4K Wireless HDMI Extender, 4k@30Hz Wireless HDMI Transmitter and Receiver Support Full HD – full house coverage – loopthrough – watch TV anywhere TV DVR Set-Top-Box Computer Extention Up to 656f
- HDMI extender transmits HD audio signals through wireless WI-FI. At the same time it supports infrared remote control back to control function.The device has excellent image processing and transmission capabilities and can make signal transmission more smooth and stable, it is a cost-effective HDMI signal transmission device.
- Wireless transmit HDMI signal, wireless transmission distance can up to 200m under the environment without interference;Support remote control back to control the video source;Built-in ESD electrostatic protection circuit, all-round protection system security;Easy to install, plug and play, no need to set;on circuit, all-round protection system security;
- This wireless HDMI extender wirelessly sends HDMI A/V signals up to 660 feet(200m) through line-of-sight environments; works with most HDMI-equipped devices, including blu-ray players, set-top boxes, AV receivers, cable/satellite boxes, and computer systems.
- Adjust the specifications automatically for different line of sight distance 1-660ft to achieve the best display.
- Support 20-60KHZ infrared emission, implant infrared signals into wireless signals, and remotely control reachable devices (such as TVs, projectors, etc.)
- 4K wireless HDMI Extender is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. for example you can watch television again in the hot tub outside and About 110 feet from the house to the pool and it functions flawlessly. Meet daily needs and increase happiness5
- G high-frequency wireless transmission,the received image is clear and stable,give you a better visual experience.S
- upport 20-60KHZ infrared emission, implant infrared signals into wireless signals, and remotely control reachable devices (such as TVs, projectors, etc.)H
- ousing Materials: MetalW
- ireless Standard: 802.11acW
- orking Humidity: 5% – 90%S
- ize of Each: 18cm x 3cm x 9cmO
- peration Temperature: -5℃ +70℃W
- ireless Transmission Frequency: 5GHzH
- DMI Connector: 19-pin, Type-A, femaleM
- ax Resolution Support: 3840X2160P@30HzS
- upporting Compliant Standards: HDMI 1.3I
- nfrared Remote Control Frequency Range: 20 ~60KHzM
- ax Wireless Transmission Distance: 200m (barrier-free)
Installation Steps
1. Connect HD cable first, connect signal source to Sender (transmitter) IN input, and connect the local display device to Sender (transmitter) LOOPOUT output;
2. Connect the Receiver end of the extender to the remote display device (such as TV and splicing screen);
3. IR function: Please align the transmitter’s IR end of the extender with the IR receiver end of the signal source that requires to be controlled, and make them close to each other.
| | | |
|---|---|---|
Use in meeting roomsPlug and play, no need to install drivers, 5G transmission of high-definition video and audio, and achieve wireless meetings. | Use in the hallIn the hall, wireless transmission can be achieved without worrying about wiring problems in the conference hall. | Used in the monitoring roomIn the monitoring room, just connect this wireless transmitter to receive! Reduce the trouble and cost of installing cables and set-top boxes. |
 |  | |
|---|---|---|
| Max resolution support | 1920×1080P@60Hz | 3840X2160P@30Hz |
| video resolution | 1080@60 | 4k@30HZ |
| Wireless transmission frequency | 5GHz | 5GHz |
| Frequency Range of IR | 20 ~ 60KHz | 20 ~ 60KHz |
| Transmission Distance | 200m (barrier-free) | 200m (barrier-free) |
| Working Temperature | -5℃ – +70℃ | -5℃ – +70℃ |
| Working Humidity | 5% ~ 90% | 5% ~ 90% |
| Weight: | 910 g |
| Dimensions: | 24.1 x 15 x 9.1 cm; 910 Grams |
| Part: | ShuOne |
| Colour: | Blue |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | ShuOne |
| Colour: | Blue |
| Quantity: | 1 |
| Reference: | ShuOne |
My husband works from home and we needed a better internet connection at home. This wireless extender are perfect for a big house and a big family. The internet connection works a lot better now, very easy to assemble and to install. Compact and durable material. Now everyone have a great connection at the same time.
