ID-COOLING FROSTFLOW X 240 SNOW CPU Water Cooler AIO Cooler 240mm CPU Liquid Cooler White LED 2x120mm PWM Fans, Intel 1200/115X, AMD AM4
FROSTFLOW X 240 SNOW
CPU Water Cooler for Gamers
The FROSTFLOW X 240 SNOW is an all-in-one CPU liquid cooler with a 240mm radiator built for CPU cooling.
White LED Light
The LED light on the pump head and two 120mm PWM fans match your PC build.
Dual High Performance Cooling Fans
Equipped with two TF Fans which provide big airflow but low noise to dissipate heat from the radiator.
Compatibility
- LGA2066/2011/1366/1151/1150/1155/1156/1200
- AMD AM4
| | | |
|---|---|---|
Dual 120mm PC Case FansIt comes with two PWM fans with white LED light to provide better cooling performance and low-noise operation. | Better Heat TransferWith the bigger pushing motor, the pump can push more water flow to take the heat away more quickly. Featuring the white LED lighting inside to match your PC build. | Match Your PC BuildsThe LED light makes the PC’s builds colorful and bright. It can not only ensure excellent heat transfer but also brings visual enjoyment. |
 |  |  | |
|---|---|---|---|
| Cooling Fan | 120mm Fan (2pcs) | 120mm Fan (2pcs) | |
| LED Light | White LED Light | None | |
| Only use for ID-COOLING AIO Coolers |
| Weight: | 2.02 kg |
| Dimensions: | 41.9 x 22 x 14.1 cm; 2.02 Kilograms |
| Brand: | ID-COOLING |
| Colour: | WHITE |
| Batteries Included: | No |
| Manufacture: | ID-COOLING |
| Colour: | WHITE |
| Reference: | FROSTFLOW X 240 SNOW |
Pros, its works great. Cons no pump speed control and short tubes. I bought it for an older itx machine and it was easy to install and work flawlessly my intel K overclocked wend down almost 40 degrees from the stock intel coole
With the stock cooler on the 5600x, the temperature was hard to keep under control reaching upwards of 85c. This cooler keeps it at least 15c degrees cooler and is great value for money. Also very easy to install. Would recommend.
Very good for the price and fairly easy to install for my first time doing i
very noisy but keeps the cpu cooler bettern then other products
Highly recommend buying only problem is be better if there had applied the thermal on there self for easier install but again recommend buying
I’m honestly really amazed at the performance of this AIO cooler. I was running a stock AMD cooler and it wasn’t cutting it in terms of CPU (AMD Ryzen 5 3600) temps. I was idling around 55 C and at 60+ C under load (playing mostly apex legends). After install, my pc idles around 36 C and peaks at 47 C under load (still Apex Legends with same settings). In terms of quality and all that, it’s also been great. The hardware it came with looked high quality and the overall build was also great. It runs very quietly even at max speed and the white RGB looks great in my case. Make sure you check if your specific case can top mount an AIO because I had to front mount mine because I didn’t take that into consideration. This wasn’t any fault of the AIO itself.
Silent pump with efficient cooling keeping my cpu (i5 12600kf) under 50 degrees under load and idle temps of 25-28
Thumbscrews are a bit fiddly but easy to fit in the end and the lga1700 mount is sturdy
Pipes are a bit short if you are building in a larger case however in a lian li case they are
I replaced my EK Basic 240mm AIO with this cooler because of the aesthetics primarily, but it was also one of the least expensive options at the time that checked all the boxes I was looking for.
The Good:
-It comes out of the box with an LGA1700 bracket, which some $150+ AIOs STILL do not come with. This alone was amazing, as the EK one required a separate, $7 bracket to work.
-Looks fantastic. Was a little skeptical about the LEDs and logos due to the price point, but they look very premium and everything feels pretty much like the higher end AIOs do.
-Performance is SHOCKINGLY good. Paired with a i5-12600KF, running Cinebench for 20 mins never caused it to go above 60c. In games like Fortnite and Overwatch, this remains true, despite being in a tiny ITX case with a glass side panel on one side. Since it doesn’t get terribly hot, I never found the included LED fans to be too loud, which wasn’t true with the EK AIO.
