Noico 80 mil (2 mm) 36 sqft (3.4 sqm) car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
| Weight: | 12.4 kg |
| Dimensions: | 56 x 28 x 7.6 cm; 12.38 Kilograms |
| Brand: | Noico Solutions |
| Model: | SNL1 |
| Manufacture: | Noico Solutions |
Adhesion must be pressed in. Suggest the recommended tool or facsimile. Easy to install if you give yourself the time to do it right. Noticeable noise reduction. I would recommend.
Best bang for the buck! Works equivalent to comparable products that retail for triple the price.
Bon produit. Ce travail bien et colle bien. Parfait pour rduire un peu le bruit mais vraiment efficace pour les vibration.
I was getting lots of noise in my car due to the roof rack. I fitted this sound deadener above the roof lining and the noise is much reduced.
Using this to sound deaden a plastic standby generator box. Test for Db’s before and after installation show a massive drop in sound. Very easy to stick and trim.
Very easy install, HIGHLY recommend gloves while installing.
Also the sound deadening made a huge difference for only $100
Like the others have said, it’s great material! Still sticks after having to peel to correct a mistake or two which is nice and boy does it ever stay once rolled/pressed! Seems would need a total of 3 of these to sound deaden a jeep liberty but can easily make 2 work if you’re not covering every square inch. It works and does reduce road noise quite nicely, it’s most effective when placed along the doors, firewall and wheelwells.
ho sentito un leggero odore nell’abitacolo senza che l’auto abbia preso il sole
tuttavia:
installato in una fiat 500 1.2, quindi leggerissima auto dai pessimi interni
su portiere dentro e fuori (vedi foto) e bagagliaio solo dentro ma da 2 lati (vedi foto)
grande pesantezza risultante, ma chiusura della portiera e bagagliaio senza indecisioni.
ottima riduzione di scricchiolii e vari rumori prendendo buche, avendo gomme rigide con spalla bassa erano molto stressanti. Suggerisco anche della spugna fonoassorbene piramidale nelle tasche per evitare l’effetto “corda di chitarra”.
comparto audio totalmente differente:
montando gi due casse di qualit decente amplificate aiutate da un subwoofer autocostruito e eliminazione dei woofer posteriori, avevo gi un buon sistema audio.
Appena concluso le casse frontali hanno iniziato a suonare in modo pi caldo e profondo con notevole pressione sonora, tanto da rendere inutile e indistinguibile l’utilizzo del subwoofer e rendere inudibile motore e asfalto a finestrini chiusi.
Suggerisco a chiunque prima ancora di inserire un subwoofer in un auto cosi piccola per esempio, di armarsi di pazienza e provare perch rimarrete molto soddisfatti. Personalmente inserir altro materiale fonoassorbente intorno al subwoofer per poter usare pi potenza e tornare a livelli equilibrati tra avanti e retro.
comprati 3,4mq e sono riuscito a completare portiere e bagagliaio con rimanenza di due pannelli interi e qualche scarto
One of the besg sound proofing come with so much did the whole boot of my mercedes w124 and the boot lid amazinf
The product is easy to install , placed out in the afternoon sun to warm up it becomes more pliable and makes for better adhesion when warm. Payed twice as much for another brand that was 50ml thick and not near the quality of the Noico
This is as good a product as you will find for Butyl sound pads
Adhesion is good and easy to work with inside the car
sheet size makes it easy to handle and install.
Delivery time was excelle
compre este paquete pensando que me llegaran 36m2 y solo llegaron 36ft, pero aun as el precio fue muy accesible y el material es muy bueno.
Just a little tip. Goo Gone easily removes this from hands and clothes after your done. The material applied easily and deadened a lot of road noise in my 2015 Mazda 3 Hatchback. 1 pack (36 sq ft) did 4 doors and floor pan. Needed another 20 cu. ft. (bought 2 of the 10′ packs separately) to do the hatch floor and rear wheel wells. Oh and make sure you buy new panel retainer clips (I used Autex’s) since some of the original ones will break when you remove them. Doors now shut solidly and the ride is much quieter.
The product was nice to use and cutting it waa no problem. I have already recommended this product to my other stereo friends
I noticed a difference in the noise level the first outing after installation.
Note: my advise is and the instructions did mention it wear gloves, I never and cut myself quite badly….there not joking. The foil is like a razor blade. 100% happy with the produc
A couple of minor points not so positive. The sheets are each folded in two places, which is understandable as that’s the most practical way to box them up, but when you unfold them it’s almost impossible to smooth out the permanent crease created by those original folds.
