Makita DBN600Z Cordless Nailer 64 mm 18 V (Without Battery, Without Charger)
DBN600Z Battery Head Nailer 18V
The 18 V drive of the cordless head nailer protects the environment, but provides full power. The magazine capacity is max. 110, using nails 25-64mm in length.
At a maximum weight of 3.8 kg with the BL1860B, the head nailer is 296 x 108 x 318 mm.
Versatile and compact
The DBN600Z can be used for both single and series triggers. During the series release, only the contact foot must be placed on the workpiece, the actuation of the trigger is no longer necessary. With a battery charge of a BL1840B, up to 800 nails can be processed. There is a viewing window for control so that the nail supply can be seen at any time. In addition, the battery head nailer is equipped with an idle protection, an adjustable depth impact and a lightweight LED.
Powerful and durable.
The DBN600Z is powered by a 18 volt battery. Batteries with 1.5 (only BL1815N) up to 6.0 Ah can be used: the higher the amp hours (Ah), the longer the battery compression head nailer can be used with a battery charge.
Technical details:
- Nail length: 25 – 64 mm.
- Magazine capacity: max. 110.
- Number of nails/clips per battery charge: 800.
- Battery voltage: 18 V.
- Dimensions (L x W x H): 296 x 108 x 318 mm.
- Weight: 3.4 kg (with BL1815N, BL1820(B)) or 3.8 kg (with BL1830(B), BL1840(B), BL1850(B), BL1860B)
Battery Compatibility
The Makita tool range and Makita garden range can be used across with the Makita 18 V batteries. The wide range of high-quality professional tools offers extremely powerful and reliable work support with 18 V and 2 x 18 V power for a wide range of tasks. With the separately available Makita DC18RC quick charger, the batteries are gently yet effectively recharged within a short charging time. With the DC18RD quick battery charger, even two batteries can be charged in parallel in the usual fast time.
Without battery or charger.
The model is shipped without battery and without charger. This saves you costs if you already own compatible 18 V Li-ion batteries from Makita. These are compatible with a wide range of devices. If you don’t have a Makita battery yet, you can get started straight away with the Makita Power Source kit. The model is delivered in a box.
| Weight: | 3.8 kg |
| Size: | Size |
| Dimensions: | 29.6 x 10.8 x 31.8 cm; 3.8 Kilograms |
| Model: | DBN600Z |
| Part: | DBN600Z |
| Colour: | Colour |
| Pack Quantity: | 1 |
| Batteries Required: | Yes |
| Batteries Included: | No |
| Manufacture: | Makita Werkzeug GmbH |
| Colour: | Colour |
| Quantity: | 1 |
| Size: | Size |
Overall this nailer, as most Makita products, has a good build quality and it’s robust. It’s very easy to use, no complicated adjustments and can shoot up to 64 mm nails. If you’re a hobbyist who wants a cordless nailer and you’re in the Makita battery system, I think you won’t regret buying this.
But there are some cons as well. The nailer is pretty heavy and bulky – of course you need a powerful drive and a battery for such device, so just count with it. It also means, you might not reach tight spaces.
As many others mentioned, the nails get stuck quite often. We used 50mm genuine Makita nails and had this problem since the beginning. It’s very easy to open the quick-release mechanism, remove the nail and go on, but if you do it every 10th or 15th nail, it slowly drives you crazy. Also, if you have only a few nails left in the stack, nails get stuck more often. Again, for hobby use it’s not so bad, but if you work with it daily, better search for some other device.
I love this tool.
Came in a box/bag as apposed to an official Makita box.
Obviously new and unopened.
Works perfectly every time.
Haven’t had any stoppages as yet. Used over 500 nails so far.
I have other makita tools so use interchangeable batteries.
For a battery powered nail gun it’s pretty damn good!!
Setting the nail depth works well too, as does the sequential fire mode..
To be honest – can’t fault it so far – would recommend.
Die Maschine kam, ungeschtzt in einem normalen Karton (nicht original Makita) bei mir an (siehe Bild). Der Karton war an der Unterseite bereits halb offen. Es lag keine deutsche Anleitung bei, nur eine in English und anderen Sprachen und der Grtelclip war bereits angeschraubt.
ERGO: Das sieht gebraucht aus? Ich hatte eine neue Maschine bestellt!?
Dennoch scheint die Maschine zu funktionieren, daher ziehe ich nur einen Stern ab.
Alles in allem scheint der Verkufer aber nicht wirklich vertrauenswrdig.
Had it for a while now and use it at work quite a lot and it’s not failed me once
Slight ramp up time but still saves me a lot of time I’d recommend to any tradesman
Bit pricey if you’re into diy but all in it’s a decent piece of ki
Had it for a while now and use it at work quite a lot and it’s not failed me once
Slight ramp up time but still saves me a lot of time I’d recommend to any tradesman
Bit pricey if you’re into diy but all in it’s a decent piece of ki
Have used it a lot since arriving . It is true that it is quite heavy .but the great build quality explains most of that .so far loving it .
Have used it a lot since arriving . It is true that it is quite heavy .but the great build quality explains most of that .so far loving it .
Quite heavy easy to use nice not to worry about gas good buy
Quite heavy easy to use nice not to worry about gas good buy
Excellent bit of kit got all the size nails. and it doesn’t disappoint they all were drivin in to various materials with extreme ease. also with the depth adjuster too great product 10/10
Excellent bit of kit got all the size nails. and it doesn’t disappoint they all were drivin in to various materials with extreme ease. also with the depth adjuster too great product 10/10
Strangely 16g nail were not smaller than 18g nails but were in fact were bigger and heavier.
Strangely 16g nail were not smaller than 18g nails but were in fact were bigger and heavier.
Amazing tool. Using with 18v 4ah batteries at the moment and works fine. Absolutely love i
Amazing tool. Using with 18v 4ah batteries at the moment and works fine. Absolutely love i
Very pleased with the operation. I have numerous Makita cordless tool so this was an easy selection. I have no regrets other than it is a bit heavy compared to my Paslode brad nailer.
Very pleased with the operation. I have numerous Makita cordless tool so this was an easy selection. I have no regrets other than it is a bit heavy compared to my Paslode brad nailer.
Dafr hab ich mir die folgenden Stauchkopfngel bestellt: Tacwise 0301 Nagel, 64 mm. Damit sind die Dachlatten fest. Das Gert ist nicht gerade leicht aber immer noch besser als hunderte von Ngeln mit dem Hammer einzuschlagen. Klare Kaufempfehlung.
Nicht gerade Preiswert aber sein Geld wert. Das Anschieen von Dachlatten fr ein Verkleidung – hervorragend. Auch das befestigen der Bretter sehr gut.
Dafr hab ich mir die folgenden Stauchkopfngel bestellt: Tacwise 0301 Nagel, 64 mm. Damit sind die Dachlatten fest. Das Gert ist nicht gerade leicht aber immer noch besser als hunderte von Ngeln mit dem Hammer einzuschlagen. Klare Kaufempfehlung.