200m range using good indoor antennas as a pair on the 5.8GHz band. 4K HD transmission which is very high quality and worth every penny of its price. 4K @ 30 Hz and offers a loop out so local display is possible. I really like the remote IR extender feature which returns the 20 to 60KHz IR signal back to the TV monitor, projector etc. This product is very well designed reflected by seemless integration of complex setups made effortlessly and without complex menu options/ configuration pages. It truly is plug and play. Handling all the complexity from you, you just pick the location of the extenders and plug the HDMI cables in and tge power supplies. Truly is that simple. These are complex well manufactured u its and highly recommended, Andrew
I have installed two of these devices for friends who both live in the same development as I do. In both cases the aerial outlets installed by the developers were not situated close to where the owners wanted to install their TV and moving the outlets would be difficult and expensive as the buildings we are in are Grade 2 listed. In the first case the TV and the outlet were on different walls within a large living room and the unit was used to connect a Freeview Receiver to the TV. The installation was straightforward and because all was in the same room it was not necessary to use the infra red link. The only problem so far has been that the link suddenly stopped working and after a lot of plugging and unplugging cables the cure was the old chestnut of powering off the HDMI receiver and powering it back on again! In the second case we needed to transmit from an aerial outlet in an upstairs bedroom to another bedroom on the same level that was to be used as a snug. This time it was a Freesat recorder connecting to a TV. I had enormous problems with the first unit that was delivered and could not get any picture at all on the TV. After installing the units in my own home within the same room with no success either I came to the conclusion that one of the units was faulty. I returned the units, reordered and got the replacement units working quickly including the infra red remote connection. As I said in my headline the leaflet that comes with the units is very sketchy, if the connection is not working a diagram appears on the TV screen but there is no explanation of what the various elements of the diagram mean. For example it includes two measures of signal strength but doesn’t make it clear that one is actual and that the receiver is actually picking up a signal from the transmitter unit.
walls and keeping the doors open all the time. The receiver and transmitter quality seem to be very good, but the antennas look cheap. If the walls obstruct the signal, or the receiver is located downstairs, and the transmitter is on the first floor, then the signal is not very good, and the image quality is a big disappointment. I do recommend these 4K wireless HDMI extenders for home use, offices, schools, and many other businesses, but for best performance, they should be used in open spaces and avoid obstructions as much as possible.
There are no included paper instructions, though the setup and use of these is practically just plug and play, so I had no issues getting them up and running. There is an online video manual and also a PDF manual if you happen to have issues or get stuck, access to them is via a provided QR code on a small slip of paper inside the box.
Setup is easy enough once you’ve attached the antennas, just power both units and then press the pair button to pair the two together and supply an HDMI input to the transmitter and then link the receiver device with your TV or projector. If you need to send an IR signal you can also plug in the 3.5 mm based IR signal sender and receiver and then your remote will work from the receiver end of the HDMI extender. You can also use the loopback output on the transmitter so that someone can view the same output in the original location and the other room with the receiver can also view the same output.
In a normal house sending the signal from the living room to a bedroom doesn’t seem to show any degradation of video quality or audio, the introduced lag is almost imperceivable and is well within what you would expect for a wireless extender. As a bit of a test I decided to try out sending the HDMI output of my Nintendo Switch to another room and was able to play switch games quite comfortably without any major indication of delay, there was a little which is to be expected, but no worse than say playing an online game with 50 or 60 ping. Depending on distance, usage and building construction you may have better or worse performance, but I was surprised by this honestly. The unit is happily able to pipe 4k content around my house and regardless of where I tested it out the result was always the same, a nice picture with clean audio and very little delay.
The build quality is fine, both units are made from metal and feel quite sturdy. I do wish that the transmitter and receiver had a method for wall mounting them, as they look ideal for hiding away behind a TV or unit, but there is no provided method for mounting unfortunately. The product listing also shows using extension cables with the antennas and mounting them closer to each other to reduce the odds of interference, but there are no provided cables for doing this in the box.
Overall this is a good product that works well, it’s expensive for sure, but a high quality wireless HDMI extender will always cost a good bit of money. This product regularly has coupons and price dips and can be had for anything between 169-200. If you are in the market for an HDMI extender, this is an option for anything up to 4K@30hz.
On opening, this comes with everything required to set the wifi streaming up between two rooms and the main units look to be of a good quality. Along with the two units comes two power adapters which have continental plugs fitted however there are adapters supplied for UK 3 pin sockets, these are a little bulky but they do the job. Also supplied is a magic eye unit for using an infrared remote control in a different room to the device and four aerials that attach to the sender and receiver units, these aerials even match those on my Asus AX11000 router, so that pleases my OCD, lol.