The Bad:
-The mounting system in this is absolutely atrocious. It feels EXTREMELY outdated and took an extra person to install it. There is a bracket that twists onto the pump block, which is actually super nice, however, the back plate and pump block HAVE to be mounted at the SAME TIME, unlike the EK AIO where the back plate is mounted first, then the pump is mounted on with some screws. This is incredibly annoying because you essentially have to have one hand holding the backplate onto the back of the motherboard while you line up the pump block with the screws, and then screw it all down. It is simply a mess and could EASILY be made better by making a back plate that mounts to the motherboard first.
-My radiator came looking a little beat up (picture included). Didn’t really notice anything like this on the EK AIO, but it might be because this one is painted white. Not a huge problem, but worries me a bit about the longevity of this product. Also the radiator seems a bit more bulky than the EK AIO, so it may give you issues if installing it in a small ITX case (I have very little room between the fans and motherboard in mine).
Overall, great introductory AIO for a mid-tier processor.
Easy to setup.
When the fans are on max your can hear them a little but if ya wearing headphones its fine..
The white LED aint super bright but bright enough so you can see inside your pc.
Nice and cheap for a watercooler and does the job
Getting around 20-25 on temps on idle and in game on max setting 35-45
Overall very happy 5 out of 5
I just built a new computer system using a Ryzen 7 5800x processor and this ID Frostflow All in One water cooler. It came with clear instructions and was very easy to install. It even included thermal paste to put on the processor. The two fans (included) as well as the water pump glow white while the computer is on. I have the pump at maximum and it still is very quiet. My system (when it is not under stress) runs at about 31-degrees celsius (about 88 degrees Fahrenheit) which is super cool. If I were maxing the computer out with high intensity gaming I might have gone for something more expensive, but this computer is only used for music production. I’m pleased with this purchase.
I am disheartened because I really thought this would well for me. Sadly this AIO has actually raised the temps in my mid tower. I tried multiple times to switch and reposition and adding better thermal paste as the provided syringe came with some of the oldest looking thermal paste I have ever seen in a new box. Really stiff and hard glue like paste. I added some thermal from my new motherboard box and it def helped with temps. For some odd reason after installing I am getting the oddest constant restarts I have ever seen. Returning this item and looking for something better. Also the provided adapters for the radiator to hook up to the motherboard only comes with 5v vs 12v or at least the option for both so I am stuck with a white light vs motherboard controlled rgb. Wonderfully packaged but sadly I need to return for something that is actually going to help address throttling temps. What is crazy is the wraith cooler that came with my Ryzen 5 5600G works much better 🙁
EDIT: UPDATED
Ok I tried this cooler once again after figuring out my memory had crapped out in under a year. No more random restarts so I can properly test this cooler. My system started up at a stable 35C. Then my graphics card needed drivers updates installed. After updates, my system pretty much sat at a stable 50C when running demanding games. I can probably get better results using a better thermal paste and tweaking my voltages. Also I still haven’t overclocked my ram nor cpu. Incredibly silent! I do wish I could link this cooler with my rgb settings so I can get the full aura sync rgb setup. Though for the cost you can’t beat this cooler. A bit better than the wraith stock cooler. Once I tweak the fan curve and speeds I may get better results and update you guys once again.
All in all its a great option no matter your budget, easy to install and comes with a decent sized syringe of thermal paste, it looks good and performs excellent, my 5600x went from 60-70 degrees under load with the stock cooler on all games to no higher than 55 degrees c under a heavy load
Very happy with product. Installation was a breeze and it continues that breeze with its cooling power. Typical cpu temp is roughly 54c after intense gaming. After sitting idle/youtube etc. cpu temps have been averaging 43c with lows as low as 33c. Looks good LEDs are a little bit dimmer than i had hoped, but they are still visible with brighter LEDs surrounding it. For the price it cant be beat.
