Invision Dual PC Monitor Arm Bracket Ergonomic Height Adjustable (Gas Assisted) Full Motion Long Arm Desktop Clamp Mount for 22”-32” Screens Tilt & Swivel VESA 75mm & 100mm Weight 3kg to 12kg (MX900)
If you are looking to mount 2 computer screens side by side, the Invision MX900 height adjustable gas assisted full motion large dual PC monitor arm bracket provides the perfect solution.
Why choose a mechanical arm with limited versatility when you can have a product with control and flexibility?
Our dual monitor arm mount is easy to install and includes a full step by step installation guide.
| | | |
|---|---|---|
| | | |
| Dimensions: | 43.9 x 29.6 x 13.4 cm; 6.97 Kilograms |
| Model: | MX900 |
| Manufacture: | Invision Technology |
| Origin: | China |
Ich arbeite viel im Homeoffice und habe mir daher einen 32 Zoll Monitor zugelegt. Leider ist dies ein Gaming Laptop und hatte das bliche Problem, dass sich die Hhe nicht einstellen lsst.
Also habe ich nach eine Lsung gesucht.
Ich habe zum ersten Mal solche Monitorarme verwendet und war anfangs ein wenig skeptisch ob so ein Arm wirklich einen 32 Zoll Monitor mit 9KG heben kann.
Aber Top..ich wurde angenehm berrascht.
Aufbau:
Super einfach mit Anleitung. Ich habe die Festziehschrauben gewhlt. Zur Sicherheit und zum Schutz des Tisches habe ich noch eine Metalplatte aus dem Baumarkt dazwischen geklemmt.
Handhabung:
Die Arme funktionieren super und selbst mit dem schweren Monitor lsst sich der Arm ausfahren und in eine beliebige Richtung fixieren.
Bislang bin ich super zufrieden und spare mir auch Platz, da die nervigen Monitorfe wegfallen.
This is a pretty decent dual arm bracket for the money. It was relatively easy to set up, although the instructions weren’t laid out too well (needs to be on an A4 sheet, the A5 is just too small).
I have an LG 27GL650 attached to one and an LG 32GP850 on the other. The 27″ is fine and stable for the most part, but the 32″ is just too heavy and shakes when the slightest vibration goes through the desk. If you have a monitor over 27″ I would recommend getting a heavier duty arm.
Other than that, the ergonomics are great and range of movement and adjustability is also good.
An sich ist die Monitorhalterung sehr gut. uerst stabil, wertig und leicht zu montieren. Allerdings bentigt sie, auch bei greren Monitoren, sehr viel Platz nach hinten. Mein Schreibtisch steht an der Wand und ich habe es nicht geschafft einen 32″ und einen 27″ Monitor auf Augenhhe aneinander zu bekommen. Egal wie ich die Arme eingeknickt habe, es blieb immer ein 5-10cm breiter spalt.
Die Beschreibung sagt zwar 22-32 Zoll, aber die Arme sind so extrem lang, dass selbst 34″ or sogar 38″ Ultrawide-Monitore kein Problem sein sollten. Fr Monitore unter 27″ hingegen, muss der Tisch schon im freien Raum stehen.
Che posso dire… Ottimo materiale, robusto e molto stabile… Ha sulla base 2 porte USB molto comode ed io ci ho messo un monitor 32” curvo Samsung (G5) e un monitor benq 24″… Se avete bisogno di montare 2 monitor e tenerli sospesi, questo un ottimo prodotto.
Bonjour,
Le produit est relativement bon au niveau visuelle et donne une image de robustesse et de solidit.
Trs facile a monter l’explication est bien dtaille et en franais.
Le rglage des vrins se fait trs facilement, ce qui permet d’ajuster le positionnement des crans.
J’ai actuellement un cran 34″ 21/9 et un 27 WQHD et les 2 tiennent parfaitement
Je suis trs agrablement surpris par ce produit et le recommande fortement.
Petit point ngatif la fixation de l’cran sur le bras est faite par une pice en plastique ( relativement robuste je prcise ) mais qui pourrait dans le temps peut tre se fissurer / casser, je verrai a l’usage dans quelques annes et les cbles USB qui auraient pu tre un peu plus long et en USB-C
Die Halterung ist super. Qualitativhochwertig. Hlt meinen 32 Zoller problemlos, auch beim hchsten Hebelgrad.
Jedoch sollte man sich bewusst sein, wie lange die Arme sind und dass diese ggf weit nach hinten pber den Tischhinaus abstehen. Man braucht entweder einen tiefen Schreibtisch oder mindestens keine Wand dahinter.
Meine Gte, was fr ein Gewicht! Die sehr geschickt eng gepackten Bestandteile dieser Halterung sind wirklich schwer. Ich habe erst mal alles ausgepackt und besichtigt: sah sehr ordentlich aus. Gute Verarbeitung, gute Beschreibung. Alles vorhanden, alles passte exakt. Bin wirklich sehr angetan.
Am meisten Stress hatte ich mit dem Entfernen der alten Stnder von den Monitoren. Dazu gabs natrlich keine Unterlagen mehr… Aber jetzt hngen beide an der neuen Anlage und alles funktioniert wie es soll. Weil es jetzt so einfach ist, habe ich den linken Monitor um 90Grad auf hochkant gedreht. Das ist ein ganz neues Gefhl beim lesen. Seltsamerweise sind ja die meisten Bcher, Zeitschriften, Abhandlungen, pdf usw. immer noch nicht im Querformat. Und jetzt alles so schon gro, eine ganze Seite auf einmal im Blick. Ich bin immer noch begeistert. Nix zu meckern, volle Empfehlung.
