky and support cable management which is a good plus, overall there’s a decent amount of “customization” on the positioning.
If you’re looking for a not crazy expensive arm
To support two monitors this has my vote
Overall, the product is good. It has minor flaws.
It seems to me that the little markings on the arm that show which direction to turn the tension adjust screw are backwards. Turning towards “-” should get less “push” out of the gas spring. Doing that seems to give more push on mine. I put a light monitor on one arm and it wouldn’t stay down. I had to turn the screw towards the “+” mark to get less gas spring tension. The adjustment works fine but the markings seem misleading.
Attaching the monitor to the mount is super easy as they left the top 2 screw holes on the mount open at the top. Simply start 2 screws into the top 2 VESA screw holes on the back of your monitor, and you can just slip them into the mount. The monitor will hold itself in place while you insert the bottom 2 screws and go back to tighten the top 2. That was a nice touch.
Like many others have mentioned, one arm was fine but the other was loose on the Z axis pivot allowing the monitor to swing under it’s own weight. Since my motto is “WD40 for things that stick when they shouldn’t, and duct tape for things that don’t stick when they should”, I thought about duct tape. I decided to go for an even easier fix. I made sure that nothing was sitting on the desk under the pivot point and used a 1ml syringe to put about .75 ml of soft drink into the little cup where the pivot pin is and then and went to sleep. This morning, the monitor does not move on it’s own. Problem solved. I’m sure any soft drink will work. 😉 EDIT – This has worked great. The monitor has not moved on its own since I did this.
Overall, I’m happy with my purchase and would buy it again.
I was very happy with my purchase. I do wish the instructions were a little clearing for raising/lowering the arms. Also important to note is that the range of motion for the monitors works best when the desk isn’t pushed up against a wall but rather had room behind as well.
Has handled 2x 27in monitors for around 7-8 months now with no sag or loss of tension. Setup was pretty easy and not too hard to get the monitors where you want, just leave sufficient space behind your desk as the arms can stick out quite a bit depending on where you place your screens.
I have a 32 ” and a 21″ monitor attached and this is solid. Lots of adjustment so you can have zero-G movement up and down. Stops wherever you stop moving it. Some people might need a second person to assist setting this up since it can be a bit awkward. I didn’t drill a hole in my desk in case I didn’t like the location. I used the clamp option that comes with it and it is solid as a rock with NO wobble at all. Of course it will only be a solid as your desk so make sure your desk can handle it. I would definitely recommend it.
Super happy with this. High quality and sturdy components and a deal for $99 CAD. Works great, allowing flexible range of height adjustments from sitting to standing. Fantastic
I move my monitors a lot constantly changing the angles, side to side snd up and down, I bought this unit @ 6 months ago and it has functioned perfectly. at the price just cant be beat and you’re sacrificing nothing. Both thumbs up.
This is my first monitor stand and I was recommended by a friend to purchase this and it did not disappoint! Very sturdy and well packaged. Easy to assemble and adjust. Looks perfect on my desk now and clutter free
This monitor stand allows you to change your sitting posture on the go. Higher, lower, change angle- could be easy done by using your hands in seconds. Two monitors could be placed differently the way you like. Additionally I have more room on a desktop. Particularly I like that it’s sturdy.
Using it to hold a 27″ (Dell 2721DGF) and 28″ (ASUS VG289Q) monitor in place easily, no droop or sag after months of use. Though the picture above has monitors held together, they can still be separated at least 4 inches, swiveled and extended forwards about 1.75ft from the mounting. Would recommend. (I ended up buying a base plate for the stand after 2 months of use because I didn’t know if it could damage the table in the longer term). Note: There is no rough use and I don’t change orientations of the monitors very frequently. Just once a day on average. The monitors can be tilted but the design looks like it is meant to be keyed tight and not tilted frequently.
Used one for my monitor and the other arm to hold my computer up. If you tighten the arms they can hold more than sugested weight. Recommend adding a block of wood to table clamp to increase surface area for stronger anchor.
