Shappy 3 Pack Security Wall Mount Indoor and Outdoor Mount Bracket Adjustable for Wyze Cam Pan 1080p Pan, Arlo Pro 2, Arlo Pro, Arlo, Arlo Cam and Other Compatible Models (Black)




Dimensions: 9 x 6.8 x 6.8 cm; 138 Grams
Model: SCNEW-00673
Manufacture: Shappy

163 Responses

  1. Anonymous says:

     Germany

    Kunststoff sieht auf den ersten blick billig aus ist es aber garnicht. Gute montage ud einstellmglichkeiten.

  2. Venetta2222 says:

     Germany

    These are perfect for my webcam (c920). The thread size is perfect fit, no adaptor necessary. Range of movement once mountes is great! My webcams are light so they don’t put much stress on these brackets but they seem sturdy and up for the challenge! Highly recommend!

    These are perfect for my webcam (c920). The thread size is perfect fit, no adaptor necessary. Range of movement once mountes is great! My webcams are light so they don't put much stress on these brackets but they seem sturdy and up for the challenge! Highly recommend!

  3. Anonymous says:

     United Kingdom

    These are brilliant quality and my camera fits perfectly on the screw. Worth the price and definitely recommend them.

  4. Anonymous says:

     Italy

    Ottimi, sia per qualit che per il prezzo pagato. Data l’attacco standard posson essere usati per sotenere molteplici dipositivi, nel mio caso il sensore vento netatmo sul muro del terrazzo e la videocamera nel box auto. Consiglio l’acquisto

  5. Anonymous says:

     Italy

    Ho acquistato questi supporti, dovendo montare l’articolo “LEICKE Pannello Solare per EZVIZ C3A” (acquistato a parte). Infatti, il cavo di alimentazione del pannello solare, una volta collegato alla webcam, non consente un’inclinazione molto bassa della telecamera stessa, poich il supporto in dotazione della Ezviz, lascia la webcam troppo vicina al muro. Con questi supporti ho risolto egregiamente. L’unica accortezza che raccomando quella di stringere molto forte il bullone che regola l’inclinazione della telecamera, in quanto, essendo la Ezviz C3A molto pesante, tende a far abbassare in avanti il supporto. Per il resto perfetti

  6. ElijahHorrocks says:

     United Kingdom

    Excellent brackets just what I need for a job that was pending.
    The brackets are strong and do the job well. Great buy will buy this again.

  7. Anonymous says:

     United Kingdom

    Simple and easy to put in place. Strong enough for a webcam not sure about a larger DSLR camera. Pack of three mounts at a good price.

  8. Anonymous says:

     United Kingdom

    Simple, neat and easy to put up securely with good fittings. Good range of movement for camera. It’s plastic and lightweight so for indoor lightweight CCTVs not heavy metal external CCTVs . Very pleased for my purposes . I am using Victure PC 530 cameras and they fit perfectly.

  9. Guiller6733 says:

     United Kingdom

    I used them to hang some small led camera lights from my ceiling to light a green screen and the are ideal for that.

    The fit and normal camera mou

  10. Sue Byrne says:

     United Kingdom

    Bought to ‘ceiling’ mount this for use with a portable projector. I’ve mounted this to the backside of my exposed beam to screw in the nebula capsual max projector. Works well and feels stable enough. The body of the mount is plastic so I was a little hesitant at first to attach such an expensive and heavy item. I’ve used it a few times now and seems to do the job. With 3 of them costing less than 10 I can mount others in other rooms but still cautious everything I use it in case the plastic deteriorates.

    Easy to install and suitable for my need

  11. Anonymous says:

     United Kingdom

    Great I fitted 3 cameras, brackets are well made and great quality and value for the money.