The arm is well made & easy to put together & the price is good. Adjustment of the gas pressure to compensate for the weight if the monitor is very easy to change and so far works well. If there is a slight niggle it is the additional USB ports at the bottom of the stand, which personally I remove as they are just in the way. Otherwise a good product at a good price.
Fantastic, easy to assemble, clear instructions very strong very easy to adjust to balance the weight to spring to make movement effortless. One suggestion, attached the monitor connection with upper arm, before dropping onto lower arm makes for an easier install.
I have 2 32″ monitors on my desk and they used all the space prior to this – looks really well and handles the weight efforless.
The photo is for reference.. remember these are 32″ so huge monitors for a desk!
Assembly was straight forward apart from one step where the instructions were unclear. In adjusting the tension of the arm, the Allen key doesn’t fit UNLESS you bend the arm down!
With that works as expected. A significant improvement over previous designs is that the faceplate is smaller, close to the advertised 115mm x 115 mm. This makes it compatible with the monitors from Lenovo that have an inset for the VESA mount (mine was around 120 X 120 mm square).
A sturdy product. easily coping with 2 x 33″ 4k monitors. excellent value for money.
I have been using this setup about 1 month with 27” and 24” screens and I really like it. I probably wouldn’t have needed as strong arms with those screens and could have selected a similar, but less expensive product, but I’m quite happy what I got. Screens stay in place. (Only worry, not sure how many years gas spring monitor arms last. These are first I ever have got.)
I don’t use usb ports. I think an usb hub instead of usb extenders would have made more sense for final product.
The only regret I have is not getting monitor arms sooner. Very easy to assemble and instructions are in multiple languages without spelling mistakes, properly worded and easy to follow. Took me about 10 minutes to assemble and add monitors.
Feels like from high quality strong metal, a bit thick looking. I have added two 27” monitors and it handles it with a breeze. I had to lower the tension for it to be able to adjust easier.
The only concern is that it will require some space behind the desk if monitor is pulled all the way back. All in all very happy with my purchase.
Heavier monitor needed some serious tightening of the rotating mount to stay up straight even though was in the weight limit mentioned.
Une info qu’on ne trouve quasiment nulle-part, c’est la largeur max des crans qu’on peut installer. J’ai mont un ultra-wide screen 21:9 de 34″ (81cm de large) ct d’un moniteur 16:9 de 27″ (64cm de large), et a passe sans problme, et c’est trs stable. Du coup, pour tre plus prcis, le centre de la fixation VESA de chaque bras va facilement 55cm du centre du pied, tout en gardant de la flexibilit de rglage.
Seul reproche : les ports USB sont en USB 3.0, donc pas top si on veut avoir un accs facile aux ports 3.1 gen2 de son ordi (a peut probablement s’upgrader avec un peu de DIY, assez facile d’accs par le dessous du pieds).
They are very sturdy and feel solid. Made the mistake of trying to set it up by myself but lord it was a struggle. Eventually caved and asked for help and it went much more smoothly. As long as you tighten everything correctly you can find the balance between the monitors staying where you want and also be able to move them occasionally, Great for when I want to sit at my desk in different ways etc. I have 2 32″ curved monitors and they go on just fine. The usb ports on it are cool but were in the way when trying to secure it to my desk so I unscrewed them. I still use the cables though, very handy extension cables.
Habe dieses Produkt fr meine zwei 27 Zoll Monitore gekauft. Die Dmpfung lsst sich sehr leicht einstellen und haltet dann auch in jeder Position, das war mir sehr wichtig. Diese zwei Arme schauen schauen sehr robust aus und die Oberflche hnelt einen Klavierlack. Montage ist selbsterklrend. Ich bin sehr zufrieden, alles Top auch die Lieferung und Verpackung. LG
The gas strut has issues in stability with the heaviest monitors.
I upgraded to this monitor from a weaker monitor arm after buying a bigger heavier display for my gaming PC. This monitor arm can hold a large size gaming monitor which is heavier than a normal monitor. Easy to install and relatively easy cable management. Makes this my favourite monitor arm yet.
I looked for ages at different monitor stands and am super-pleased I chose this one. Very strong and sturdy, with a wide base plate, preventing monitor wobble or damage to the desk surface. Easy to assemble and adjust, especially thanks to the gas-assisted arms. I love the USB ports on the base too — didn’t think I’d use them at first, but it’s great to be able to plug two cables in there, then the cables from the base into the power point (hope my image makes that clear!). Only slight drawback is that you need to pull your desk 10cm+ away from the wall in order to get the monitors to align.
I looked for ages at different monitor stands and am super-pleased I chose this one. Very strong and sturdy, with a wide base plate, preventing monitor wobble or damage to the desk surface. Easy to assemble and adjust, especially thanks to the gas-assisted arms. I love the USB ports on the base too — didn’t think I’d use them at first, but it’s great to be able to plug two cables in there, then the cables from the base into the power point (hope my image makes that clear!). Only slight drawback is that you need to pull your desk 10cm+ away from the wall in order to get the monitors to align.
Very nicely made. Strong and stay put when you adjust them. Good value with the discount. Excellent overall.