If your looking to move the screen freely make sure you stay within the recommended weight. If you have a heavy screen you can tighten the joints but loose ease mobility.
I am not familiar with monitor stands such as this one so it would be difficult for me ton compare but I think it’s good for the price. My primary screen is a 31,5 inch curved monitor that weighs around 17 pounds and I feel it’s pretty close to its limit. Now that it’s properly set up I’m confident it’s stay in place but I feel like it would break apart if I was to readjust it every day.
It was very easy to assemble, straight forward. It needs to be away from the wall in order to get full range of motion. It does the job, no real complaints. Only thing I would suggest is if the wire brackets could be bigger, it has trouble holding the wires coming from the monitor.
Quand j’ai reu la boite et un jour plutt et bien ma grande surprise de voir cet quipement fait solidement avec des matriaux de qualits, un concept bien pens jusqu’ prvoir des endroits pour passer le filages pour que ce soit scuritaire et esthtiquement qualifi de bon gout et que nous pouvons manipuler
scuritairement et facilement et pour terminer le prix incroyablement bas. WWWwwwooowwwWW
This holds up two 24″ monitors with ease. Gas cylinder is all the way screwed out and it works just fine. Wish the tilt adjustment was some sort of spring system instead of a tightened screw but to accommodate many monitors I understand why it is not. I did have to tighten a couple of bolts here and there.
Getting the monitors in the position you would like them is a little tricky. I would recommend playing around with where on the table you camp down the stand (not directly in front of you). Play around with how the collars are rotated on the shaft as well as their height on the shaft. I would say positioning is most difficult if your desk is right up against the wall like mine.
This can be a bit stiff until you adjust the tension screws. So, be sure to do that. At the same time, if you’re grabbing an IKEA or other particle board desks, I suggest you put a thin piece of wood between the upper and lower clamp. That will keep the integrity of your desk in order.
Be careful with the cord management compartments. The tiny screws are really TINY. I lost one during assembly. I suggest you put them on some scotch tape to keep them from getting lost.
What’s really great about this stand is the ability to adjust height and swivel. This is something I didn’t realize would come in handy until you actually get it and start messing around with it. it opens up entirely new possibilities.
Nice arms, sturdy when tightened, work as expected and I would purchase them again or recommend them to a friend
Great value for the price. I have 2 Costco LG 27 inch monitors hooked up to this and it works great.
AWESOME!!! I was very surprised and impressed with the order, and the shipping as well as packaging of this order. I encourage everyone to grab one of these kits.
This unit has good range and mobility. Tilt and swivel works well. Easy to assemble and comes with hardware to install by clamp or mounting through a hole in the desktop. Clamp is solid.
Very good with 2 27 inch monitors. When I tried to put a 32 inch monitor on it, it got too bouncy for my liking.
Bang for buck, this might be one of the best dual Monitors mounts out there. I wanted to stack my Alienware 38″ Ultrawide and a 24″ for streaming. It was able to hold the weight fine, I ran into zero positions issues/sag and it has less wobble then my previous two mount setup. I also had quite a bit of room to spare up top so I would imagine it would hold a 27″ no problem. Hope this helps someone out there! Cheers
This dual monitor stand was a smart buy. It removed the previous stand to the edge and cleared more desk space. I have used it for a few different weighted monitors and with a slight adjustment it worked well. Definitely recommend!
Tengo 2 monitores, un UltraWide de 29′, y otro monitor de 20′, ambos los pude acomodar de manera adecuada como lo pueden ver en las imgenes que sub, a mi parecer los brazos no estorban eso si, tienes que tener separada la mensa de la pared si quieres acomodar como tu gustes los monitores.
Estar actualizando la resea en caso de ser necesario
Great product, all in all, but if you have two identical screens, they will not sit side by side. One will be slightly higher than the other. If you’re cool with that this is perfect for you.
I was looking around for monitor mounts and stumbled upon this one which had a wide range of motion+gas springs. I loved the fact that I was able to choose however I wanted to position my monitors however there is one major drawback that kept it away from a 5 star.
