Russell Hobbs RHSCH601B 60cm Wide Black Steel Chimney Cooker Hood, Free 2 Year Guarantee [Energy Class D]
Russell Hobbs RHSCH601B 60 cm black cooker hood, with LED light
With a sleek black housing, this cooker hood is sure to look stylish in your home. The clearly displayed push button control is easily accessibly making it simple to use whilst the classic wall mounted design will look sleek in your home whilst ensuring minimal space is taken up.
This Russell Hobbs cooker hood gives you the option to use ventilation via extraction or re-circulation. Re-circulation venting draws steams and smells into a filter which neutralises the odours, before being returned to the kitchen, whereas, extraction ventilation filters air with a grease trap before releasing it through an external vent. Having both these styles of ventilation gives you increased versatility and ensures you can alter your cooker hood to best suit you, at the easy touch of a button.
| | | |
|---|---|---|
| | | |
Product dimensions of this cooker hood are: (H)68.0 -96.0cm x (W)60.0cm x (D)50.0cm
For increased convenience, this black chimney cooker hood has 3 speed settings and 2 LED light bulbs. This will ensure that you can alter the speed of your hood to best suit you, so you can always be sure your kitchen will be thoroughly smell and smoke free. The LED light bulbs will clearly illuminate your cooking for ease of use whilst the long last LED bulbs are also energy efficient.
The RHSCH601B has ventilation through extraction and recirculation giving you the utmost versatility as you can easily change the ventilation at the touch of a button. Recirculation venting draws steams and smells into a filter which neutralises the odours, before being returned to the kitchen, whereas, extraction ventilation filters air with a grease trap before releasing it through an external vent.
This wall mounted cooker hood is connected to the power through the mains, making it incredibly easy to just plug in and go. This also means that the cooker hood can be used in a number of different areas within your kitchen for increased versatility.
This cooker hood has a lighting efficiency rating of A, a grease filtration efficiency rating of C, a fluid dynamic efficiency rating of E and an energy efficiency rating of C.
This black Russell Hobbs cooker hood has a maximum extraction rate of 440 m³/hour, perfect for a kitchen of approximately 44m². As the average kitchen is approximately 21m², this cooker hood is sure to be perfect for your home.
The RHSCH601B comes with an aluminium filter to ensure that your cooker hood continuous to efficiently remove odours for even longer. The filter on this Russell Hobbs hood is washable and can even be cleaned in the dishwasher saving you time and effort.
| Weight: | 10 kg |
| Dimensions: | 60 x 50 x 96 cm; 10 Kilograms |
| Brand: | Russell Hobbs |
| Part: | RHSCH601B |
| Colour: | Black Stainless Steel |
| Batteries Required: | No |
| Batteries Included: | No |
| Colour: | Black Stainless Steel |
his is a well constructed hood 3 nice mesh fighters that are easy to remove and clean quite powerful ensure it is well secured, so as to avoid vibration noise , ive ordered a spare light just in case as its a complete fitting .
The cooker hood is exactly as described, which was perfect for me as I wanted a like-for-like replacement for the cooker hood in our kitchen that had failed (a different brand but essentially the same hood). This hood is however a little noisier than the item it replaced although it does work well. I had cause to contact the seller as the first deliver was the wrong unit. They were very friendly, helpful and did exactly what the promised to do when they said they would. One slight issue I have with the unit potentially though is the lighting; it’s very good, but if it fails you cannot simply change a lamp but rather you have to replace the whole module according to the user manual – let’s hope the lamps have a long life
This was a replacement hood. The original vent outlet was smaller than new hood ducting. Bought new 100mm ducting and a reducer for about 5 from a local supplier. Fixed with duct tape that came with the hood to join the two ducts. Removed a row of tiles as the hood was deeper than my old one. Put a new vent flap on the outside as well to stop the wind blowing through as it had been doing for ten years. The plug was sealed so I cut this off, reduced the cable length and hard wired it back in. Added a new glass splashback beforehand to get the correct measurement for the hood bracket. The hood’s front bright LED lighting is fantastic, as this is where you need the light when using the hob. The venting is powerful. I am very pleased with this purchase. Worked carried out by 1 person.
Quick delivery via Prime and well packaged.
I was replacing an existing extractor so my position on the wall was determined already by the cooker backsplash. I taped the bracket onto the hood and offered it up to the backsplash resting it in position on top of it marking the holes needed. I figured that dead reckoning would have been inaccurate. Of course, if you have freedom of vertical position then you can just attach the wall bracket and away you go.
I would recommend screwing the chimney fixture screws into the bracket before putting the bracket on the wall as they are self-tappers.
The extractor comes with a moulded plug so fit a socket in the chimney area if you haven’t got one.
The extractor is 150mm in diameter and my existing one was 100mm so I needed a spigot adaptor
https://www.amazon.co.uk/dp/B00H510IH2?psc=1&ref=ppx_yo2ov_dt_b_product_details
Fast customer service as it came slightly dented which knocked one of the spot lights slightly out and they said they’ll give me a replacement so I’ll keep you informed
This hood is strong and stylish. You can have it vented or just use carbon filters and have it recirculate the air. It doesn’t come supplied with carbon filters so you’ll have to phone Russell Hobbs and get them sent to you. It takes two filters which worked out at 19.99. They should last 6 months on normal usage. My builder had no problem installing it. It has a very good light and 3 suction power settings. A very good buy!
Does the job and was a not bad price. Fits in to the new kitchen nicely.
Great hood easy to fix, does a very good job.
Great value, bought from Amazon marketplace. Tiny dent in frame but works perfectly. Looks good, great purchase