The second point isn’t really a negative as it’s just part of working with a thick foil like this – it’s extremely sharp!! You might want to consider using gloves when applying it, or just be really careful to use a roller or something other than your fingertips, especially when tucking down the edges of a sheet.
On the whole I’m very chuffed with the product and I’m planning to buy more to finish the whole project with this stuff.
I liked the size of sheets making it easier to measure and trim to fit difficult areas. I used it in my 49 Ford and it is a whole different world of quiet driving it now.
Hab die Matten im Sprinter verklebt. Diesen baue ich um. Da die groen Blech-Flchen doch einen unangenehmen Klang haben, wollte ich etwas dagegen machen. Das Ergebnis ist sehr zufrieden stellend. Hierbei kommt es natrlich auch auf das eigene Geschick an. Eine Rolle zum andrcken und fettfreie Oberflchen sind ein muss! Ohne wird das nichts.
Ich habe ca. 50%-60% der Flche beklebt. Rckblickend htten sicherlich die allgemein empfohlenen 40% locker gereicht. Das Alubutyl ist schwer genug um Schwingungen locker zu schlucken. Die Haftung scheint bisweilen sehr gut.
Great product. It really needs to be rolled out to adhere properly. It would be good if a roller was included in the order.
Super impressed by this product. Buy the roller will make install much better. Great value.
It does what the product says easy to use and value for money
Para un seat leon 1m necesitas 3 paquetes ojo q es mucho curro. El resultado es bueno.
Sheets where huge was able to do my whole roof with 5 sheets! Will deff be buying more in future this stuff is awesome
I have use other very expensive sound proof materials before and this stuff is equal to any of it.
Would suggest buying it for any project on a buget or no
Used it on my77 dodge b100. She went from sounding old and rickety van, as would be expected, now when you close the doors she sounds rock solid. This stuff really works!!! Super happy i didnt rip myself off with other products. Shipping was exeptionaly fast!
Buy the roll for easy install. Install plastic panel in the area where you dont want it to stick. Ex Handle mechanisms, speakers area.
Come in 6 folded sheets (6ft2 each) Cover properly 4 doors.
Ive never put sound deadening in a vehicle before. With no headliner anymore the road noise in my old Jeep ZJ Grand Cherokee made it hard to talk on the phone. I bought 36sqft planning to only do the roof. I only used 4 sheets on the roof and had 5 sheets left so i decided to do the doors too. WOW, what a difference it made in sound. Not only is my Jeep now as quiet if not quieter than my sedan, the music definitely sounds better. I’m planning to order more so i can do the rear hatch and as much of the floor pan as I can.
Wichtig ist hierbei die richtige Vorgehensweise, um die gewnschte Dmmwirkung zu erzielen.
Imm Paket liegt eine Anleitung bei, die den Vorgang nochmal erklrt und zeigt, worauf zu achten ist
Das Alubutyl tut was es soll und haftet gut am Trinnenblech. Den ersten Unterschied hrt man schon beim Klopfen der Tr von auen. Ich empfehle Arbeitshandschuhe beim Anbringen des Materials!
Since I decided to remove the stock wiring harness and install a new harness. It made sense to rip out all that terrible stock insulation. Every time I got under the dash it rained down crumbly insulation in my face. So happy it’s gone. I’ve never installed this kind of product before. So this was a bit of a learning curve. Test fitting several times before final installation. I like this product, although I haven’t fully tested it (my ride isn’t road worthy yet). It’s easy to cut with scissors and mould into tough spots.
I would recommend this product.
Die Verarbeitung war sehr leicht, selbst bei 10C Auentemperatur. Der Zuschnitt mit einem Cutter ist ebenfalls easy und sollte jeder hinbekommen.
Mich hat es berzeugt.
ottimo prodotto, ha un peso davvero elevato. Si adatta bene alle superfici, facilmente malleabile e tagliabile. Il prezzo elevato, ma comunque in linea con i prodotti di questo tipo, ed addirittura economico rispetto ad altri. Come isolamento fa un ottimo lavoro. Usato per isolare le portiere dell’auto, hanno migliorato di tantissimo la qualit delle casse, eliminando completamente vibrazioni di qualunque genere, ed esaltando davvero molto medie e basse frequenze. Sto valutando se comprarne un secondo pacco per insonorizzare il cielo ed il pavimento dell’auto.