If your desk is NOT against the wall, I highly recommend buying this monitor mount especially when it’s on sale as it’s cheaper and the quality lives up to other brands.
If your desk IS AGAINST the wall, you will definitely need about 7-10 inches of clearance which would be a potential deal breaker for most. (I have 2 24 inch monitors so the space may vary)
If you have a large desk like me (74 inches), I recommend positioning the monitor arm a lot more to the left or right in order to minimize the amount of clearance at the back and to have your main monitor centered. I currently have about 3-4 inches of clearance and it’s hardly noticeable plus I still have a great range of motion with my monitors.
In terms of the built in cable management, it’s alright but nothing too impressive. There is a 2nd and more hidden compartment however I found it difficult to get cables in there because the compartment is quite small and just barely fits 2 cables (hdmi/displayPort + Power plug)
Overall, this is a solid monitor mount just beware of the amount of clearance space needed behind your desk before you buy as I was considering purchasing a much simpler option.
Very good stand! It was easy to install, took me about an hour and a half to get it all ready. I have it with one asus 24″ monitor so far but as soon as i get the second one I’ll let you know how it goes. Material is great btw
Updated: added another Asus monitor and it holds perfectly both of them. Able to adjust them in any way i want to get them in the perfect spot. Been using it like this for about 6 months now and no complains at all
Holds a pair of Dell P2719H(C) monitors with no issue. Easy to install and adjust using the through-desk mounting method for a nice clean look on our custom desk.
Hubby had a bit of a fit getting it adjusted just right (3+ monitor set up, so we wanted arms positioned ‘just right’). Once it was all done, we are both happy with how it turned out. Very sturdy and the arms hold up well. Thank you
I have a 29″ ultrawide monitor, and a 24″ monitor. Of course the VESA attachments on the back are at completely different locations. While I got them both mounted and working, they’re still about an inch off from each other. I’m impatient so I left it as is.
This dual monitor mount is very nice and good quality. I never purchase them before and if I would buy an other one I would for sure buy the same. I’m using two monitor 23″ but I’ll also try in the future my two other 27″ monitor . I purchase this one because wanted to make sure to future prof to size higher then 27″ in case I upgrade.
I’ve changed this from my previous loose stand for my 27” curved and 24” flat monitors, now it felt much stable and legit.
Works great for Over/Under setup with 2 x 27″ monitors which is what I bought it for.
Great range of motion, extremely easy to assemble and adjust, feels very sturdy. Better than I expected for the price point!
I really like how easy it was to assemble. I also love the look and the space
This dual monitor stand is an excellent product of superior quality. I would recommend it to anyone needing a sturdy well made product. The price is also great.
I don’t have anything to compare to in terms of other stands but this one does the job perfectly well. It is a great addition to my sit /stand desk and allows me to get monitors in perfect viewing plane
Parfait comme la description, J’ai une 32 pouces et une 24 pouces. Rotation parfaite et bon maintien de la positio
Just received my item. I’m very happy of it for now. It took me roughly 1h30 to install it with my 2 screens.
There are things important to know tho:
– There is some cable management tool in it, but you need long cables to use them (it’s not my case)
– If your desk is not very stable like mine your screens will move with every small hit against your desk
– You need to keep some space between your desk and wall. This is important so that arm have enough in order to keep the right distance between your screen and eyes
Otherwise that’s exactly what I wanted and I now have my screens at the right position and have free space on my desk! Love it.
The Item came broken in the box, be it just the soft plastic covers over the actual arm but it works great!
Just bought this for my home office, its gas spension is little hard to make adjustment for monitor’s position but once it is done, everyting work fine. I can build a desktop with two monitor (a 27″ and a 21″) and clear the spce orginal occupied by their stand. There is more freedown to change the position and layout. Overall it is a good buy.