  12. Anonymous says:

     Germany

    Ich habe eine Deckenhalterung fr Videolichter mit 1/4Zoll Gewinde gesucht. Was soll ich sagen: Gesucht, gefunden, ausprobiert, gleich noch weitere drei bestellt. Ich hatte bedenken das sie ein Videolicht vom Gewicht nicht halten wrden, wrde allerdings positiv berrascht. Einmal festgezogen bleiben sie perfekt in Position, auch bei steilem Winkel entgegen der Schwerkraft. Fr den Preis kann man sich nicht gro beklagen, allerdings ist die Verarbeitungsqualitt doch etwas mau. Bei einer Halterung aus Bestellung 1 lie sich die Anziehschraube kaum drehen. Also fr Festinstallation – wie eben bei einer berwachungskamera – top, da man dort nicht gro dran rttelt. Videolichter: Nur wenn sie einmal eingestellt werden und danach eigentlich nicht wieder angefasst werden sollen. Stndiges verstellen, Montage und wieder abnehmen ist sicher nicht die beste Idee. Eine DSLR mit Magic Arm ist brigens definitiv zu schwer… Auer ihr arbeitet im Kugelgelenk mit etwas Patex kleben statt bohren. Dann knnte es womglich gegen. Aber das Zeug hlt eh Alles. Info: Ich habe natrlich keine groen Videolichter daran befestigt (Neewer T120).

  13. Anonymous says:

     Italy 🇮🇹

    Utilizzati per telecamere esterne SRI Home: perfettamente compatibili ne permettono una migliore regolazione della posizione sui 3 assi

  14. considerthesauce says:

     Germany 🇩🇪

    Preis Leistung passt. Hlt bomben fest und ist fr das Geld super geeigne

  15. Anonymous says:

     United Kingdom

    Look decent once installed, used them to mount Valve Index base stations.

    Subtle look to them which I like. Made of plastic, don’t feel mega sturdy but do the job.

    Can be difficult to twist the collar hard enough to tightly lock the mounts in place.

  16. Anonymous says:

     Germany

    Ich habe damit meine Oculus sensor-Kameras aufgehangen und sie tun exakt was sie sollen. Der Kunststoff fhlt sich etwas ‘billig’ an von der Oberflche her, ist aber massiv genug dass ich mir keine Sorgen mache dass da was auseinanderbricht.

  17. Anonymous says:

     United Kingdom

    Used to attach camera to planter in garden..as the last camera was stolen by a fox!!

  18. Anonymous says:

     United Kingdom

    Perfect to secure the cameras a bit better than the magnets supplied. Better peace of mind for us that they can be removed so easily.

  19. Anonymous says:

     United Kingdom

    Easy to install, I used there on my Eufy 2c Camera works grea

  20. MaribelLockyer says:

     United Kingdom

    Ideal for light weight cameras etc. Good value for money.

  21. JudithMUAuwu says:

     United Kingdom

    Very basic and the it’s the sort of plastic that will shatter if you were to over tighten. But it does the job it’s meant to do and does it well enough

  22. SherrilCintron says:

     United Kingdom

    Purchased to mount my sensors from the roof, and they are perfect.

  23. JannieV44ypb says:

     Germany

    well enough made,good price and worked great for my oculus sensors

  24. Anonymous says:

     United Kingdom

    Use for Rift sensors so can attach them to the ceiling.

  25. Anonymous says:

     United Kingdom

    Fantastic…works well on moobox pro xt external cameras 3 for 8. A lot better than the moobox mount which costs 10…very happy indeed and 2 spare for backup…

  26. Anonymous says:

     United Kingdom

    Myself and my husband love these there perfect for positioning cameras for recording videos. We use them indoors

  27. KathariLHGD says:

     Italy

    mi serviva cambiare i supporti di alcune telecamere e sono risultati come prodotto migliori di quelli che sono usciti a corredo delle stesse. le ricomprer sicuramente dato che a breve installer altre videocamere. le consiglio

  28. Anonymous says:

     Germany

    Bin sehr zufrieden und verwende sie im Revier fr die Wildkameras

  29. XBVRaphael says:

     United Kingdom

    They seem a little cheap with the plastic but I haven’t seen anything that overly worries me about it. I trust it with my 130 Vive lighthouses

    Clean looking product unlike my room XD

  30. Joe Van Brussel says:

     Italy 🇮🇹

    Struttura leggera ma robusta.Prodotto valido. Consegna veloce . Consiglio sia il prodotto che il venditore.

