ELEGOO Mercury X Bundle with Separate Washing Station and Curing Station for Large Resin 3D Prints, Compatible with ELEGOO Saturn, Mars Series mSLA 3D Printers
ELEGOO MERCURY X Bundled Washing and Curing Machine
After the model is printed, please clean and blow-dry the model before putting it into the curing machine.
If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model.
The recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.
Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
———
Our Commitment ：If you have any questions or are not satisfied or need an use guide, please feel free to let us know，ELEGOO Official Service team will answer your questions within 24 hours. please send us via email or click “Ask the ELEGOO”
Your satisfaction is our goalï¼
The only limitation is your imagination. Print now and go with ELEGOO.
——-
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Official ELEGOO Support | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Dimensions: | 32 x 30 x 48 cm; 5.8 Kilograms |
| Manufacture: | ELEGOO |
| Dimensions: | 32 x 30 x 48 cm; 5.8 Kilograms |
| Origin: | China |
| Reference: | EL-3D-MXB |
Easy to use and very good quality.
Makes cleaning & curing so much easier and less messy.
works fine but wont fit big parts or prints better suited to minis
If you buy a resin printer you will need one to clean and cure your prints, nice and easy to use.
Fantastic item to use .. great value a must for any resin 3d printe
So I bought this at the same time ad my printer because I was feeling flush, I cannot tell you how glad I am because the process of printing and curing resin prints without it would have put me off bothering. The build quality is good not the best but it works perfectly every time, and it really does improve the print details.
I only bought this in March and the drive mechanism rotor wheel boss is already broken. not really impressed
A very nice product and very easy to install and use. Super fast delivery ! very recommended.
I have a resin printer and just accepted that mess was a part of the process. How wrong was I! With this wash and cure station the process is so much easier. When the print ends just take the build plate and print and put it in the basket. The liquid is then washed around the model cleaning it perfectly. Then you pop the model off the build plate, change the wash station to the curing plate pop it back in for a couple of minutes. Perfect model with no (or very little mess). Love it!
Well packaged, easy to set up and use! There’s a slight lack of information on how long to use the wash or cure settings but there are plenty of videos and info online.
I was thinking about this bundle for a week, it is not cheap. I am very happy I bought it. It does help with everything if you do resin printing. You just did print something, remove it from the plate, wash it, you got some resin on build plate? Wash it the easy way. At the end, you cure your prints in it as well.
I got my ELEGOO Mars 2 Mono in December and did my first prints. One thing that became clear very quick, was the fact that the washing was a mission and also created a huge mess. It almost put me off 3D printing. I had seen these wash stations on other artists videos and did some more research and took a chance and got one. BEST DECISION EVER!!!!! No mess, no fuss and the results are so good. Super simple to use which gives me more time to focus on the 3D side of things.
Having the wash and the cure in one machine is really awesome. It doesn’t take up a lot of space and is such a power house for me to bring my prints up to that high quality standard.
Without this machine I would have probably gave up on 3D printing or maybe just done 1 print ever now and then but, because its so good i am printing daily. Super happy i pulled the trigger and got one 🙂
Elegoo has yet again not only come up with a great product for resin 3D printing, but 2 products. They have then combined them into a great value for money bundle at an amazing price. These products have improved my resin printing experience so much better. These products make for a cleaner, more efficient and tidy clean up. They also have improved the finished product with a quicker and more efficient curing system. Making your prints strong and longer lasting.
Prior to buying this set-up, like many others i washing prints in whatever container i had lying around, trying to cure prints with a home made UV set up. Not knowing if UV light was too strong, not strong enough, was i curing for too long, not long enough. All that guess work is gone. Yes you can still tweek things here and there with regards to how long you cure for. But the process is a lot easier to do, and best of all a hell of a lot tidier. Buy this product, you won’t be dissapointed.
The other great thing about this and all ELegoo products… the people at Elegoo customer service. Very responsive, very helpful and very knowledgable.
This kit makes life so much easier and speeds up your workflow so much. Definitely worth it if you 3D print a lot and I’m very happy with the quality of the kit.