Very sturdy metal arms. Gas compression makes it sound stable and usb extenders on the front panel makes it easy to maintain a good usb dongle connectivity to our wireless devices (ie wireless mouse and keyboard) especially when gaming.. so this is the perfect solutio
Absolutley love this !! About 18 months ago I bought another dual monitor stand for my 2 32 Dell monitors and it was poorly balanced and pretty awful, It was only when i purchased this one I have now realised how bad my previous one was, it would wobble on any desk movement and if it was nudged would drop out of place to the point i eventually had to use duck tape to hold my screens in position…..I just thought that was monitor stands were. I recently ordered the mx900 by invision because i noticed it had 2 arms and usb ports on the base. IVe since set it up and I absolutley love it, i can move my heavy 32 inch screens wherever and whenever i like including higher (which i couldnt on m previous), rotate them with ease and it makes my desk feel so much better and tidier.
As this was the same price as my old one my only regret is i didnt find this one first.
Highly recommend if you have big / heavy monitors and want something solid enough to hold them in place.
Absolutley love this !! About 18 months ago I bought another dual monitor stand for my 2 32 Dell monitors and it was poorly balanced and pretty awful, It was only when i purchased this one I have now realised how bad my previous one was, it would wobble on any desk movement and if it was nudged would drop out of place to the point i eventually had to use duck tape to hold my screens in position…..I just thought that was monitor stands were. I recently ordered the mx900 by invision because i noticed it had 2 arms and usb ports on the base. IVe since set it up and I absolutley love it, i can move my heavy 32 inch screens wherever and whenever i like including higher (which i couldnt on m previous), rotate them with ease and it makes my desk feel so much better and tidier.
As this was the same price as my old one my only regret is i didnt find this one first.
Highly recommend if you have big / heavy monitors and want something solid enough to hold them in place.
I brought this as I wanted to have two monitors on my desk to help when im working and streaming. I didnt want to get a wall mount as I hate the idea of drilling into a wall and if I need to change my set up or location I have to deal with drilling new holes in walls just to re-do my set up and that can be a hassle, so to save time I decided to go for one of these and have a chance to experience a wall mount feel whilst not having to deal with the drilling into the walls, and this new way has allowed my set up to be mobile so if I do need to change its location to another room or area in the house im free to do so. Yes if I plan to get a new desk then I would need to reassemble this unit but its a lot easier then the old way.
Set up was easy, and instructions were clear and simple to read. I did have to drill one single hole in my desk but it was a lot easier and hassle free as I didn’t have to do much in the way to getting the right spot. I have a 1080p monitor and a 4K monitor on my mounts, and so far they seem to be supported and no structural damage has been made to the desk, so far it looks promising but only time will tell.
Really love this and hope to continue to use it for many years.
It took me a while to get used to them and at one point I was going to return them. However they are brilliant. Especially with the home office and my wife using the desk on some days she can easily adjust the screens to how she wants them and I can just move them back when I’m using them.
Only consideration to keep in mind is, if your desk is at the wall you’ll have problems with the swing obviously but like me I knew exactly how I wanted my arms so wasn’t a problem.
It took me a while to get used to them and at one point I was going to return them. However they are brilliant. Especially with the home office and my wife using the desk on some days she can easily adjust the screens to how she wants them and I can just move them back when I’m using them.
Only consideration to keep in mind is, if your desk is at the wall you’ll have problems with the swing obviously but like me I knew exactly how I wanted my arms so wasn’t a problem.
A little bulkier than I thought, but sturdy and more than capable of supporting large monitors. Easy to assemble with good instructions. Only one criticism- my 2nd monitor is a new Samsumg 28inch with the smaller 7.5cm mount – the bracket which caters for both 10cm and 7.5 fouled the edge of the casing. Easily solved by grinding the edges off the bracket. Movement is smooth and well balanced.
Got rid of all the clutter on my desk excelle
Sar breve.
Facile montaggio e regolazione.
Ottimo per doppio schermo di cui uno verticale e uno orizzontale (nel mio caso dell ultra sharp 24 e 25).
Non mi ha garbato tantissimo la chiusura dei passacavi cavi inferiori perch nel mio caso ho fatto passare parecchi cavi (5 per ogni schermo) e se si muove troppo pu capitare facciano leva e aprano lo sportello, ma di base fanno il loro.
Nota di merito il badge Climate Pledge Friendly.
Nel complesso consigliato.
Great for bigger and heavier monitors. I wish I brought the smaller ones as my monitor is a bit light for this. But I’m still happy with it ( I did have to tape an iron nugget to the back of the monitor it make it heavier)
Really very happy with these arms.
I wanted something that had easy adjustment, allowed me to stand up when I wanted and was stable enough to support a MacBook Pro.
I bought it in conjunction with a VESA laptop mount. It was really very simple to set up and configure.
The desk clamp is especially well designed, maybe these are everywhere but I’ve never seen them before. The design makes for a really stable unit when clamped to a desk.
The laptop mount I ordered attached without issue.
The length of the arms is more than enough to allow for seated or standing use, if you never want to stand or have a standing desk then you are likely to find that the regular length arms offer a more compact option.
It’s a true game changer and I really wish I had sought one of these 2 years ago at the start of the Pandemic!
The cost to value ratio is superb.
Really very happy with these arms.
I wanted something that had easy adjustment, allowed me to stand up when I wanted and was stable enough to support a MacBook Pro.