Product came very quickly! Was simple to assemble and the clamp is large enough to provide quality sturdiness. There is very good range of motion for turning your screens sideways or for pulling closer to your line of vision. I would have enjoyed more of a tilt on the pivot point nearest the screen to allow more of an angle upwards or downwards on the screen. Awesome product thats worth the price and greatly improves desktop space with easy cable management and looks heck’n professional when its set up.
Holds my curved Samsung 24″ and 27″ with no problems. I’m not sure on how well it’ll hold a 32″ as my 27″ sags and required tightening (no sag now after adjusting).
My only grievance is when you need to adjust the screens (depending what you’re doing) sometimes you’ll have to use the Allan key to adjust it. And if you want to lower the screens or raise them up – again you need to take the screens off, adjust and reposition.
So if you plan on having minimal manipulation in the vertical direction, this works for you.
If you want to freely raise, lower and tilt with minimal effort, I would suggest a better unit.
For my purposes, this works and looks very clean. The setup was simple but manipulation was tedious. I do not plan on moving my screens often – so it’s fine.
Beware that if the back of your desk is situated against the wall, the you won’t be able to make the monitors touch, side to side, unless you position them way forward.
I’m using these with 2 Samsung 24 inch SR35s that I also bought from Amazon. I had to crank the weight adjustment bolt way down (clockwise, around 10 turns) to have the monitor be able to float.
The stand is sturdy and has no problem holding the two monitors. I do wish it was specified that you can’t have the monitors touch unless you have space clearance behind your desk – or if you’re willing to have the monitors be 7 inches from your face.
Assembly was straight forward. It claim with more than enough bolts for the vesa mount. Longer length bolts and spacers too which I didn’t need to use.
Overall, good value, very sturdy, but I do wish it was designed so that my monitors could touch when positioned close to the wall. I’ve attached a picture. Having said that, I did find an alternate use for the gap between the monitors…
Arrived on schedule. Easy setup. Used the grommet type for install. Set up a couple of monitors – one VESA and the other a non-VESA (with a VESA adapter). Works as described.
Easy to assemble, sturdy, range of motion is excellent, gas spring tension is simple to adjust.
Holds two 22″ monitors with ease.
The mount is compatible with VESA 100×100 or 75×75
The only improvement/feature I would have liked would have been to have quick release plates that attach to the monitors and then get clipped in to the stand.
I love this stand ! Once it is well adjusted to the weight it holds it tight. I have noth8ng bad to say , realky satisfied.
I have 2 24″ monitor and no problem one beside the other one.
After setup, this stand seems to work pretty well. But setting it up was a pain! The adjustment allen screws are very hard to get to or adjust, as you cant’t even get access to the bottom ones if the monitor is mounted (so every time you want to adjust the position you have to take the monitor off, then adjust, then put it back on and plug everything back in to check the screen, etc. And I have my desk set up against a wall, so adjusting the top screws was again problematic. And the whole assembly is very sensitive, causing it to jiggle constantly even though everything is snuggled tight.
That being said, once the adjusting is all finished the finished product looks good and performs reasonably well(the jiggle being the only ongoing complaint) and gave me a lot more desktop space, so I’m not terribly unhappy.
Lots of love to everyone!
Very easy to install, will fit on almost any kinda of desk. Range of motion is very good. My setup has two 27 inch monitors and does not shake or move at all. I highly recommend this product.
sure there are some weaknesses. i found the tilt being dificult to manage, and rotation for my vertical monitor difficult too. however, it does the job, and the rest works fine. monitors wable a bit on my table on intense typing but that is because it’s mounted to the desk, so i’m sure if i brace the desk to the wall it might help stabalize it a bit. I mean, you can’t go wrong at this price, just look past the weeknesess and make due. better than having my desk cluttered with individual stands.
This thing is awesome! Super adjustable in many directions (forward/back, up/down and side to side). Set up was super easy! I do recommend being patient with adjusting the arms to get your screens leveled, it takes about 5-10 mins to play around with the tightness. I recommend 10x over.
I bought the dual and single and so far so good. It handles my 2 27″ monitors well. However, becareful of having monitors that are too heavy, as they will droop down uncontrollably.