240mm all in one AIO for less than $60? count me in it is very well performing for my use and it is aesthetically pleasing.
good aio but very tight at the top with my ram in a corsair 220t case so be aware of board and ram your using plus case but overall works well for the price poi
i did not expect this thing to perform like it does. my expensive one had a pump failure after a month. my husband didn’t care what he had so we ordered this one. and it’s still going strong after 3 months.
Easy to install great temps
Stock intel cooler
Low-40C high-98C
This cooler
Low-20C high-48
With i7-6700k
Good looking coole
I have this running on my Ryzen 5900X and I can’t get the CPU to heat up excessively even when stress testing it. Mounted easily and does the job well.
I have used this AIO for a few months and it is great! Easy install and clear instructions. Great price too
I am running this with a DI iceflow vga kit setupon a GTX 1070sc in a smaller atx case. Like crammed and wedged in there.
I am holding on giving five stars until I figure out a slight issue. Once I determine for sure that it is my error, I will add that fifth star. My issue is that it is running a bit hotter compaired to the IceFlow vga. The 1070 is overclocked to a high, but Afterburner approved clock and with IceFlow idles at 29-32c and maxed I seen it get upto 49c while stresstesting/benchmarking. Stoked with those results btw. With this frostflow on a Ryzen 5600x, I have seen it idle as low as 39c, but usually it’s resting around 45-50c with bounces upward to 55-59c. I don’t have a manualy set overclock. Just game boost enabled. It jumps quick and using Cpu Burner with Furmark or Msi Kombustor it gets hotter pretty fast. It will kind of top out at 70-75, but will still very slowly keep ticking up. For everyday use/ gaming at mostly max settings, it does good. Cpu stays in the 60s or better most of the time. It starts to get loud sometimes tho for sure. I wanted this setup so I could run quiet and still cool. Ending up with not so quiet and fairly cool. I hear Ryzen runs hot, and game boost actually seems to tune me up guite a bit, but this seems more than that.
Right now, I am thinking that I am not getting good contact between the cooling block and the die. Maybe too little or too much paste, but I usually have good luck with my schmere of paste. I know I got it right with my GPU. I am using CoolerMaster thermalmaker as in my testing, when applied right, I seen 10 degree c improvents over other good pastes on an already efficient cooling solution. There is a chance that I disturbed my paste when I sat the block down. This was a tight build. Could be the small case, but I have great airflow and my Gpu is not suffering. Or it is not tightening down as tight as I like. I believe that someday I will turn thermal paste into diamonds kind of pressure 🙂
Will update when I prove rhat it is my error. Otherwise, I would and will buy ID cooling again. Great gear and great prices.
I love the AIO. it comes with everything you need and just works so well. It also comes with a fan splitter for the two fans Incase you dont have Enough fan headers on your motherboard. All around I have no issues with noise or anything. The whole thing is quite. Sorry for the bad photos .
This AIO is an incredible value for the money and looks absolutely gorgeous. The fans move a decent amount of air and hardly make any noise. I get really good temps on an overclocked i7-3770k with this cooler, even better than the temps my first generation Corsair H100i was giving me!
I needed to get a new AIO for my new Ryzen 5600X, and this gets the job done just fine. mounting bracket on the front on the left but doesn’t impact mounting. fans work great and it keeps my CPU well under 60C even under low and when it’s being overclocked.
This looks amazing and it works Beautifully , haven’t had problems with it so far , and I’m hoping I wont at all
This is an inexpensive 240mm aio, and works great on my dedicated LAN server pc. It’s overkill for my 65w i5 650, but it maintains a lower average core temp compared to the stock cpu cooler.
Comes with hardware that mounts as far back as my old core 2 duo lga775, and I have mounted it to an AM4 and lga1366. The included hardware is nice, but the included thermal paste should only be used until you can grab some better stuff later. It’s a thick grey bulk paste, which works, but you could definitely shed some more degrees with better paste.
The fans are very quiet and have rubber mounting corners, which is fantastic in my opinion. The fans and pump have white leds, and the fans are daisy chained separately from the pump.
The liquid lines are long enough to reach the roof or front of a micro atx case.