I bought it in conjunction with a VESA laptop mount. It was really very simple to set up and configure.
The desk clamp is especially well designed, maybe these are everywhere but I’ve never seen them before. The design makes for a really stable unit when clamped to a desk.
The laptop mount I ordered attached without issue.
The length of the arms is more than enough to allow for seated or standing use, if you never want to stand or have a standing desk then you are likely to find that the regular length arms offer a more compact option.
It’s a true game changer and I really wish I had sought one of these 2 years ago at the start of the Pandemic!
The cost to value ratio is superb.
purtroppo giunto senza una vite di bloccaggio e la corrispondenza con il venditore non ha risolto il problema. Superato l’ostacolo con il ricorso alla ferramenta sotto casa. Per questo non posso dare un voto pieno.
Ds rception, quelques tests en utilisant les serre joints de montage, calcul des espacements pour l’utilisation des tiges filetes, et pour que les bras puissent tourner sur 360 avec un mur derrire. Puis l’ide de monter galement les moniteurs audio sur bras articuls ! Donc commande d’un bras double supplmentaire 3 jours plus tard, conception et ralisation d’un nouveau systme audio en 2.1 avec satellites clos en lieu et place du 2.0 bass reflex trop lourd et encombrant. Fixations VESA en regard du centre de gravit (a n’existe pas dans la nature), et en respectant quelques conditions de poids et de porte–faux dment dtermines par exprimentation.
Enfin un bureau propre avec un cable management digne de ce nom (avant, c’tait la fort vierge avec faune et flore dveloppe au fil des ans !). Enfin la possibilit de dgager le bazar sur les cts pour faire la poussire !
Enfin des rglages faciles.
Les plus :
– le prix !!! D’ailleurs la diffrence de prix entre bras doubles et simples est incomprhensible !
– c’est solide : base et bras infrieurs en aluminium coul ; bras suprieurs en tle emboutie paisse
– c’est esthtique et discret
– grande latitude de rglage (avec un bmol, voir plus bas)
– le cable management
– les ports USB 3.0 ; en fait, ce sont des prolongateurs de 1.80m dont la partie femelle est serre dans la base ; ce fut une excellente surprise : je n’avais pas vu ce dtail ni dans la description, ni sur le site du fabricant. Ces ports USB conviendront quelqu’un qui a une tour pose sur le bureau, mais seront trop courts si on a un PC sur roulettes sous le bureau (mon cas). Pas grave, au besoin on pourra les remplacer par de plus longs quitte bidouiller un peu.
Les moins :
– en bout de bras, les articulations (en plastique) manquent de “souplesse”. Il faut les serrer fort ce qui les rend un peu difficiles rgler
– on pourra manquer un peu de hauteur si on superpose deux moniteurs. C’tait un peu limite dans mon cas. C’est un problme trs facile rgler si on dispose d’un tour mtaux : il suffit de raliser une rehausse placer entre la base et l’un des bras. Un morceau de rond d’alu, deux chariotages, un alsage, une gorge et deux dressages. Donc si on a un tour ou si on connait un tourneur, a ne cote rien. C’est un accessoire qui pourrait tre propos…
– le marquage surprenant de la vis de rglage du vrin : il faut tourner dans le sens du “-” (sens horaire) pour durcir, et inversement pour assouplir. Curieux…
– les cbles USB sont trop courts. 3 mtres seraient bien plus adapts, quitte payer quelques euros de plus ; ou mieux : des prises A femelles en faade, et derrire des femelles A ou B ou C ce qui permettrait d’utiliser les cbles de son choix. Hack possible…
– les cache-cbles du bras infrieur ont tendance sauter si on tire sur les cbles : ils ne sont pas visss mais juste clipss
– les vis des cache-cbles du haut ne sont pas du type “imperdable”. Tournevis aimant prfrable si on veut viter la crise de nerfs.
Pour les moins, j’ai cherch la petite bte (sauf en ce qui concerne le rglage en hauteur de deux moniteurs superposs).
On l’aura compris, j’adore ce truc. Je n’ai pas t enthousiasm ce point par un produit informatique depuis la Surface Pro 3 (prs de 8 ans…)
Muy buenos materiales y capacidad de ajustarlo al punto desaeado. Solo hay que tener un poco de paciencia y apretar las bisagras hasta conseguir la posicin y el movimiento deseado. Muy buena relacion calidad/precio. Totalmente recomendable.
Selbst fr mich als Laien war das Teil einfach zu installieren, super bebildert. Somit ist auch der deutsche Teil, der in flschlicherweise in englisch verfat war anhand der Bilder leicht zu erkennen. Auch fr schwerere BIldschirme geeignet, super einzustellen auf die entsprechende Hhe und Neigung.
Alles in allem kann ich die Monitorhalterung nur empfehlen.
Vorteile:
+ Stabile Ausfhrung und sichere Befestigung am Tisch
+ Mglichkeit, den Abstand zum Monitor zu vergrern, so dass auch sehr groe Monitore sogar hinter die Tischkante platziert werden knnen
+ Schreibtisch ist aufgerumt und bietet viel mehr Platz
+ Saubere Kabelverlegung in den Schwenkarmen mglich
+ 2 USB Buchsen an der Vorderseite des FUes ermglichen eine einfache USB-Kabelverlegung auf dem Tisch
Ich habe inzwischen wieder viel Platz auf meinem Schreibtisch und kann den Monitor an verschiedene Sitzhhen gut anpassen.