I’ll never go back to not using a product like this. The amount of desk space saved, and increased options for viewing (I can watch movies from bed now). Love how this works, and it wasn’t hard to install. When you figure out the gas spring you will LOVE how it works.
Love this thing, a good price for an aesthetic and extremely functional upgrade to any dual monitor setup.
The range of motion is limited by the height of the pipe the monitor arms attach to. I have a 27″ 16:9 monitor and a 25″ 21:9 monitor. I cannot stack these monitors and have my bottom 21:9 monitor be at a good height. My lower monitor is about 2″ lower than I wanted at least and I cannot raise it without covering my top monitor. The top monitor is about half as tall as the lower one so I have no idea how they can advertise two 27″ monitors stacked at maximum. You probably couldn’t have larger than two 23″ monitors stacked at a decent height.
However, simply add a 2×4 block between your desk and the mount to raise the base up. Obviously not engineered properly, but should be sturdy enough when tightened down. I will have to unmount my monitors to do this, but that’s not a big deal because they slide off the top of the pipe easily enough.
Once set up properly, (took 2 mins)
your monitors will defy gravity!
Love the fact you can rotate to portrait mode for reading documents
Great dual monitor stand for the $$
Freed up a lot of space on my desk!
Several mounting options
(included hardware)
I may end up mounting to my wall, as my desk is a little flimsy.
Monitors move slightly when aggressively gaming, but this is no fault of the product, it’s my IKEA desk!
Installed mine with the C-clamp option and used two 27″ Acer monitors. Really easy to install and so far love the improved ergos on my desk. Cable management was also nice and tidy.
Easy assembly overall. The gas shocks are a little confusing since you have to manipulate the arms down while simultaneously adjusting the allen key to set the shocks where you need them. That is not listed in the directions, so just some clarity there would be nice. Overall a good product and holding my twin 24″ screens up with no trouble. Even better buy at Black Friday.
Absolutely amazing monitor stand that frees up a bunch of desk space and gives you endless screen configurations! Easy to set up and amazing build quality
Ajustement of tension to stabilize arms a little tricky. Instructions are clear enough to get through that step. Overall product is very good
Bought for home office. Hung two 24″ Benq monitors. Very study and easy to adjust. Assembly was dead easy and it came with little Allen keys. Good cord management too. Looks and feels like a quality product. Very pleased, would highly recommend.
I have a fairly unique monitor setup because of how my desk and PC are right next to a shelf. I only have room for a small second monitor which I traditionally have kept oriented vertically, because I 1) use it mainly for chat apps like Discord, and 2) it keeps the main monitor centred in front of me.
This monitor stand is great in the event that I really need two landscape screens–it’s fairly simple (albeit time-consuming, but that’s just due to my perfectionism) to move my main monitor over and rotate my second monitor to a landscape orientation. Installation instructions were pretty straightforward to follow too; I was done in only about an hour.
I do have one major complaint though: The cable guides that go on the upper parts of the arms are utter crap. They need to be screwed into holes in the arms with self-tapping screws, which is VERY difficult to do given that you’re supposed to do this once the monitor stand and arms are attached to your desk, and thus said holes are facing downwards with only about 2 feet of clearance from the desk. I wound up stripping the screw holes and I had to give up on using the cable guides.
Overall though, great monitor stand.
This is an excellent dual stand. Solid and sturdy and very good quality. Only complaint is that I wish it could go a little higher.
I bought those for a hidden cabinet desk I built so I could stack the monitors in the cabinet when the desk is folded up and hidden. And then pull out each monitor to face either side of the desk for use by 2 people on either side of the desk.
Works great for the application.
Only complaint is I wish it had lover arms. Also please add dimensions to ad!