The water lines are not very big in diameter, and the radiator has a cheap paint job that has flaked off in places during installation. This isn’t a beauty queen build in my use case, but worth mentioning in case someone wants it to look good. It’s the same color as a papermate whiteout stick, which I used to cover the flaked off parts.
I wanted to use this on my ryzen overclocked 5700g, but this did not maintain my goal of under 65c core temp during render. Worked great when gaming, and stayed quiet. My cpu never throttled, it just got too hot and loud during renders for my tastes. My expectations were simply too high in that case, so I moved it to a 65w cpu build and it works flawlessly without exceeding 60c core temp in a 70f ambient temp environment when running the dedicated server softwares I have.
I’m impressed for the price, but I wouldn’t recommend it (or any liquid cooling) if you are just a budget or midrange gaming user. If using it in a sustained load situation, like rendering and server hosting, it works fantastic on keeping 65w parts cool and does so very quietly.
Please isolate your pump cable and put it on a header running %100 pwm, or 12v.
Or plug it into a molex/sata to pwm cable.
The radiator was too big for my case, but I decided it would fit well on top of my case in the open air. The tubes were long enough t do this, so I put it up there. It works well seeing as it cool air all around. No heat from internal mounting. With the fans at there lowest rpm’s it stays at 103 degrees at idle and maxes out at 143 deg. during davinci resolve video rendering. It used to heat up to 160 to 175.
It is quite until I push the fans to max rpm, but is still quiet enough to use my pro recording mic in the room with my vox guard.
For the price you can’t beat it. At one point, wi the air con on in the room it dropped to 96 deg.
I’m happy.
i bought this aio to replace the standard wraith prism cooler that came with my ryzen 7 3700x as i wanted it to match the rest of my build. i didn’t have any experience with aio’s beforehand, but i’d recommend watching a few YouTube videos as the instructions aren’t super helpful when trying to figure out how to install the back plate. also letting the cooler run for a few minutes before installing it is ideal to test for any defects or leaks in the pump and to make sure it’s working correctly. so far, its keeping my temps around the 30-40c mark, even with task heavy applications. as for aesthetics, the lights are super bright and add a nice glow against the rgb from other components. the fans aren’t silent but they aren’t loud either, basically what you’d expect from an aio around this price range. the only issue i had was making the radiator fit on top of the case, i had to position it further forward as the ram was in the way, but that might just be an issue with the fan slots on my case (corsair airflow 4000d). i’d highly recommend this if you’re new to water cooling like me, and also looking for something to compliment your build 🙂
(please ignore my cable management, this photo was taken before i adjusted them)
Works as advertised, screws are proper , everything aligns, hard to find such a good value due to the white color, but this is the exception. If your building a white system, this cooler should be on top of your list of hardware’s
Great product besides the fact that led colors are not able to change. Otherwise, this does cools the cpu very well and looks good.
Edit: I can’t complain much besides my initial comments. I love this cooler. I’ve exchanged 3 cpus and it functions perfectly with each one. Love this product.
Great aio.. cant complain.. great price build quality is great looks amazing only thing is the cables were a bit confusing
Awesome cooler, great performance and value! Using it in my new I9 11th gen and it cools nicely.
Stress test puts my CPU temp around 60C in heavy loads.
First AIO ever installed , pretty straight forward instructions for it the kit includes everything you need and also bracket for both amd and intel.
At this price point I believe it’s a pretty good deal , it’ll keep your system nice and cool , my system is running now at 30 degrees idle and after throwing some heavy benchmarks on it haven’t seen anything more than 65 to be honest .
I’ve had it for two weeks now so I’m still monitoring for any pump failure etc. but so far so good
Not much I didnt like about this aio. If you are in the market for a cheap aio look no further than this baby it is quality for the money.
Pros:
Price is fantastic.
Dropped my temps from 70C, at stock clock speeds with a 120mm AIO, in games to 60C with a 5GHz OC @1.3v. (it tops out at 75C in Prime95).
It looks really cool.
After the air bubbles are pumped through it is very quiet.