Zusammen mit einer Laptophalterung kann auch der Laptopbildschirm vom Tisch verschwinden und auf die gleiche Hhe mit dem Hauptbildschirm gestellt werden.
Instructions questionable but still very easy to use and make
Took a while to assemble as want to make sure this is done correctly. It’s easy to mistake the wrong end of each section. But once complete, feels very safe holding the monitors. There’s also 2 USB ports at the base.
heavy steel arms. looks like they should last for many years to come. Great flexibilty and range of moveme
Love them. You can adjust the gas pressure in the arms so you can move your monitors with just your fingertips. Moves to almost every angle and I can pull them right to my face if I need to see a specific detail. I game, edit and mix music and audio for video post production. I Edit video content for youtube and stream to twitch so they get used for hours everyday and Ive not had any issues. Not too keen on the cable management but hasnt been an issue.
Love them. You can adjust the gas pressure in the arms so you can move your monitors with just your fingertips. Moves to almost every angle and I can pull them right to my face if I need to see a specific detail. I game, edit and mix music and audio for video post production. I Edit video content for youtube and stream to twitch so they get used for hours everyday and Ive not had any issues. Not too keen on the cable management but hasnt been an issue.
I purchased this item to support two 32 inch Sony TVs. Before actually making this purchase I made some initial enquiries of Invision and was helped by Stephen from Invision Customer Service. Stephen dealt with all of my enquiries in a exemplary and timely manner and was a major factor in my decision to make the purchase.
The unit arrived quickly and was reasonably easy to assemble, reading the manual (I know unusual for a man) helped plus doing a practice assembly of individual parts before the actually assembly was also useful.
I was a bit sceptical as to how the clamps, that are available to fix the unit to the desk, would work in supporting the 2 TVs, (with a Total weight of around 16Kgs), would cope but they are strong and very well made and so far are coping well.
I would not hesitate to recommend this product and also the customer support that I received from Stephen at Invision.
All in all very deserving of 5 stars, I would give 10 if possible!
I purchased this item to support two 32 inch Sony TVs. Before actually making this purchase I made some initial enquiries of Invision and was helped by Stephen from Invision Customer Service. Stephen dealt with all of my enquiries in a exemplary and timely manner and was a major factor in my decision to make the purchase.
The unit arrived quickly and was reasonably easy to assemble, reading the manual (I know unusual for a man) helped plus doing a practice assembly of individual parts before the actually assembly was also useful.
I was a bit sceptical as to how the clamps, that are available to fix the unit to the desk, would work in supporting the 2 TVs, (with a Total weight of around 16Kgs), would cope but they are strong and very well made and so far are coping well.
I would not hesitate to recommend this product and also the customer support that I received from Stephen at Invision.
All in all very deserving of 5 stars, I would give 10 if possible!
En general estoy muy contento con este soporte que me deja la mesa mucho ms limpia de cables y sin los soportes de los dos monitores. Sin embargo est lejos de ser perfecto. Mientras que permite subir y bajar, girar los monitores en muchas direcciones, tiene tambin algunos inconvenientes: para regular la inclinacin se tiene que aflojar un tornillo, regular la inclinacin y voltar a apretar el tornillo (esto me ha sorprendido por la negativa). Si quieres dejar los monitores lo ms lejos posible, cerca de la pared, entonces la mesa no puede estar tocando la pared que los brazos tocan la pared y esto es de nuevo un inconveniente y la nica manera que parece ser posible solucionar esto es agujerear la mesa para tener el soporte a mitad de la mesa y no utilizando los soportes de poner/quitar que se montan en la parte trasera de la mesa.
Supongo que funcionara mejor para mesas ms fondas, cuando se monta el soporte a mitad de la mesa (estropeando la mesa) o cuando la mesa no est pegada a la pared, que en Espaa entiendo que ser en la grande mayora de los casos. Sabiendo de esto, probablemente hubiera comprado antes un soporte de atornillar a la pared
Although this might be a bit of a faff too far to install: once it’s done and finished the result was well worth the effort involved. When you sit back and look at it once it’s installed, you will be delighted. If the cables you have now are a stretch, then you might be better off ordering longer ones, as the cable tidy’s take up a little extra length. Apart from that: it’s all good. Well worth the money.
Very happy with this product, it easily holds two curved 27″ screens at 8kg each. Easy to put together. The screens have 75 x 75 vesa fittings but slightly inset so an adaption was needed, which the manufacture supplied free of charge – the customer service was exceptional. Highly recommended.
Der Aufbau ist etwas schwieriger aber das Produkt berzeugt mit seiner Stabilitt und Anpassungsfhig.
Sehr Empfehlenswert wer noch mehr Fragen hat soll mich auf Discord adden: Zekory#4088
Ich kann mir vorstellen das diese Halterung mit einem kleinen Schreibtisch problematisch werden knnte. Bei mir sind beide Monitore an der Rckwand leider nicht flexibel verstellbar. Vorgezogen funtioniert es gut, daher einen Stern Abzug.
Abbastanza facile da montare, ma una volta fatto veramente stabile anche con monitor di 6 Kg l’uno. Facile da regolare per tutte le angolazioni.
