playvital Full Set Protective Skin Decal for Steam Deck, Custom Stickers Vinyl Cover for Steam Deck Handheld Gaming PC – Black White Camouflage
Product Feature:
- Specially designed for Steam Deck, personalized decal decorates and beautifies your whole set gaming device.
- Made of high-quality adhesive vinyl stickers, and goo-free removal, it won’t cause any damage to the surface of your device.
- Well-protected your device from accidental scratches, bumps, or fingertips of daily use.
- Precise cut-outs of ports and gaps position, no interference with buttons, analog thumbsticks, or trackpads.
- All features are accessible without interference and do not affect the haptic feedback during the game session.
- Smooth touch in hand, adding comfort while holding your gaming device.
- Can be installed without difficulty, and an installation video guide is provided on YouTube. If you need help, please feel free to reach out to us.
Package Includes:
- 2 set of skins for Steam Deck
Note: only includes the protective skin, the handheld device is not included. Designed by gamers. The skin decal Patented. Protected by issued and pending patents. PlayVital All rights reserved. All other trademarks are the property of their respective owners.
| Dimensions: | 25 x 5 x 7 cm; 18 Grams |
| Model: | SDTM014 |
| Manufacture: | PlayVital |
| Origin: | China |
It’s really a great product for it’s price. You get two for $16. So you have an extra to keep or incase you messed up.
I suggest you watch the dbrand tutorials because it is easier and better. Be patient and use hair dryer to make sure it will melt and blend with the Deck most especially the front bottom and top part of the screen.
The quality is great for it’s price (it’s not 3M). I tried Dbrands on my phone but this is literally $8 for one whole set vs $50 from Dbrand.
It’s better thank nothing but lacks in few ways, still would recomend price wise.
Applied without a problem , 2 decals in the package which is nice to have, only issue I am having is that decal strip on bottom and upper edge of screen keeps peeling away , have to constantly keep pressing it back which is annoying , maybe not sufficient glue ,otherwise good produc
A quick review.
Pros:
-comes in pack of two
-fairly easy to re-adjust
-rugged quality vinyl
Cons:
-low DPI prints, blurry even
-some areas won’t be flat, hairdryer method of adding heat recommended
-not easy to remove backing
-not a full decal skin, lots of empty space
-vinyl cut is 95% accurate, some cuts like touchpad, rear buttons and edges are far from a close match
Overall, it’s fine. I use this skin under a case so I didn’t care as much about the fitment and where some edges may be exposed. It’s not great but for an inexpensive vinyl kit, it’s fine. It was $16 Canadian at the time of purchase
Installed under a TPU cover. Wanted something that felt good and worked well. Having 2x for the price is a definite plus – the LR4/5 and touchpad covers feel like they’ll eventually pop off due to the slight raised edges. Everywhere else they’ll give the splash of color I wanted and stay adhered as expected. Feels good and looks good, I’m happy with my purchase.
what I dislike – some parts of the skin was hard to remove from the wrapper.
This is great. It took me about 15 minutes from start to finish. Be sure to clean the deck thoroughly prior to application. As you apply, keep things lined up with the edges, and be SURE to use hair dryer on medium setting to help all corners and edges to lay down. Heat with hair dryer and press/rub until the entire skin is well adhered.
HIGHLY RECOMMENDED – This is a real review, not paid, nor endorsed.
I watched a lot of YouTube videos about skins for the Steam Deck, and I thought getting one would be a good investment, even if it wasn’t that great, it would protect the Steam Deck from scratches and stuff.
Some YouTubers were raving about D-Brand. So I checked them out and found a nice skin. When I went to go checkout, they wanted me to sign up and create an account. Why the heck would I want to give you my personal information for a one-time purchase? Makes no sense. So I bought this product, not expecting much since it was so cheap, but WOW!!
The instructions say to use a hair dryer and such… I wasn’t about to do that with my new Steam Deck. So I installed the skins room temperature. It went on perfectly! It looks really amazing, the touch pads are still very sensitive, and overall it gives my Steam Deck a nice uniqueness about it.
Highly recommended! PlayVital skins are amazing!
la skin (due identiche fronte/retro sn presenti nella confezione) di buona qualit.