Cons:
It’s pretty big but for a 240mm rad, it’s bound to be. I had to put one of the fans on the outside (in the front of the case) in order to fit my GPU. It works but it doesn’t look pretty and I now have an exposed fan because I had to remove the plate of glass.
For the first 15 minutes of run time it had to cycle through a lot of air bubbles. Afterwards it was good though.
Conclusion: while this is a cheap AIO and probably isn’t as good as the high-dollar name brand ones, for half the price and good enough performance, I can’t help but to recommend this to anyone looking for an AIO. I will update this review further down the line to see where it’s at compared to now.
The cooler works great. Dropped my temps from my old 120mm by 15C. My only complaint is the fact that their mounting hardware did not fit the back of my LGA1200 socket, so I had to use the mount from my previous AIO and rig it to work with their LGA1700 standoffs. Their backplate was way too small and only one was shipped with my order.
UPDATE UPDATE: I found the reason why I am getting such high temperatures and it is because I left the stupid little white plastic piece on the AIO and the plastic did not melt thank god and I was able to fix the problem. I am now staying below 60c with load and at 40c on idle!!!! BIG DIFFERENCE. So glad I fixed this before it got any worse.
I chose this over the more expensive offerings from Corsair and other well known brands. Glad I did, quality build and excellent performance all round.
So far it’s performing well! Installed on a x79 lga 2011 socket and was pretty easy to install. One thing that does seem a little cheap is the light ring around the block as it isn’t evenly lit and fairly dim. Will definitely update if anything occurs.
The cooler is very good, looks nice and is easy to install and helps achieve really low temps.
however the included fans arent very good. they are loud and arent very powerful, but what can you expect for 50
Am impressed with this cooler.
Half the price of many comparable product and it is still excellent quality
Have an I7 3GHZ CPU over clocked to 4.2GHZ running Win Server 2016 and 4 builds of Win Server 2019 in HyperV and the Temp for the CPU is coming in at 38C.
May update this review in the summer when the ambient temp is higher.
The white LEDs on the fans are a very nice color of white, although they do show as blue in the picture ive attached. My cpu thermals have been doing incredibly well since install, averaging around 28-29c idle and under heavy load I have barely surpassed 60c. The AIO also has a very nice look to it. For the price I am blown away by the performance of this cooler. It was very easy and simple to install and came with a separate tube of thermal paste so you yourself can gauge how much you’d like on your cpu.
Cons
-some of the fins on the rad were slightly bent when I received the produc
This is a fairly budget option but mine works fine and goes well with the aesthetic I chose – black and white. The tubing has a fine webbing sheath too giving it a clean look. I used a push/pull config and it keeps my Ryzen 3600 cool as a carrot.
This cooler works great. But it took about 2 weeks for the bubbles to work through. It was very noisy at first because of this. But now can operate silently. It can get a bit loud when the fans are running high rpms.
For the price you are getting its very good. My computer is quite now from before. Would recommend to anyone. Only thing that is bad is the instructions not very clear. If someone with no computer background got this they would struggle to install this. Apart form that very good bit of hardware
i5 8400 processor
IDLE: 27-30 Celsius
Full Stress: 55-60 max
And this is at a really low speed of the fans (900-1300)
I am very pleased, it is cool and quiet, the build quality seems good, nothing is leaking
Below is by initial review but i was able to contact the seller and they agreed to send me a replacement free of charge, which is incredible of them so,
THANKYOU
It looked really good when unboxing with good packaging but i noticed the fins were bent which it very worrying the pump is making a screeching noise which again is very worrying I’m about to contact the seller but I’m worried that it has been previously used as one of the mounting holes was stripped of its treads. i would expect better from a product that cost me 55.99 or so.
its really nice it was really easy to install and it was cheap it keeps my ryzen 5 3600x below 45C and when im playing games it goes up to 50 not that bad and this is one of the best items I have ever purchased
Got this to replace my wraith stealth which was struggling in the terrible case i used to use. continued to use the cooler while constantly swapping parts in and out and eventually completely overhauling the system. i only replaced it so i could get my hands on a larger radiator. (attached picture is the system just before changing the cooler to the new one). also ignore the frayed sleeving – that’s just where the sharp heat spreaders on my old ram got caught on it. of my 3 aios, it’s my favourite and is definitely worth more than it costs imo
For the price, it cant be matched, had an NZXT Kraken for 2 years before this and it just went, hopefully this lasts the same amount of time, but for now, looks amazing and does such a good job.