The monitor arm is great. I have 2, 27″ monitors and is solid and totally secure. The usb slots in the front are a great feature as well. Very sturdy and secure on my desk
Beim auspacken sind auerdem zwei kleine Lackschden aufgefallen, dafr gibt es in der Qualitt einen Stern Abzug. Jedoch sind die Schden so minimal, dass man sie kaum sieht und im eingebauten Zustand sind sie nicht zu sehen.
Auerdem htte der Hersteller die gummierten Aufkleber mit dem Namen weg lassen knnen, da sie teilweise etwas schrg aufgebracht sind.
Zwei Hinweise habe ich noch:
1. fr Monitore wo die Stecker 90 grad von der Rckseite abstehen ist es je nach Modell nicht mglich den Monitor auf einer Achse mit der tischbefestigung zu bringen, sofern der Tisch nah an der wand steht. Siehe Bilder. Das problem kann jedoch mit abgewinkelten Kabeln umgangen werden.
2. Zudem muss noch die Zeit zeigen wie die Gasfedern altern und ab wann sie regelmig nachjustiert werden mssen.
I got this to free space up some space from desk, very happy wit the result, and holds my 32 inch monitors very easily
A really good option at a very attractive price. No flexing or stability issues with my two 27″ screens attached.
Really nice product, super well packaged and very nicely built. Super impressed with the build quality.
Sadly, I couldn’t make use of it’s features of two arms on one dual desk mount to get my monitors to touch in the middle. My desk is against a wall and the lower arms need to hang over the back of the desk or the upper arms come a little too far forward over the desk, which then makes the monitors too close.
The Seller was super helpful all the way through and even suggested some other positioning, but my desk being against a wall was the problem.
An easy solution though, I’ve returned this dual monitor arm stand to buy two single arms from the same seller so I can get my particular monitor set up. to work on my 2 metre wide desk.
A perfect solution, and now the new set up which only took 10 minutes to install both is already in place and being used.
A super product, well made and finished, easy to adjust and fit, with all the accessories and tools needed for fitting. They look great and hold my two 27″ Mac monitors just fine.
Superb Customer service, and speedy delivery.
I’ll certainly use this supplier again in the future.
Thank you Invision. 🙂
The product was delivered earlier than it was estimated on Amazon. Arms are quite good, and looks very sturdy! I was worried about my Samsung Odyssey G7 27″ being curved, but the arms hold it very secure. When I type on my mechanical keyboard on the desk (I am using clamp attachment to fix the monitors) the monitors do not move at all, which is quite important in the choice of monitor mounting. I will later build a desktop system for my girlfriend, and repeat this purchase for her as well! Recommended!
Really nice product, super well packaged and very nicely built. Super impressed with the build quality.
Sadly, I couldn’t make use of it’s features of two arms on one dual desk mount to get my monitors to touch in the middle. My desk is against a wall and the lower arms need to hang over the back of the desk or the upper arms come a little too far forward over the desk, which then makes the monitors too close.
The Seller was super helpful all the way through and even suggested some other positioning, but my desk being against a wall was the problem.
An easy solution though, I’ve returned this dual monitor arm stand to buy two single arms from the same seller so I can get my particular monitor set up. to work on my 2 metre wide desk.
A perfect solution, and now the new set up which only took 10 minutes to install both is already in place and being used.
A super product, well made and finished, easy to adjust and fit, with all the accessories and tools needed for fitting. They look great and hold my two 27″ Mac monitors just fine.
Superb Customer service, and speedy delivery.
I’ll certainly use this supplier again in the future.
Thank you Invision. 🙂
El soporte lleg rpidamente y en buen estado. El montaje es muy sencillo (no llega a 10 pasos) y el soporte es robusto y muy flexible. Se puede montar perforando la mesa, o bien, sujetndolo mediante dos potentes abrazaderas. Mi eleccin fue lo segundo. Se pueden colocar los monitores totalmente al gusto (en mi caso, tengo 2 de 22″). Me sorprendi la potencia de los brazos. Est claro que pueden sostener monitores bastante ms pesados. He tenido que reducir la tensin sustancialmente.
A tener en cuenta, no obstante:
– NO tengo la mesa contra una pared. Eso me permite colocar los brazos de forma que salen hacia atrs 20 cm (al mximo)
– Algunas personas que lo han visto montado en mi escritorio me indican que lo perciben “aparatoso”. Es un tema muy personal y relativo a la decoracin del espacio. Entre gustos…
Holds 2 x 22″ screens securely, easy adjustment with no unwanted movement otherwise. Only observation is that there is limited ability to move screens further away /closer without adjusting height.
OK so I purchased this when on a special deal but I just got lucky, had I paid an extra 15 I’d have had no complaints as this is a very well designed and substantial monitor arm. No problems with my dual 24″, but 24″ is probably the lightest I’d use with these gas arms – you can adjust down the compressed gas support but I was almost at minimum for my screens.
Only slight niggle and only likely to be a problem if you’re clipping to certain types of table (rather than desk) is that if your table has a box apron/skirt underneath then you may find that you can’t easily get the mount to sit flush with the table edge as the triangular tightening clamps are too close to the skirt for then to be turned and effectively tightened, it would have been better if the plastic hand tighteners clipped onto bolt heads that you could use if the space below the table was limited, thankfully I could ‘just’ get enough thread tension but I had to then forcibly slide the clamp sideways. Had I not succeeded with that approach I’d have had to cut the heads off the tensioners to reduce their diameter.
Other than that one minor gripe I’m very happy with these mounts and count them as extremely good value.