L’installazione facile e l’adesivo applicato ti permette di riposizionare la skin nel caso nn sia allineata con il frame dello steam deck.
tre commenti :
– mind the gap: in riferimento allo spazio tra la skin anteriore e quella posteriore nella parte inferiore dello steam deck (guardare la foto), ci sono diversi millimetri di distanza, anche se non danno fastidio
– la scelta di non coprire il grip dei joypad azzeccata, molte skin vanno a creare diverse pieghe a causa della rotondit del dispositivo
– nonostante abbia cercato di eliminare le “rughe” (fare riferimento alla foto con la zona evidenziata) con una pistola termica, non c’ modo di fare aderire la skin meglio di cos. il problema si presenta sia sulla destra dei pulsanti XYAB, che sulla sinistra della croce direzionale
In generale un buon prodotto per il prezzo a cui venduto
Rating Update: I’m changing my review from 5 to 4 stars because I’ve noticed that the adhesive at the bottom of the screen is peeling away from the Steamdeck. I followed instructions and yet it keeps lifting away from my steamdeck. I kept pressing and adjering the sticker. However, its annoying that it does this. See photos. In the end, I decided to take my scissors and just cut the top and bottom strips off. They were peeling away from my Steamdeck and it was truly annoying to see. Also, I cut a small line in between the two back triggers because keeping them was a hassle to install. In the end, still pretty decent to look at.
Rating Update: I’m changing my review from 5 to 4 stars because I’ve noticed that the adhesive at the bottom of the screen is peeling away from the Steamdeck. I followed instructions and yet it keeps lifting away from my steamdeck. I kept pressing and adjering the sticker. However, its annoying that it does this. See photos. In the end, I decided to take my scissors and just cut the top and bottom strips off. They were peeling away from my Steamdeck and it was truly annoying to see. Also, I cut a small line in between the two back triggers because keeping them was a hassle to install. In the end, still pretty decent to look at.
Rating Update: I’m changing my review from 5 to 4 stars because I’ve noticed that the adhesive at the bottom of the screen is peeling away from the Steamdeck. I followed instructions and yet it keeps lifting away from my steamdeck. I kept pressing and adjering the sticker. However, its annoying that it does this. See photos. In the end, I decided to take my scissors and just cut the top and bottom strips off. They were peeling away from my Steamdeck and it was truly annoying to see. Also, I cut a small line in between the two back triggers because keeping them was a hassle to install. In the end, still pretty decent to look at.
This product looked really good in the end, despite the alterations I had to make. However, you do need a steady hand and patience in order to ensure a very nice adherence to the Steamdeck.
Rating Update: I’m changing my review from 5 to 4 stars because I’ve noticed that the adhesive at the bottom of the screen is peeling away from the Steamdeck. I followed instructions and yet it keeps lifting away from my steamdeck. I kept pressing and adjering the sticker. However, its annoying that it does this. See photos. In the end, I decided to take my scissors and just cut the top and bottom strips off. They were peeling away from my Steamdeck and it was truly annoying to see. Also, I cut a small line in between the two back triggers because keeping them was a hassle to install. In the end, still pretty decent to look at.
This product looked really good in the end, despite the alterations I had to make. However, you do need a steady hand and patience in order to ensure a very nice adherence to the Steamdeck.
Rating Update: I’m changing my review from 5 to 4 stars because I’ve noticed that the adhesive at the bottom of the screen is peeling away from the Steamdeck. I followed instructions and yet it keeps lifting away from my steamdeck. I kept pressing and adjering the sticker. However, its annoying that it does this. See photos. In the end, I decided to take my scissors and just cut the top and bottom strips off. They were peeling away from my Steamdeck and it was truly annoying to see. Also, I cut a small line in between the two back triggers because keeping them was a hassle to install. In the end, still pretty decent to look at.
-2 skins for less than half the price of one Dbrand skin
-Easy apply
-Nice texture to skin
-East to apply
Cons
-Doesn;t wrap around back grip
-No front grip coverage
-Only 4 screw cut outs in back, there are 8 steam deck screws in back
Overall very happy with this purchase!
Fit was decent. Material good quality. For the price not bad. I’ve had worse.
Prodotto di qualit e molto bello una volta finito di attaccare. Molto faticoso a separare il skin dell’ foglio su quale viene attaccato, perso pi di mezz’ora solo per questo. L’ultima cosa sarebbe che secondo me il taglio non proprio perfetto, magari invece e solo colpa mia visto che la prima volta che uso questo tipo di skin. In essenza un buon prodotto con piccole cose da migliorare.