Temps wont go over 40 now where they used to hit 70. Amazing Cooler, just get it! 50 is a steal!
Love this water cooling system, bit tricky to get set up as the adapters for different processors get complex and everything is a little tight fit. Once fitted though they are quiet and keep my overclocked processor running very cool.
This review is for the “ID-COOLING FROSTFLOW X 240 Snow CPU Water Cooler”
The cooler knocked off about 15-20 degrees Fahrenheit off my desktop’s CPU. The dual fans are quieter than the single unit I was using before on my previous CPU heatsink. For the low price I was able to buy this I think I got a pretty good deal. Recommended!
Went from a CPU cooler 120mm air to this and my 5600x does not go above 61 degrees on full load with a 0.2 overclock
Looks fantastic and by far the best watercoler for this price and I’ve tried the corsair h100x and coolmaster lite 240mm. The corsair h100x had temp issues with my 5800x and the coolermaster lite had fans that sounded like a jet engine. This is completely silent with great temps and clean white RGB and for the price of 50 you cannot complain at all. Highly recommended.
I absolutely love that liquid cooler I’m using it to cool my power hungry i7-920 oc to 3.8ghz and the highest temp it has hit is 62c. My only problem with it though it is a bit loud I would have preferred something a bit quieter but other than that great coole
you would be wary about a 50 pound aio cooler ,i was too , i even had paper towels on top of my gpu because i was certain it was going to leak ,but no.my cpu when idle is sitting at 30 degrees celsius. the lighting on the pump could be better but overall it’s really good and i would recommend
A good and cost effective 240mm AIO CPU Cooler that performs well so far, only time will tell about its longevity.
35 degrees after hours of game play and idle at 29….never expected that ..hope it last foreve
i am very pleased with this aio i was not sure about it at first but just went ahead a got it i glad i did as the temp on my ryzen 2600x is at 30C and not like the air cooler that came with it some people have mention about the fans make to much noise which i not found on this aio they are very quite and the pump you can not hear at all so for people who want to buy it just go ahead get best on i had yet at 50 pound
Nice looking aio and good price compared to the marke
The install for the am4 platform was easy to follow and with abit of patience easy to install. Value for money was amazing, half the price of other brands and performs the same if not better. Overall I’m greatly pleased my purchase and would recommend it to others
Doing the job perfect, easy to install, good price, very quiet ,what else i need?
My CPU temperature has gone from 50 degrees idle to 30 degrees. The fans do get quite loud when at high speeds but if you set the fan speed to change with the CPU temp noise should be relatively low. Install was easy on a am4 socket. The radiator and pumps build quality is great. I do get sounds of water when turning on the computer but no sounds when running; I assume this is normal. Overall its a great product for the price, I would defiantly recommend.
First things first, i am using a ryzen 9 3900x, Geforce RTX 2070 super and 32gb of ram.
I initially went for a budget pc and upgraded down the line, thats why i got this aio. For its price its really good, my cpu stays below 80 degrees under heavy load (which is really good for the 3900x) while staying relatively quite.
In my opinion this Aio looks absolutely gorgeous especially in white.
If u want a water cooled system but u are on a budget, get it!
My unbelievably laggy Ryzen 7 2700X that was idling at 85c is now avg 40c with this, my pc has now fully transformed to a beast.
Buy this quickly!!!
So after a weekend of a heatwave in the uk I found my cpu temps hitting 100C+ while watching YouTube streams now with the new cooler fitted during even hotter days it’s barely hitting 60C with game loaded and a stream running on a second screen. The fans run very silent under a full load only problem I had was fitting the radiator in my case not the coolers fault my case is old and was never designed to hold a 2 fan radiato
Keeps cpu at a low temperature and is very aesthetic also is fairly easy to install just follow instructions
TL:DR. Buy it, you dont need to be spending anymore than how much this AIO costs
I bought this to replace my noctua NH-U12S as I was seeing dips in cooling performance. All I can it has cut my CPU idle temp by 10-15 degrees. A little bit finnicky to install but what AIO cooler isnt, you really dont need to spending more on an AIO than this. Very sleek and goes very well with the design of my pc as I’m not into all the RGB.