Setting these up was very straight forward and I had them up and running in about 20 minutes. I attached the transmitter to my HD recorder and the receiver to my bedroom TV, the little magic eye I stuck to the side of the TV so that the remote controller could see it in an unobstructed line.
I then turned the recorder on from my bedroom using the remote which worked without an issue and then once I had the correct input selected on the bedroom TV the video and sound came through clearly and was in total sync with each other.
I have only tried this with 1080p and 720p as thats how my HD recorder works but the video at those levels was lovely and clear. I have a fairly high end wifi setup in my home with a great router and two mesh nodes but every now and then I did still get some artefacts on the picture and a little crackling on the sound but that cleared up as quickly as it started and it only happened a few times during a two hour film. This might be down to the shear amount of devices that are on my network so I intend to put this HDMI wifi kit onto its own VLAN to see if that makes it more reliable but I just haven’t had the time to set that up yet.
On the whole this kit works surprisingly well and much, much, much better than a similar set that I had tried and returned several years ago. I would have preferred the power supply to have had UK 3 pin plugs but they can be changed or rewired at some point in the future. Time will tell as to how reliable this kit will be but so far so good and it’s still working well after three weeks of nightly use.
The base units themselves are lightweight and are easy to set up. You use one of them as the sender unit and the other as the receiver. You just connect the sender unit to your source, in my case my PC, via HDMI and plug in the power supply. You also do the same with the receiver unit and plug your HDMI cable into the receiver unit, in my case was a TV in the shed.
You also need to have a fair bit of space for them too as once setup, they are quite big due to the antenna. You can adjust the angle of them, but they will be spread out so don’t have a small footprint.
Using them and they do exactly what they say they do. Mine were going through an old house wall, 12 metres down the garden and through a new build with insulated walls and the picture came through with no problems. I couldn’t see any degradation with the picture and there were no problems with the sound. I was only using the PC on the desktop and tried a couple of movies and it all seemed fine. I tried a couple of games and there was a slight input lag, but I don’t think this unit is intended for gaming since it maxes out at 30hz.
Moving the receiver unit to a different TV was easy enough by unplugging it from the wall and disconnecting the HDMI cable and reconnecting the cables to a different TV. There were no settings to change, and the picture came through straight away. There was a little less lag while gaming, so the distance and strength of the signal do impact the performance of the units, but I think I was really pushing it with my first test down the shed.
In conclusion, this kit is an easy way to send a signal to a different room over a distance. You could use a longer HDMI cable, which would be cheaper, but there is a limitation on how long a HDMI cable can be before degradation occurs and this kit is a good solution to that. The included RF blaster will also be beneficial if this is going to be used with a TV box
Product is as described. Works perfectly. great range. Just make sure there is not tough interference in between else your will loose the range
It is easy to install, but the interval should not be too long. If there is a wall, the signal will be weakened and the picture quality is OK, but it cannot reach 4k. Reverberation often appears. I don’t know how to solve this problem!
I got these as I was very hopeful that it would be able to transmit from my virgin box in the lounge up to my bedroom. The wireless transmission does work excellently but each wall it goes through reduces the signal. Unfortunately for me the the amount and thickness of the wall stopped the wireless being 100%. I instead switched to network cable wired and it was again again perfect. The signal is perfect on the receiver and audio and picture are perfectly in sync.
Worth a try, but depending on distance and materials used in construction of your house, the wireless may not work. In more modern houses, it will likely be more successful as the interior construction is far more light weight.
You get a simple transmitter that you plug your video source into, and then use the pass-through port to go to your usual monitor (if required). Once plugged in it will transmit the video signal.
The receiver just plugs into a second or remote monitor via HDMI and the video is relayed to that in what I can only describe as perfect clarity, with no lag.
You get a small I.R. receiver and transmitter too, and if the transmitter is pointing at your source device (such as a Sky box) then the remote can be used at the other end to pass the signal back. It’s all well and good having a remote video, but being able to control it too is key.
I’ve used this to send signals to my projector that I sometimes set up at the end of the garden. From the T.V. in the lounge it goes through an outside wall and goes a good 100ft (33m) to the projector, with no issues at all.
They don’t seem to be made for the British market as they come wired with a two pin plug so you need to use the adapter plugs which are included. Make the wall socket a bit chunky.
Once you have followed the instruction which are relatively easy to follow little patient and your all good and they really do work Petty good.
Reception is good and picture quality is ok question 4K but very happy with.
Dropped a star due to the lack of instructions.