Loved it! Wish it was a little cheaper here in Canada but other then the price… it’s excellent and made it much more quiet in my ca
Installed in my 1965 Chevrolet C20 truck and it works great. The adhesive backing works great and made it easy to install. I used a socket to roll it out and it forms to the shape of the floor or surface you are mounting it into. One of the values here is that you don’t have to cover the floor – just putting a piece on an area will make big difference in deadening the sound. Put it on the floor, back cabin wall, some on the firewall, and in the doors. I can now have a conversation while driving and actually hear the radio. This was a great investment.
Goes on easy and conforms well to any contours. Really deadened the hollow sound on my doors.
Good stuff done what I need it for and like good too
First time ive done a full scale sound dampening to my vehicle. This product was very easy to use. Installation was super simple. Comes in sheets that are so much easier to deal with than a roll. The pattern on the foil makes it impossible to miss any unpressed areas, so you know its on right. Im doing 100% coverage of doors floor cab roof and firewall so i need to order 2-3 more boxes but just after finishing my 2 front doors ive noticed a huge difference in how quiet it is now. Not to mention how much better my alpine door speakers sound as well! Definitely buying agai
Wow. Fantastic reduction in noise from the back of my van.
Choose this product over Dynamat as it was way more cost effective with similar results. This is my first time installing sound dampening material and it went really well. So far I have all my truck doors matted. I plan on doing my rear cab, headliner and my floor pans next. Product does have some weight to it so take the time and prep your metal property so you get the best adhesion. I didn’t notice any bad smell and it rolled on really well. My truck cab already has a noticeable difference as far as unwanted road noise and my oem stero sounds way better too. Overall I’d definitely buy again and I plan on getting more for my headliner.
Good product…. now the hot rod is done & is pretty quiet inside….. but didn’t quiet it down as much as I hoped!
Perfect for sound proofing at a fair price. Just remember 36 sq. ft. dose not go very far, so order more than you need.
Sticks very well, and seems to work nicely , used on my floor board , trans tunnel and rear wheel well. All on the inside of the car
“Brad Beauvais” on youtube if you want to see me install
Very easy to install and very effective on the Sprinter van walls. Mercedes put sound deadening on the ceiling and upper and lower walls but left it off the middle walls and wheel wells. This product was great to finish off what MB didn’t complete.
If I had one suggestion for the retailer is that you should sell in a smaller quantity. Even doing a large Sprinter van, I had lots left over. I have over half the box left and really no additional use for it. I will put around the SS sink once installed but that is minor.
Bei den aktuell winterlichen Temperaturen kann man das Zeug nicht mehr richtig ankleben, da lohnt sich die Matten vorher mit einem heiluftfhn zu erhitzen.
Ao far so good very easy to work with and aluminum is nice and thick
This isn’t a good or bad thing but just something to take note of it for planning purposes of coverage.
I am sound deadening my Toyota Tacoma and have been very happy with the material.
I bought a 2006 CTS-V that had some dynamat done in the trunk and under the rear seat. I bought this (half the price), and it looks, feel, acts, smells, and sound deadens just like dynamat. I filled some gaps the previous owner left in the trunk and under rear seat, then also did the rear wheel wells, and it made a very noticeable difference in sound level in the cabin. I don’t believe there’s any difference between this and dynamat, but this is also my first time using these products. I highly recommend this for a big $$$ savings. And I’m not being paid by anyone and I don’t work for any of these companies ;).
I did four doors in my car. It was noticeably quieter. Almost 3dB…. and, way cheaper than a certain other brand yet it feels the same, is spec’d about the same and way cheaper!
I’ve fitted it to nearly all the panels on my van and backed it with an MLV closed-cell mat. My van is now as quiet as my old 2016 Mini!
The fitting can be difficult but as this is a percentage covered type product you can slice and cut shapes as you wish to cover those difficult to reach places. A good roller is a must!
A few additional points, I compared loads of similar products on the market and this by far offers the best bang for buck. It does make a difference to the thermal insulation of the vehicle, the temperature changes less often now and also if you place it near speakers it will dramatically improve you stereo, on my transit custom I use to run with the bass at +6, I know run it at -1!!!
I think at this point I have bought four boxes and I couldn’t be happier! 5/5 product!
Die Noppenstruktur der Alu-Folie ist sehr hilfreich beim Verkleben mehrer Stcke bzw. grerer Flchen, da man daduch perfekt sieht, wo man mit dem Andruckroller bereits war und wo noch nicht.