It’s good for the price but not the greatest on the market
Went from 80-90 with cooler master 212 evo
To 75-85 With this coole
With this AIO water cooler installed, the fans ramp up to about 60% and the CPU stays at around 64 DegC on a hot UK day (28C room temp).
If it passes a week of leak watching, I’ll be very happy.
Installation is OK, although a tight fit getting it in the top of the case against an Asus main board with the plastic connector cover and large chipset heatsinks.
Really great build quality.
Comes with lots of fittings and adapters for all types of CPU.
Fitment is quick and easy.
Temps are running nice and low.
Can’t fault it at all.
Even the boc and packaging are nice .
(The CPU its on is an I7-9700k)
Out the box you can tell its sturdy and made out of good material. For this price I thought sure it would do the job but not be this well made.
Onto the instructions they are clear and pictured nicely however they lack content and detail in the construction. However its fairly easy and common sense can get you through. Just better instructions may help a less experienced person with doing it and having confidence in them selves.
The installation was easy and well designed (Better than some larger brands if I do say so from experience). The pipes on the CPU block have nice 90 fittings that can rotate (Somewhat). This makes installing and getting the pipes how you want just a little easier.
Temperatures… well when I say I was shocked. Yes its a 240mm Rad on a 9th Gen so the temps would be cool but these are good temps. Better than my H100 X from Corsair.
Resting temps: Lowest: 30C // Highest 39C
Gameplay for 1 hour: Low: 47C // High: 53C
Gameplay for 4 hours: Low: 49C // High: 58C
3Hours of 3D Rendering for Uni: High: 61C
So all in all its brilliant cooler and worth the shockingly low price.
So surprised, this is actually the best performing AIO I’ve ever had. And no annoying RGB to deal with. Great performance at a third of the price of offerings from ASUS and Corsair. It’s a surprising no brainier…
I purchased this AIO as my previous one from another company failed on me. On top of being much more robust feeling, this cooler has provided me with drops in temp around 20c over the previous AIO. I am running a pretty hot case, however my average temp is at 35c on idle and 50c during gaming. Overall I am very happy with this cooler however some of the screws provided were miscast and were a bit low quality, I substituted them with screws I had on hand.
Very solid cooler and a very good price. I definitely recommend this produc
This product is sleek looks good and does what advertised the included fan are brilliant
The one downside is when under a heavy load the aio stops cooling at arround 50c so you need alot or airflow to compensate for that other wise it a good produc
I bought this item for my son for his birthday and he loves it! It was installed within a few minutes, works perfectly and looks great! It’s a nice colour as well as being a lot cheaper than alternatives.
Absolutely stunning to say the least. Easy install and does it’s job. So so so cheap compare to competitors, and dare I say it’s prettier too..Really quiet too so that’s a bonus
Recommend
Great value for budget rigs even more for those of you who don’t want to go crazy with oc the aio is grea
I am a complete novice when it comes to anything to do with gaming PC’s and took the plunge on a prebuilt. Unfortunately the stock intel fan wasn’t quite cutting it so I saw this for 54 and saw the positive reviews and that it was almost half the more well known brands out there (my budget was about this mark) This was really really easy to fit. Instructions easy to follow. It will take you 10 mins maximum if you know exactly how you want it.
I could only fit it on the front of my case (Cit Raider Mid Tower) due to my motherboard (msi h310m pro-m2 plus) not allowing the space to mount it on the top. But this no issue. I am very happy with it and now my CPU doesn’t go above 45’C at any point(originally hitting 85’C). I play a lot of Call of Duty and it was causing huge sudden FPS drops due to the cpu overheating but I have yet to have this happen since using this.