Extremely well packed, both items worked perfectly. One small gripe, the screws to secure the upright UV lights are very small and were a bit fiddly but you get spares so overall not really an issue.
Great product, easy to use and the customer service is great. Wouldn’t hesitate to buy more products from elegoo
I purchased this to go along with my Elegoo Mars pro over 6 months ago and was very satisfied. As someone new to SLA printing, having this compact and tidy station for post processing made it a much simpler undertaking. Now with a bit more experience i would recommend it to anyone looking to get a SLA printer, even now with more confidence it just makes the whole process quicker and cleaner.
Excellent quality and makes life so much easier than washing manually and waiting hours to cure
Speeds up the whole cleaning and curing process, built in turntable for curing it is a nice tidy machine
We’re still new to 3D printing having only bought our Elegoo Mars 2 and this wash/cure machine in the last few days.
It certainly seems to wash prints well when placed in the basket lowered into the washing “bucket” which features a rotating agitator. I think the agitator changes direction every 30 seconds.
We’ve only created few small prints so far, and I notice that although you can wash whilst the object is still on the build plate, the mounting bracket provided to support the plate assembly doesn’t let it lower more than half way into the bucket – meaning that we probably need to add more cleaning IPA than the 1 litre I bought (the bucket takes up to 3 litres). The bucket is supplied with a lid which seals with clips, I’m not totally confident that these clips will survive many repetitions of open/close.
The curing process seems to work well, with the object placed on a turntable.
The unit has a safety feature preventing it from operating in either mode without the lid in place.
We’re still new to 3D printing having only bought our Elegoo Mars 2 and this wash/cure machine in the last few days.
It certainly seems to wash prints well when placed in the basket lowered into the washing “bucket” which features a rotating agitator. I think the agitator changes direction every 30 seconds.
We’ve only created few small prints so far, and I notice that although you can wash whilst the object is still on the build plate, the mounting bracket provided to support the plate assembly doesn’t let it lower more than half way into the bucket – meaning that we probably need to add more cleaning IPA than the 1 litre I bought (the bucket takes up to 3 litres). The bucket is supplied with a lid which seals with clips, I’m not totally confident that these clips will survive many repetitions of open/close.
The curing process seems to work well, with the object placed on a turntable.
The unit has a safety feature preventing it from operating in either mode without the lid in place.
I am relatively new to the world of 3D printing, but since I started my Elegoo Mercury Plus has been a constantly reliable stable-mate with my Elegoo Mars Pro.
I use Elegoo grey Water Washable polymer resin and find that the process of printing and then washing and curing, not only seamless, but also strangely therapeutic too!
The Elegoo Mercury Plus is ideal for beginners and experienced creatives alike. It’s economical and sits proudly next to my 3D printer.
eally great tool to help with cleaning and curing your resin print. yes you can do without if you need to but this makes it so quick and simple why would you want to do without.
Washing and curing prints was always my last favourite part of resin printing… Not any more. The wash station makes the job so much easier and less messy. I can transfer the whole build plate into the tub and wash it… Can’t recommend ebough
What a great bit of kit! Easy to use and really good quality clean for your prints. And a fast cure. Very very happy
my review is if you havent got one buy it now god send
makes resin printing much cleaner and injoyable i would be lost with
this now and the price as allways be good .the count down timers for the uv light and wash
are great can be set up to a good 15 min parts come out clean in ipa ..it would be great if you could locally
get more plastic containers to put diffrent liqards into ..but well tested a honest review.its amust these days when you buy a resin printer..
Bought this and the green machine for a present. Recipient reports they work really well. Had an issue with the motherboard, tech support were responsive, helpful and sent a replacement board out within 2 days of us contacting them. Really impressed.
Bought this and the green machine for a present. Recipient reports they work really well. Had an issue with the motherboard, tech support were responsive, helpful and sent a replacement board out within 2 days of us contacting them. Really impressed.
Amazon prime day is a great way for you to explore more of your interests and hobbies (at least that’s what I think) and this year was no exception with the purchase of the Elegoo Mars 2 Pro and the Elegoo Mercury 2 in 1 wash station.