Ich wrde diese Dmmatten zur Dmmung des nchsten Autos jederzeit wieder kaufen.
I purchased this sound proofing material from Silencom EU to reduce the sound of my vehicle coming up through the floor and side of the doors and to improve the sound from the speakers. I initially ordered this product and it was going to come the specific day that the delivery was scheduled however after waiting all day it did not arrive and I could not use the product for which it was intended due to it not coming, this very upset me and made a considerable inconvenience timetable.
However, the company was quick to resolve the situation, so I give them top marks for that and the material itself was expensive to the touch I was much relived at the quality. It was heavy to move around and looks of a premium nature.
Overall it’s made a huge improvement to the engine noise levels in the car. The doors now shut with a reassuring thud rather than a clatter and the speakers sound great.
It can potentially be a big job depending on how far you go but well worth it. I can thoroughly recommend this product especially as it’s nearly half the price of some others.
This stuff is wonderful. After laying what I felt was plenty of this stuff in my (interior down to the metal) 2015 Ford Fusion, I tossed my seat in the car and started driving around with ZERO. It sounded better than it did with the interior in it. I was so impressed that I ordered more. I’m gonna put as much as I can until it sounds like a Lexus. Then, when my box get’s here for my new HDX3 12’s, I’m also going to see if it will still to clean birchwood. If it will, I’ll lay it double thick on the inside of my box as well. DynaWho?
Used it to to quiet down my fox mustang covered the entire floor ,made a huge difference car even feels sturdier driving would recommend this product.
Product as described, have not finished the installation yet, but good so far. Won’t know about the sound deadening until I am finished the total installation. Pleased with the product, expect good results.
Non sporca e non ha odori spiccati, almeno alle temperature che normalmente ci sono nell’abitacolo di un’auto. L’effetto insonorizzante proporzionale alla massa di materiale che si riesce ad applicare alle superfici.
Product did come in sheets, not a roll, and frankly I wouldn’t want it any other way. Anyhow, hopes this helps someone.
I bought this to line the floor of an older car. I had some leftover Dynamat that I started with and finished the job with this product. I found the adhesive to be a bit better on the Dynamat and the Dynamat was also a bit thicker. When installing the Dynamat I had to be very careful, as once it was touched to the metal surface, it was stuck. I found that this could be peeled up and moved. Not a problem if doing car floors. Since this product is about half the price of the Dynamat it rate it as a good value. But when it comes time to line vertical and overhead surfaces in my car I’m going back to the more expensive product. I’m just not sure I trust the adhesive to hold in those applications.
Great product to remove all the rattles in my car doors.
Used this in my 2018 MX5 RF GT and what a difference! A whole new car!
Arrived as expected. Easy to cut and put in place. Used to dampen furnace fan noise. Seems to do what I hoped. Adhesive backing stuck well to ductwork.
So far so good. Have not started application because I live in BC lol. The initial inspection I feel I will really be happy with this product.
Way more than what i needed but very good quality
I highly recommend this product. I purchased it to help quieten the ride in my Promaster hightop extended length cargo van that I am building out as a camper to travel in. I kept it stored inside in the warm while I worked out in the cold van, and it really helped to keep the product pliable and easy to cut. Covered the cut edges with metal tape. Rolled it out as per directions , the diamond pattern that flattens as you do so makes it easy to see when you have rolled enough. The noise difference before and after is impressive. Would definitely use again, and the second day delivery from Amazon was appreciated.
very good product, good adhesion, it helps reduce vibration noise in my Subaru Outback enough to make it more than comfortable. Enough product to cover cargo area, rear under seat and both front doors and i still had material lef
The price is purfect for the quality it doesn’t handel heat very well but it works good in cool body panels and trunk lids
Was an easy product to use, make sure you have gloves because it cuts you easy. I used it in the Cab of my 78 Chev C10 Pickup, had two sheets left over. Made a huge difference in the noise level inside the cab.
Used it as deadening inside door shells and its really good. Bang for the Buck
great price. fast shipping. fairly easy to install. the difference from before using it is huge
This stuff is easy to apply, and once in stays where want. Excellent sound deadening and heat sheild. You get a lot of material for the money.
completed the inside of a 65 impala and it reduced the noise considerably, would differently buy again.
the diamond pattern make it easy to determine if it is installed correctly. For cost great price, easy to work with, keeps contours and cuts easy, leave it in the sun makes it work easier.