Really sturdy, i have a 32″ and a 24″ on it, didnt drill through the desk, but the clamps are really good. Lovely and versatile when it comes to moving the monitor around.
OK so I purchased this when on a special deal but I just got lucky, had I paid an extra 15 I’d have had no complaints as this is a very well designed and substantial monitor arm. No problems with my dual 24″, but 24″ is probably the lightest I’d use with these gas arms – you can adjust down the compressed gas support but I was almost at minimum for my screens.
Only slight niggle and only likely to be a problem if you’re clipping to certain types of table (rather than desk) is that if your table has a box apron/skirt underneath then you may find that you can’t easily get the mount to sit flush with the table edge as the triangular tightening clamps are too close to the skirt for then to be turned and effectively tightened, it would have been better if the plastic hand tighteners clipped onto bolt heads that you could use if the space below the table was limited, thankfully I could ‘just’ get enough thread tension but I had to then forcibly slide the clamp sideways. Had I not succeeded with that approach I’d have had to cut the heads off the tensioners to reduce their diameter.
Other than that one minor gripe I’m very happy with these mounts and count them as extremely good value.
First things first, absolutely top class customer service from the seller. This arrived without one of the small screws required to stop an arm from flying around freely. Not an emergency but I did need it asap. I emailed the seller (Invision) on Friday and they were on it instantly, promising something in the post a few days later. The next morning I received the screw, with a note from the General Manager saying that due to home working and to make sure I had a speedy resolution, he had removed it from his unit! Can’t ask for more than that, thanks David!
The kit itself is really good and exactly what I needed. It is definitely made for larger monitors (my 24″ ones are a bit too light to get into the exact position sometimes, even with full tension on the arm adjustment) but if you need a higher/longer gas-lift arm as i did, this is a top choice. The instructions are a bit rubbish in places but if you just look at the pictures and use some common sense, it’s actually a really quick build.
I wish I’d bought this ages ago, really solid bit of kit from a top class seller!
First things first, absolutely top class customer service from the seller. This arrived without one of the small screws required to stop an arm from flying around freely. Not an emergency but I did need it asap. I emailed the seller (Invision) on Friday and they were on it instantly, promising something in the post a few days later. The next morning I received the screw, with a note from the General Manager saying that due to home working and to make sure I had a speedy resolution, he had removed it from his unit! Can’t ask for more than that, thanks David!
The kit itself is really good and exactly what I needed. It is definitely made for larger monitors (my 24″ ones are a bit too light to get into the exact position sometimes, even with full tension on the arm adjustment) but if you need a higher/longer gas-lift arm as i did, this is a top choice. The instructions are a bit rubbish in places but if you just look at the pictures and use some common sense, it’s actually a really quick build.
I wish I’d bought this ages ago, really solid bit of kit from a top class seller!
ARRIVED ON TIME EASY TO ASSEMBLE, I HAVE 2 32″ MONITORS ATTACHED AND IS SPOT ON
I thought they’d forgot the lower arms, I was having a flap and realised “oh, lift the box out you absolute plum”.
Anyway, safe to say these guns are sick.. Best Screen Mounts I’ve ever used.. I’ve only ever used these but still they’re so good.
You get the option to use a 10ml drill bit to drill through your nice expensive pc desk.. but! That’s even more peace of mind by affixing the mount to your actual desk with a long screw and butterfly nut, it’s so secure so that’s what I did.
They look great! Mind you, it’d probably be advisable to have a bit of swinging space at the back of your desk.
I’ve got mine fairly close to the wall with about an inch gap but they’re doing fine even like that, they’re actually mint.
Got a few pictures to show, screens mounted are a Samsung G7 Oddesy 240hz and a Samsung something something I can’t remember the name of it 144hz.
But they’re both “fairly light”, the wall was bare but now it’s covered in acoustic foam so it looks even better! Cheers!
The setups easy peasy too!
very sturdy monitor desk mount, can mount either with screws or without i chose without and it holds both my monitors perfectly, also the in built wire management is very convenient. also theres 2 usb attachments on the base of the mount which then connect to the pc from the back of the mount. extremely happy with the product would reccomend.
Stabil und fest. Zeugt von guter Qualitt. Mit USB Kabeln versehen.
Einstellungen passten bei mir aber leider nicht
Bei zwei 32 Zllern muss der Stnder in der Mitte sitzen.
We have recently moved and therefore it took a while before I could properly test this, but i am very happy with the quality. It’s sturdy and versatile. It keeps the monitors in place safely at the same time as they are very easy to move. I use the monitors next to each other and they fit perfectly. Recommended
Very easy to assemble, one of the arms came with a lot of grease/oil on it but some alcohol took care of it. but works without failure so far. easy to manoeuvre without any sagging or raising once balance is set.
solid product, would recommend
Big and sturdy and delivering a lot of adjustability. These monitor arms are all you will need for your dual screen setups.
They are heavy but this to me is a good indication of their quality and the fact that you can be re-assured that you will be able to mount dual monitors without risk. Just make sure you have a desk which is sturdy enough to handle them
The product itself was quite time consuming to make but the product itself is great. All tools come with the product minus a screw driver for the vesa mounts themselves. The arms are sturdy and have a great range of motion. The flexibility of how you install and also how you set the arms up with the gas arm is incredible.
Great product highly recommended.