  31. Anonymous says:

     Italy

    Staffe fantastiche!!!… Le ho utilizzate per posizionare i sensori di Oculus Rift CV1 intorno alla stanza dove gioco. Totalmente orientabili, assolutamente poco invasive e gradevoli da vedere. La regolazione avviene tramite una ghiera rorante e permette il posizionamento millimetrico dei sensori con la massima facilit. Si installano a muro con 3 fisher ma considerando la leggerezza dei sensorini dell’ Oculus Rift, anche con 2 si regge perfettamente. Suggerisco caldamente a chiunque abbia la necessit di posizionare a muro i sensori del RIFT ma ovviamente vanno benissimo anche per sostenere altre tipologie di apparecchi tipo telecamerine e sensori . Spero che dalle foto si riesca a percepire l’eleganza e la poca invasivit degli stessi. Sperando di esservi stato utile vi saluto, ciao.

    OTTIMO ACQUISTO

  32. Anonymous says:

     United Kingdom

    Bought these for wall mounting the sensors for the oculus rift. Very easy to install, comes with all screws and wall plugs. Holds the sensors well and easily adjustable

  33. skypexj says:

     United Kingdom

    I used these to mount two oculus wall sensors and it worked perfectly in combination with the amazon basics super long USB cables.

  34. Anonymous says:

     France

    J’ai achet ce produit pour tester le fait de monter mes CAPTEURS OCULUS RIFT dessus.
    Cela fonctionne parfaitement.
    Le produit semble fragile mais en prenant soin de ne pas forcer le montage des capteurs,
    et une fois fix aux murs, il n ‘ y a aucune raison de russir les casser.
    Bref, TOP ! Merci.

  35. Anonymous says:

     United Kingdom

    With little over 50% five star ratings, and many adverse comments indicating that these camera mounts were of poor quality, were not fit for purpose, didn’t fit the camera or hold it securely, broke easily because they are mainly plastic, came with screws that didn’t fit, etc. I almost didn’t buy them. But a lot of the reviews do not do them justice.

    I didn’t want to spend a lot in case they didn’t work for me, as I hoped they would but, but I took a chance on them because they were cheap. I took on board many of the comments about such things as over tightening them, and ignored many others.. and I’m very glad I did, because they are great. I wanted to raise a camera on my windowsill by about 3″ so I could view my dogs in their bed, over the top of the sofa, when I’m not at home. I also wanted to raise a 10″ TV in the kitchen, off the top of the microwave in case the heat damaged it.

    I’m pleased to say that the mounts do exactly what I wanted them to, and I haven’t had any problems with them. They come with screws (perfect for securing to the bases to a windowsill) and rawl plugs for wall fixing (I have more cameras in other rooms). I cannot screw the base of a mount to the microwave, and I was afraid that the TV would be a bit heavy for it and overbalance, but I need not have worried as it’s fine.

    Either the people who gave these mounts poor reviews were too heavy handed with them, or the product has been improved since many of the reviews were written, but I like them so much that I keep meaning to buy another set – in black – so I can change the one on the TV, and put one on a black IP camera. Great value for money.

    Perfect. Exactly what I wanted.

  36. Lindsay Miller says:

     United Kingdom

    Used for valve vr lighthouses. A bit cheap looking but can’t really be seen once the lighthouse/camera is attached. Seem sturdy enough and we’re easy to install. Thin plastic so be careful not to overtighten the screws.

  37. [email protected] Lindsey Dunn says:

     Italy 🇮🇹

    Sostituzione per le mie ip Cam perfetta. Essendo la base di plastica evitare l’istallazione esterna direttamente sotto il sole.

  38. Anonymous says:

     Germany

    Habe dieses Produkt fr meine Sensoren fr die Oculus Rift gekauft. Soweit sind sie i.O. aber leider ist bei der Feststellschraube fr den Neigungswinkel nicht ganz so wie es sein soll, weil sobald man den Winkel einstellt lst sich die Feststellschraube wieder und der Neigungswinkel verndert sich, die ganze Halterung ist von der Qualitt nicht besonders aber fr den Preis ganz OK. Habe die Schraube mit LocTite (Schraubensicherung) befestigt.
    Fazit: Sofern man keine Schwere Objekte befestigen will oder der Winkel muss nicht 100%ig sein, dann tut die Halterung ihren zweck, ansonsten habt ihr kein Spa zum Einstellen.

  39. Kelly Tyko says:

     Germany

    They come with the right screw so that it’s easy to mount them. Easy to use them, approved.