Works really well, BIG improvement in noise level in my classic cruiser boat.
Fantastic!! this product conforms beautifully to all the contours in the cockpit of my Corvette and it does a great job!! I am going to buy more to complete the job professionally.
It absorbs sound really well once it’s taped all around the car. I find I just need around 25%-33% coverage in my sprinter.
This product works very well to eliminate buzzing and rattling of panels caused by the 12 inch subwoofer in my truck. I initially bought this to reduce the tire noise from the loud mud terrain tires. The product did an alright job after covering the 4 doors entirely and the floor pan beneath the floor mats of the front seats. I was able to cover all 4 doors of a crew cab silverado with 6 of the 9 sheets provided. The ride is noticeably quieter, but slightly less so than I initially expected. In hind sight. I would get MLV rather than this for sound deadening if tire noise is the main concern. If eliminating buzzing of panels from a sub is the goal, then this is the product to get. Very easy to install, has withstood a summer in 100 degree texas heat with no smell or peeling.
This item was by far better at stopping noise than the other mats was heavier than I thought but that was what I wanted now I’m the loudest car on the block without the vibration thanks
Super quality, i have not installed but have used the brand name products before; this looks, feels superio
Really liked this product. Never used the premium brands so cant compare.
Not hard to work with. Foil remained intact. More difficult putting the damn panels back on than applying this stuff. Will buy again.
Super easy to install, utility knife and a roller. Extremely sticky, moulded very well to my door profile, even conformed to the contours without ripping. It was about 10 C outside when I installed it, which is a bit low for butyl and it still went on with ease. I was suspect buying it given the comparable price of “branded” products but upon using it I couldn’t be more pleased. More will be in the shopping cart soon!!
This is exactly like the other rubberized asphalt sound deadening products but it is a fraction of the price. Buy it.
Having used several different brands to do the floor, doors, rear deck, trunk, and spare tire well, this is by far the least expensive but is exactly the same as the others that cost several times more.
*PRO TIP: When you apply it to clean, degreased bare metal, run a heat gun over it to soften it up and then use a roller to press it down further to ensure good adherence. My car has seen several years of high summer heat in the Southern US since installing similar products and using this method, they held up and did not melt. No doubt this will hold up too.
PROS:
-great value for your money
-easy to install
-made a huge difference in my interior sound
-only 1 layer is required
-strong adhesive
-nice and thick
-very moldable
-came well packaged
-fast shipping
-absolutely no smell
CONS:
-I really don’t see how you can go wrong with this product over the competitors at 10x the cost
-wish you could buy more bulk sizes
-aluminum foil cover will rip if you use a roller too hard on it
The before and after interior sound quality is amazing. I’m going to order another package of this to finish under my front seats and complete the truck. All the areas smoothed out really well as the summer weather warmed up the cab. No chemical smells whatsoever after a few weeks.
TIP: Use aluminum tape to seal between edges and help fill gaps.
I wS worried about the thickness curse of other reviewers….those must be haters. Every bit as good a the “other dyna whatever ” stuff.
Started with the 36 sq ft in the trunk and doors of my 300m for sound improve the after upgrading to audiophile speakers and amps etc.
While this was sufficient for aiding the sound, I was in love with this product…..I wanted all out coverage….to quiet my cabin like a Bentley…or close to it.
So I ordered 2 more 36 sq ft kits, did under the hood, fire wall, rear doors, along the floor boards near the rocker panels, the floor boards, inside the center console assembly, the glove box and other reachable IP frames and supports. I also did the inner roof, pillars, shock towers, and my favorite new trick….on the back of my license plate…..and my girl friends, and mothers, and fathers…etc.
Seriously the most underage use for butyl sound deadening mat. Your loud a$$ license plate!
I now have 5 Noctua fans in the compartment and I have to put my ear up to the wall to tell if they’re on or not.
This stuff is very easy to work with and I didn’t notice any odor. It’s also very reasonably priced compared to most soundproofing material.
One word of warning, the adhesive is very hard to clean up and when you pull off the paper backing, some of it will stick to the backing. If you drop the backing on the carpet and step on it, it’s pretty tough to remove (don’t ask me how I know).
Be aware that this stuff is heavy and will add some weight to whatever you stick it to.
I only wish they sold it in smaller amounts. I could use a sheet or two more of it but don’t want to buy 6 sheets again.