The quality is second to none. A nice sturdy product. I thought there would be some sacrifice due to the price, but….from seeing the more premium ones, I’m glad I saved my money and got this. Can’t tell the difference.
I’m not RGB mad so it doesn’t bother me that the fans aren’t RGB(you could change them easily if you wanted too) but I really like the fact that on the pump that there is just a nice amount of white light to highlight the logo.
All in all I’d give it 10/10 from me.
Using this to cool a Ryzen 5 3600, I was previously using a Wraith Prism, however was idling at 45-50c which isnt uncommon. I know Idle at 35-40c and now the CPU doesn’t touch 60 degrees while gaming. The pump was loud for the first minute but is now quiet. Cooler was easy to install even in a M-ATX case. I would reccomend this product & will update this review if any issues occur.
Does the job it was purchased for keeps my ryzen processor nice and cool
First thing is first- BUY THIS at this price it’s a steal. I am running a i9 9900k and it was getting hot on my old cooler at 99-105 so urgently needing something better. I wanted to go water cooler but didn’t want the expense until I came across this.
Everything you need is in the box, adaptors, wires, splitters and power adaptors you need nothing.
The pump is a 3 pin and plugs into your 4 pin cpu header socket which your old fan would normally plug into, alternatively a power adaptor is provided so you can power it straight from the PSU if you’d like. Remember the pump always needs to be running at 100% so make sure if you plug it straight onto the board that the fan settings in your bios are at max.
The radiator fans plug into your headers also and there is a splitter so you can power both fans from one port.
There are reviews saying this is a bad product and you have to leave it loose as the screws nearly go through the radiator fins. This is not the case the screws are a set length so when it is tightened yes it is near the radiator but no where near going through.
On start up the pump was a little noisy, this subsided after 5 minutes I can only assume it was settling or priming or something.
When I used to launch my game up my i9 would shoot straight to 95C + and this bad boy is now idling at around 24C and I have done a stress test and tried some demanding gaming and I can’t get it to go over 55C. That Is AWESOME for such a cheap kit. I love this, its worth every penny. Buy it.
Works great on my 2700x, averaging on 30-40 degrees celcius
Keeps my 8 core 16 thread ryzen 7 1700 cool even in the harshest of circumstances, I am impressed with this cooler!
However make sure you aren’t running the fans at max speed, as they get quite loud, I went into my motherboard bios and set it to run on a quieter setting, even then still cooled perfectly.
Keeps my ryzen 5 3600 at full clock icy, fans can be tweeked to be quieter but out of the box are fairly standard in terms of noice level. Easy to mount.
Value for money is very good, keeping my 2700x under 55 degrees!
Good for a first starter AIO water cooler installation, nice and easy to fit too!
Easy to setup and mount, using on my Ryzen 5 3600 it brought non overclocked stable temps down below 40c; even after overclocking my Ryzen 5 3600 to 4.2Ghz I am yet to see temps over 80c; runs quiet, runs well and all at a decent price!
Considering the price, 2 R id cooling liquid cooler is good
Attached it upper side
Amd 3600
Gtx1660super
Case gungnir 110r
Temp around 40 to 45 degree
Keeps cpu temps down pretty much silently when the PC is under low load, when gaming it ramps up a bit but so much better than the stock cooler on my ryzen 3600. The pipes are wrapped in a very dark grey shroud which looks better than it does in the pics. and the radiator is all black. Managed to pick it up in a sale for less than 50, which to be fair is a total bargain for a aio.
Good quality and easy to install although the fans aren’t the quietest.
Fits in my NZXT 510 fine, bit of a scare with the pwm to sata lead causing the pump to over heat and system to shut down, but got that out and went straight from pwm to motherboard and worked perfectly. Keeps my ryzen 2700x nice and cool (40 degrees) while boosting
Bon produit.
Fait le job.
Efficace pendant le fonctionnement
Un tout petit peu bruyant lors d’un “stress test” mais en fonction du prix, il y a rien redire.
je recommande.
Wow, for the rice I paid Im not sure how they manufactured such a brilliant product. My temps don’t go above 48. Is a brilliant aio.