The main function of the monitor arms is excellent, the cable tidies, the range of movement and sturdiness is perfect for what’s necessary. However there is two USB ports of which one doesn’t work which has hindered my review a little. All in all a good product would be 5 stars if both USBs worked.
The main function of the monitor arms is excellent, the cable tidies, the range of movement and sturdiness is perfect for what’s necessary. However there is two USB ports of which one doesn’t work which has hindered my review a little. All in all a good product would be 5 stars if both USBs worked.
Everything about this thing feels like it’s going to last – it is silent, sturdy, easy to use and set up, and its base clamp is tall enough to accommodate my less than ideal table.
Sturdy construction, good build quality, easy cable management system
The only thing that up set me with this monitor arm is the blue usb extension cables, MAKE THEM BLACK please
But I’m a very happy custome
I used the clamp mounting system to install mine and It works excellent. The monitor arms are incredibly sturdy, adjustable and are high quality.
The brackets are sturdy and well put together. I have a 28 inch monitor on each and they sit nicely with a good range of movement. I used to have both monitors on stands which took up a great deal of space. Now I have loads of space ! Superb bit of equipment.
Good solid design and quite easy to fit using the included dual clamp. It is made for larger screens of 27 inch and bigger as my smaller 24 inch monitors look small on this bracket.
The USB3 extensions, built into the base, were not great and overloaded my USB3 ports on my PC. This may not be the case for other customers?
Overall a much tidier desk and my posture is much better now so I am a happy customer.
Good solid design and quite easy to fit using the included dual clamp. It is made for larger screens of 27 inch and bigger as my smaller 24 inch monitors look small on this bracket.
The USB3 extensions, built into the base, were not great and overloaded my USB3 ports on my PC. This may not be the case for other customers?
Overall a much tidier desk and my posture is much better now so I am a happy customer.
Bought this for my partners birthday, he’s been researching and hunting for over a month so when he asked for this, I was ready to buy, fitted easily, very sturdy, fully adjustable all throughout, it’s now holding a very large, very heavy 34inch ROG monitor with no issues. Seems quality made and has very smooth movements. Had fittings for it we want to install through a desk also. Cable management aspect is nice, though I would still suggest some cable tidys at the bend, probably not needed but makes it look more tidy.
Once in situ, you just mount your monitors using the VESA adapters and then, critically, adjust the gas assisted arm to get the weight right. This is about getting a zero balance, so that the monitors both hold their position but are easy to manoeuvre. When set-up correctly, it makes adjusting the monitors simple.
There are two pre-attached USB 3.0 cables, making connectivity easy. However, I do wonder why they do not also include pre-installed HDMi or DP ports on the back as well. It would keep the cables nice and tidy and out of the way. However, there are clip-off panels along the arms, which allow you to hind the cables.
Personally, I think this is a great kit and allows the attaching of screens up to 32″, with a VESA fit of 75mm or 100mm and a Max weight of 12kg. Having has non-gas assisted ones before, using this type is so much easier and worth paying the extra for.
I hope you found this review & photos interesting, informative, and useful. Thanks for reading.
My stand was too big for my desk and this has give me more room to work with. Really pleased with my purchase, a good quality product!
Great stand, made well and plenty of ways to mount to your desk.
This monitor stand is brilliant as it holds my monitors easily and I have had no problems with it.
I would totally recommend this stand as its one of the best ones I have purchased.
But….
If you are thinking about putting them in vertical way, you can almost forget about it, it bearly fits with 2x27inches monitors. I needed to squeez them and lose a little of bottom line (fortunatelly thats where windows bar is positioned).
So horizontally – best choice, get it, is best price for the value. Vertically – you need to find another.
I was previously using a dual monitor mount with a normal stand but the stand was quite big and it was difficult to adjust the monitors because of the weight. This dual monitor mount makes things so much easier. The gas assisted arms and easily moveable meaning I can easily adjust the monitors to my ideal position. The desk bracket makes my desk look much cleaner and gives me more space as I no longer have a big base stand taking up loads of space. It’s a real good high quality and sturdy monitor arm and it’s perfect for dual monitor setup.
But….
If you are thinking about putting them in vertical way, you can almost forget about it, it bearly fits with 2x27inches monitors. I needed to squeez them and lose a little of bottom line (fortunatelly thats where windows bar is positioned).
So horizontally – best choice, get it, is best price for the value. Vertically – you need to find another.
The base has two standard USB sockets attached to leads which can be connected to a computer(s).
Very good quality, “does what it says on the tin” and in my opinion a good buy.
EDIT: I contacted to CS and received another arm to replace the not working one.
I believe the most important thing is that they have very good customer services and I would definitely work with this company again.
5*
The freedom to move your monitors up and down with complete ease compared to the usual pole mount method.
Extremely robust once setup giving peace of mind your monitors are safe.
USB’s on the base of the unit.
Well priced.
Cons:
Takes a bit of setting up compared to others on the market.
The USB’s are only extension, not an actual hub.
In terms of stability, it has also got some sort of gas strut counterbalances that provides a flexible viewing angle that eventually turns into a comfortable viewing experience. My screens are hefty, but they have managed to tackle them easily. It is now easy to get both the portrait and landscape orientation through monitors.
With this MX900 monitor stand, I am using it to hold gigantic monitors without any significant issue at all. This also gives a wider viewing angle and this is also pretty flexible that doesn’t take a lot of effort to adjust the screen at all. Overall, I am completely satisfied with this dual monitor stand, to be honest.