I’ve previously been using an FDM 3D printer for the last year and with it has come a lot of frustration and learning, but after having recently viewed a number of reviews on resin 3D printing on YouTube I thought why not give it a try. And so far I have not been disappointed. Resin printing has a totally new workflow to it compared to normal filament printing but once you get used to it, its worth the extra steps. The Elegoo products are well made and so far (touch wood) I have had no major issues, so would recommend their products to anyone wanting to get in to this new world of 3D printing.
Key Points & Recommendations –
– I purchased the Elegoo water wash resin to save money on IPA and so far the print quality has been great
– Purchase and install a flex plate it makes removal of the print so much easier
Customer Service – Exceptional service and quick turn around – plus a bottle of resin as compensation
Since being delivered there has only been one fault which was a large scratch on the yellow shroud which comes with the Mercury wash and cure station. While this doesn’t affect the operation of the machine, I was slightly disappointed that it was sent out like this. After having contacted Elegoo customer services I can say that they offer exceptional service and have now offered to replace the shroud and also send me a bottle of resin as compensation. All I can say is that this is great customer service and would recommend them to anyone looking to buy their product.
I could not imagine going back to doing all my resin cleang by hand.
Using the wash & curing station has made this hobby at least for me far more cleaner / safe and more pleasurable.
Love it! Washing and curing is so easy with this. It’s a great size and honestly can’t complain. Bit pricey but more than worth it for the ease
A simple and user friendly wash and cure station, equipped with either basket for released models to dip, or a bracket to hang the printing platform from.
Does what it says, without the normal mess if you’re doing it manually. I wish there was a way you could buy a 2nd tub for the cleaning but overall well worth the money. Pleased with it loads.
Super easy to use land very intuitive. Curing takes just a couple of minutes. It doesn’t come with the IPA but tbf it’s a relatively cheap piece of kit considering it works so well.
The design of the machine is amazing but and it washes my models well and with my Mars Pro 2 printer the option to clean without removing it from the build plate is a godsend!
My only gripe is that when swapping over I have bits laying about, it doesnt take long to do and is hardly a chore but I’d rather have an in and out wash to cure, but for just starting with SLA so far I love it!
This is a solid addition to my 3D resin printing process. Much easier and less mess. Its maybe a bit of a luxury when washing and curing can be done without it but for me the expense was well worth it and make the whole process much more enjoyable
I know it’s aimed at Anycubic printers, but think a more universal hook for washing would’ve been a big plus!!
Washes OK, but wish it swaped direction more to increase agitation.
Curing works well with the dual “colour” leds, to cover multiple wavelengths.
Has a safety cut off, so will not upgrade without the lid on.
Wonderful piece of kit! Simple and hassle free. The washing side is simple, just select how long and start. The noise of it spinning up to speed is actually quite pleasant, very sci-fi. Curing again is simple, although the fans are a bit loud during this. But the parts come out cured with no sticky spots. The only thing I changed was putting some finer mesh inside the basket for smaller parts. But I mainly wash the parts whilst attached to the print plate.
Excellent build quality and super easy setup. Had interlocks to prevent incorrect operation. I am using for an Elegoo Saturn so the build plate holder is no good for me, but the basket is large enough to accomodate most large prints.
I’ve been printing an F40 engine from my own CAD drawings and it was incredibly hard to clean uncured resin from all the fine detail. This machine does it perfectly.
Really powerful vortex is generated that removes resin from the finest detail on the most delicate parts without damage.
No more mess either with this compared to manual washing.
Wire basket provided allows mass processing of part or parts from the Elegoo satu
The build plate attachment for the Mars/pro plate is very handy as I can take my plate straight from the printer and slap it into the machine and wash for 2-3 minutes. It actually makes it easier to remove the prints from the plate! The basket is nice once you’ve loosened things from the supports if they need an extra wash too.
The curing lights cover a large height and appear to have 2 different wavelengths as they come out as 2 different colours.
My only nit-pick is that the lid to the tub doesn’t quite fit easily so if that could get fixed then 100% a perfect solution for anyone with a Mars/Mars Pro/2. For anyone with an alternative printer I would probably still recommend this over other solutions due to the 30 second timer and higher light coverage.