This is definitely worth the money paid. Instructions are fairly easy to understand. What I found troubling is it isn’t the easiest to raise or lower the monitors. I’m using this one for home, I bought one before from staples at twice the price. Does the job
I was searching for a Dual Monitor Arm so i can place both of my Ultrawide Monitors on top of eachother and i wanted to clamp it on my desk , now i saw options going rather expansive for that then i found this one , i absolutly love it , at first i was a little skeptical because those are two huge monitor and togheter they are rather Heavy the bottom one is a 34 inches and top one is 28 inches . as i opened the box , it was alot more heavy duty then i thought alot bigger than i thought , it does shake a little but only when i bump into my desk or move it a little , my desk isnt that sturdy to begin with it moves a little so it was to be expected i dont blame that on the product but on my desk , while typing i dont see it move or while gaming its still. Absolutly Amazing , if i had to buy another one i would without a doubt. I can recommend without a doubt!
good, sturdy and rigid, some people wrote that wont hold monitor well I put the arm in lowest setting of tension , if u expect to hold a 30 inch tv or old heavy screen prob wont do the job but for any average newer monitor it will do the job.
I’m very happy with this support. It was easy to install, and I can place my screens exactly like I want them, to the millimeters. We’re actually buying a second one because my husband got jealous and wants one too.
Purchased this as a replacement for two monitor clamps to give my desk a cleaner look. There are dozens, if not hundreds of these mounts and they more-or-less have the same performance. I decided on the HUANO brand as it had an overwhelmingly positive amount of reviews and fit my budget.
Packaging:
Packaging was extremely professional, with linings to protect each assembly piece. It came with all the tools necessary to assemble the entire mount, and also came with both the C-clamp and grommet-style clamp so you could choose how to install the mount.
Installation:
Extremely simple. I’d recommend having an extra person help, but this can be done solo, just take your time. Instructions were fairly clear. The only issues I had were in regards to the cable management pieces. I still don’t really see the value in using them but have installed them regardless. I went with the C-clamp installation, and it’s extremely easy to adjust the mount to ensure you’ve got enough space after mounting your monitors.
Note: Make sure your desk/tabletop has enough clearance to either clamp or drill a hole into. This is essential, as the last thing you want to happen is for your mount to fall and possibly cause damage to both your monitors.
Mounting:
This is where I had the most trouble. These mounts are for VESA-compliant monitors. I am using an LG 27UK850 and LG 27UK650 with this mount, and the 650 fits in just fine, but for some reason, the design of the mounting plate does NOT fully fit the 850. I managed to get it screwed in enough to make it work, but no matter how I angle the plate, it’s not a snug and secure fit like on the 650.
Power:
These gas springs are STRONG. I had troubles mounting my screens by myself because the gas spring kept launching my monitors up, and I needed to leverage the table top to get the screws in. Everything is adjustable, however. Once I adjusted the tension I was able to mount my monitors.
Adjustability:
Just about every angle is adjustable with this dual mount. It’s been a few weeks and I haven’t noticed any sagging / re-adjustments so the springs seem to be very sturdy. This could change over time, but so far no issues.
Conclusion:
I’m very happy with my purchase and would buy it again if I had to. Word of caution: If you’re mounting two 27″ monitors, make sure you’ve got enough space for them, and measure out the total weight. Weight isn’t really an issue with these monitor arms, but with these dual monitor arms, you are adding a lot of pressure at one point of your table top. I have a relatively cheap desk made of .5″ thick plywood, so my biggest concern is that eventually the added pressure will be enough to break that area.
The stand works very fine, I am using it with two 27″ BENQ monitors and I have nothing to complain. They are relatively easy to adjust, monitors stay at the adjusted position. I am happy with it.
The only thing that I would have liked better is a little more length for the arms. Using this for my 2 27inch monitors is really at the extreme. I will stay with it, but next time, I’ll pay a little more to get longer arms.
I was a little hesitant buying this with only one five star review showing, but it was one of the few (out of many) stands that can put 27″ monitors in a vertically stacked configuration. The box was well packed, the instructions were clear, and the installation was effortless. Afterwards the adjustment didn’t take long to finish. Just a tip, the objective when you adjust the pressure in the arms, is to set it so the arm can hold the monitor in place but you can freely move it up or down without the monitor falling. Doesn’t take long to do.