Wera Click-Torque XP 4 pre-set (adjustable) torque wrench, 14x18mm drive, 20-250 Nm, 05075673001

Wera Click-Torque XP 4 pre-set (adjustable) torque wrench, 14x18mm drive, 20-250 Nm, 05075673001

Wera Click-Torque pre-set (adjustable) wrench, the perfect choice for all bolting applications where the same torque and repeat accuracy is required.

Click-Torque pre-set wrench in unmistakable, robust Wera design, with an ergonomic two component handle, for superior comfort and grip. Delivered pre-set at lowest torque value in the range (20Nm), this can be adjusted however in three simple steps.

1. Remove the cap at the top of the handle. 2. Use narrow pliers to remove the protective sleeve. 3. Finally use a 5-mm hex-key to turn the setscrew. Clockwise rotations will increase the torque value and counter clockwise rotations will decrease the torque value. The actual torque value must then be checked with a suitable testing device, after adjustment replace the protective sleeve and the handle cap (We do strongly recommend having the torque setting done via our Wera torque service).

For accurate measurement results operate the torque wrench with the hand placed in the middle of the handle; when the pre-set torque value is reached, an audible and tactile release mechanism will trigger preventing any chance of you overtightening the desire torque value.

Exactly precise to ± 2% (as per DIN EN ISO 67892:2017-07), for accurate clockwise and anti-clockwise torque-controlled tightening. 14×18 mm drive for interchangeable insert tools. Measuring range: 20-250 Nm.

Contents

Click-Torque XP Click-Torque XP torque wrenches are provided with pre-set torque values. These torque wrenches are ideal where the same torque value and repeat accuracy is required.	For Insert Tools 14x18mm square drive, suitable for interchangeable insert tools.	Accuracy Exactly precise to ± 2% (as per DIN EN ISO 67892:2017-07), for accurate clockwise and anti-clockwise torque-controlled tightening.	Suitable for both directions Click-Torque wrenches for insert tools are suitable for both left-hand and right-hand threads.