  40. FerdinaFranklin says:

     Italy

    Si adattano molto bene alle telecamere arlo pro. Unico difetto forse nelle plastiche un po’ leggere che no permettono una buona stretta dello snodo sferico di metallo. Tuttavia per ora non danno problemi.

  41. Anonymous says:

     Italy

    Ottime telecamere. Facile il montaggio.
    Su una le batterie per…sono al 30%,e non va bene.

  42. Anonymous says:

     United Kingdom

    Good for the price. The biggest issues for me are firstly it is difficult to tighten them up enough to hold the camera in position, and secondly after 7 or 8 months or so of outdoor use, the metal parts are starting to corrode.

    The body of these mounts are plastic so are not as robust as the official Arlo ones which are metal.

  43. LisetteM74 says:

     Italy

    Accessorio comodissimo per applicare le telecamere in posizioni anguste dov’ la semisfera 9n dotazione non di facile utilizzo. Robuste e comode sono delle estensioni davvero utili e semplici da installare.

  44. Anonymous says:

     United States 🇺🇸

    very pleased. just like the ones you pay more money for. if I need more will definately buy agai

  45. Anonymous says:

     Italy 🇮🇹

    Prodotto commerciale che si adatta ottimamente alle arlo, buona tenuta!

  46. MickeyH25lsd says:

     France 🇫🇷

    Supports achets pour fixer des capteurs Oculus Rift au mur, parfait.

  47. Anonymous says:

     United Kingdom

    Great substitute for the Arlo brackets-sturdy and robust & great value.

  48. Anonymous says:

     United Kingdom

    These little cameras have fantastic picture quality the only down side is the motion detector hasn’t got a wide enough range

  49. Leonie Barrie says:

     United Kingdom

    Used to mount my Oculus Rift sensors on the wall, easy to install and nice and sturdy.

  50. Anonymous says:

     United Kingdom

    Excellent quality and brilliant brackets and very cheap and very good

  51. Olga8308pmjqid says:

     United Kingdom

    Easy to install and set up, and very use to use. I suggest setting up a geofence area to save on battery power.

  52. MollyZimmer says:

     France

    Idal pour fixer vos camras dfinitivement et viter que celles ci s’enlvent trop facileme

  53. Anonymous says:

     United Kingdom

    These are fine and do the job, not sure how heavy a camera they woudl hold but would hold most or all webcams.

  54. ElmerBateson says:

     United Kingdom

    Does what is said, I have used them for the htc vive boxes

  55. JeanettRosenhai says:

     France

    Utiliss pour les camras d’un Oculus Rift.
    Remplissent parfaitement leur rle.
    La qualit est moyenne, mais le rapport qualit prix est correc

    Pratiques

  56. Steve Boxer says:

     Germany

    Golden Review Award: 2 From Our UsersWerden als Halterungen fr meine Netatmo Wetter-Messgerte eingesetzt. Die Gre ist gerade so ausreichend.
    Fr den Preis ok, auch wenn der Kunststoff nicht gerade einen hochwertigen Eindruck hinterlsst…

  57. Danielle Kosecki says:

     United Kingdom

    Better than the magnet holder supplied by arlo
    Easy to adjust to correct angle

  58. Anonymous says:

     Italy

    semplici si adatta benissimo alla mia videocamera arrivati in in modo ultra veloce

  59. Ramya V says:

     United Kingdom

    My son installed them for me, he advised me to buy them for our new home, he has same product and the app and cameras was easy to install, good quality day and night vision, would recommend

  60. ife says:

     United Kingdom

    Used these as ceiling mounts for the Oculus Rift sensors so the fact that they have rotational adjustment meant we could easily optimise their positioning for the best coverage of the room.

  61. FrederickaLanni says:

     United Kingdom

    Cheap and cheerful, you get what you pay for, it did the job, which in my case was to secure oculus rift sensors to my office wall. I would be careful not to tighten screws too much as they are made from plastic and may crack if you do over tighten.

  62. Anonymous says:

     United Kingdom

    Used for mounting Oculus Rift sensors to my wall only have 2 so I have a spare mount for when one of these breaks due to the flimsiness offs the plastic. Mounting hardware included was nice. Does a good job of clearing up my desk and making the coverage better.

  63. Anonymous says:

     United Kingdom

    Bought to fix my Oculus Rift sensors to the wall for a permanent fixing. These work well and the rift sensor heads screw onto them with ease