Festool CT 17 E GB Cleantec Mobile Vacuum Cleane
Mobile dust extractor CLEANTEC CTM 36 E AC-LHS 110V
The higher the material removal capacity of a sander, the more powerful the corresponding mobile dust extractor needs to be. The powerful CLEANTEC CTM 36 AC PLANEX with a 36 l container volume is designed specifically for the extreme material removal capacity of the PLANEX long-reach sander. With tool holder, non-buckling hose and standard ComfortClean sealing slide for even more efficient filter cleaning. With its large container geometry, the CTM 36 AC PLANEX provides maximum volume. At the same time it is extremely mobile, thanks to swivelling castor wheels and large rear wheels.
Product highlights
- Achieve ideal results more quickly: Consistently high suction power, longer work intervals and significant time savings thanks to automatic filter cleaning.
- Convenient and safe: one rotary switch for all settings: length of cleaning intervals, spontaneous cleaning or automatic final clean after the machine is switched off.
- System get it done: con be coupled with SYSTAINERS and SORTAINERS on the SYS dock. Plug-in system for up to three additional modules – power, compressed air and EAA.
CLEANTEC CTM 36 E AC-LHS 110V
Ideal for drywall construction.
- Constantly high suction because of the compact high performance turbine
- Antistatic function prevents static developing during work
- Attachment of Systainers via SYS-Dock
- Hose garage and cable windup for greater tidiness and safety
- Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container
- container/filter bag capacity 36/34 l
- with AUTOCLEAN function
- approved for dust class M
- For dust with limit values > 0.1 mg/m³
- Flexible and clean in the workshop and at the construction site thanks to a compact design and a container volume of 36 litres
- Integral automatic electronic switch-on/shut-off for extraction from electric power tools
- Suitable for both wet and dry extraction
Product highlights – CLEANTEC CTM 36 E AC-LHS
|
|
|
|
---|---|---|---|
Filter cleaning. AutomaticAUTOCLEAN (AC) automatically cleans the main filter. The suction power therefore remains high at all times. Benefits: Time savings, longer work intervals and also less maintenance effort, a longer service life and cost savings. | Manual cleaningEven heavily clogged filters can be cleaned: When the container inlet is closed manually with the ComfortClean sealing slide, a strong vacuum is generated, which cleans the filter with maximum force. | Effective cleaningThe main filter is cleaned every 10 seconds to ensure reliably high suction power, even at a high dust removal rate. In the “AUTO” setting, the filter is automatically subjected to a final cleaning process once the machine is shut down. The cleaning can also be switched off if required. | Convenient and time-savingThe long-reach sander is securely attached to the tool holder. This enables abrasives to be changed quickly and conveniently or the range of the PLANEX to be extended with just a few hand movements. With a practical carry handle. |
|
|
|
|
---|---|---|---|
Rapid cable unwindingIt’s quick and easy to remove the cable thanks to a clever folding mechanism. | Maximum flexibilityHighly sensitive and non-buckling suction hose. | Tear-resistant fleece filter bagThe fleece filter bags are self-cleaning because they collapse after the extractor is turned off. This SELFCLEAN effect guarantees consistently high suction power until the bag is full to capacity. | Disposable bagPerfect for dust extractors with AUTOCLEAN, e.g. for extracting coarse dirt and chips. Dust-free disposal via a lock on the disposable bag. |
|
|
|
|
---|---|---|---|
Transport-safeThe locking brake ensures that the extractor will remain in place. The large wheels prevent the extractor from tipping over. The wheels can be turned, and the material that they are made from is resistant to wear. Because of the location of its centre of gravity, the extractor is easy to carry. | Large capacityThe filter bag is free to unfold because of the flat filter and the smooth inner contours of the container. This allows the bag to be filled uniformly and a nearly 100% utilisation of the filter bag volume. | For dusts in class MThe extractor is approved for dust class M. It is suitable for extracting harmful dusts with limit values > 0.1 mg/m³. The extractor features a large red label that indicates the dust class. | Extremely versatileFor dust, dirt and water. When absorbing water, the LevelStop shuts down the drive in good time and the motor remains protected. The wet filter can be set in place with just a few hand movements. |
Weight: | 11.9 kg |
Dimensions: | 60.8 x 52.6 x 38.4 cm; 11.9 Kilograms |
Model: | CT 17 E GB |
Part: | CT 17 E GB |
Pack Quantity: | 1 |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | Festool |
Quantity: | 1 |
Volume: | 17 litres |
I needed an extraction unit for a small belt sander, with a small outlet port for dust extraction.
This Festool vacuum unit really is just an extraction unit, i.e. it has a long hose, only 27mm diameter, with a rubber nozzle at one end which fits my sander. There are no ‘tools’ with it (although these can be purchased separately, I think). The hose is 3.5m long, pretty flexible, and has almost friction-free joints at each end which allow the hose to turn freely, so you end up in less of a mess with coiled up hoses.
The variable speed is electronic, very smooth, and I am able to use the cleaner at almost minimum speed attached to my sander and suction is still excellent. The cleaner is quiet at maximum speed, and at minimum much quieter than the average household vacuum, like a mains-powered Dyson.
There is a socket on the unit for a power tool, and when you activate the power tool the cleaner comes on automatically, and runs on for about 5 seconds afterwards – a joy after messing about with independent devices!
The bag is easy to fix, and looks as though the bottom end is closed just with a piece of brown tape; so it’s quite likely to be possible to open the bottom of the bag and empty it. I’m sure the instructions with the unit don’t suggest this, and it will depend what is in the bag as to whether you would want to open it. But there’s a possibilty of economy there, at least.
Overall not cheap, but excellent quality and well thought out.
I needed an extraction unit for a small belt sander, with a small outlet port for dust extraction.
This Festool vacuum unit really is just an extraction unit, i.e. it has a long hose, only 27mm diameter, with a rubber nozzle at one end which fits my sander. There are no ‘tools’ with it (although these can be purchased separately, I think). The hose is 3.5m long, pretty flexible, and has almost friction-free joints at each end which allow the hose to turn freely, so you end up in less of a mess with coiled up hoses.
The variable speed is electronic, very smooth, and I am able to use the cleaner at almost minimum speed attached to my sander and suction is still excellent. The cleaner is quiet at maximum speed, and at minimum much quieter than the average household vacuum, like a mains-powered Dyson.
There is a socket on the unit for a power tool, and when you activate the power tool the cleaner comes on automatically, and runs on for about 5 seconds afterwards – a joy after messing about with independent devices!
The bag is easy to fix, and looks as though the bottom end is closed just with a piece of brown tape; so it’s quite likely to be possible to open the bottom of the bag and empty it. I’m sure the instructions with the unit don’t suggest this, and it will depend what is in the bag as to whether you would want to open it. But there’s a possibilty of economy there, at least.
Overall not cheap, but excellent quality and well thought out.