Die Gerte bestehen aus robustem Material, das kompetent verarbeitet wurde. Sie sind schnell und unkompliziert installiert und dann sofort einsatzbereit. Die bertragung luft im Anschluss durchweg stabil, allerdings mit der Einschrnkung, dass sie nicht mehr als HD” schafft. Ansonsten ist die Bildqualitt gut, obwohl man der Originalquelle gegenber minimale, aber dennoch erkennbare, Abstriche machen muss.
Diese nicht gravierende Latenz zum Ausgangssignal fllt allerdings nur negativ auf, wenn man konzentriert darauf achtet. Nichts auszusetzen gibt es hingegen am Ton, der einwandfrei bertragen wird ohne dabei zu rauschen oder sich zu verzgern. Bisher war der Eindruck mit unterschiedlichen Quellen einheitlich, es ist aber gleichsam nicht auszuschlieen, dass es bei der individuellen Nutzung zu abweichenden Ergebnissen kommt
Fazit: Von ShuOne” gibt es hier eine gute Lsung zur kabellosen bertragung, die lediglich in der bertragung des Bildsignals minimale Schwchen zeigt. Da der aufgerufene Preis der Leistung dennoch angemessen erscheint, kann eine Kaufempfehlung guten Gewissens ausgesprochen werden. Sollte sich whrend der weiteren Verwendung noch etwas an diesem Eindruck ndern, wird es hier nachgetragen.
It’s been quite easy to install, however it will need some space for each device as it’s not really compact and flat so it wanted to keep it behind the TV on the wall or something, it’s going to be a bit hard to find space for it. It’s not huge, but in my case I had to think how to hide it better.
Picture quality didn’t differ from one transmitted by wired connection, even through a wall and also with both devices in the same room so I have to say that signal is transmitted and received very well.
I’d love to try another one for 4K HDR but so far this one is very good, good enough for FHD.
Price is fair, hopefully devices will work for a long period of time, to make it more price worth.
I’m happy with it, no wires hanging, good picture quality and everything goes well.
I spent a long time reading reviews of HDMI senders, and it felt like there were no reliable options out there that didn’t cost a fortune. I didn’t have high hopes for this, but it worked really well. It worked right away. I plugged a Freeview box into the sender and connected the receiver to an HDMI mixer that feeds into my projector, which is on the other side of the room to the Freeview box.
I noticed that a lot of reviews for other HDMI senders say that they are extremely sensitive to positioning and don’t work with any obstacle at all – even just standing between the two boxes. I’m happy to say that this one doesn’t seem to show any such issues. I see no effect on the signal if I stand between the two boxes, hide one box behind an old TV, or even move them around the room while they’re in use.
I knocked off one star from the overall rating because this still feels quite expensive as a way of replacing a single cable.
Per chi non lo sapesse, un trasmettitore Wireless HDMI un apparecchio che prende un segnale audio/video da una porta HDMI e lo trasmette senza l’ausilio di nessun cavo.
Infatti, a volte ci possono essere situazioni in cui si impossibilitati ad utilizzare cavi HDMI, o perch la fonte audio/video si trova distante da un televisore o da un proiettore (ad esempio in stanze diverse), oppure per motivi estetici o pratici, se ad esempio dobbiamo raggiungere un tv appeso ad una parete o ad un soffitto e non vogliamo cavi visibili sulla parete (e non possibili passarli in canaline interne alle pareti).
In questi casi possono essere molto utili i trasmettitori wireless HDMI che, come si pu intuire dal loro nome, utilizzano frequenze Wi-Fi per trasmettere i flussi multimediali, ma non hanno bisogno di una rete domestica Wi-Fi per funzionare (cio non devono essere collegati al router).
Infatti, il collegamento tra i dispositivi diretto e senza intermediari (come nello standard Bluetooth).
Per ridurre le interferenze, che potrebbero disturbare il segnale, i trasmettitori usano molto spesso la selezione dinamica delle frequenze (il cosiddetto “canale”) per trovare quella meno affollata. Infine, molti ricevitori integrano anche un lettore ad infrarossi per captare i comandi dei normali telecomandi.
Un difetto del Wireless HDMI, invece, che ha un po’ di problemi di lag (ovvero il tempo che intercorre tra l’invio di un comando ed il momento in cui si vede l’effetto a schermo): ci vuol dire che va bene per vedere i film, ma non per giocare.
CONFEZIONE
Arriva nel classico pacchetto di cartone al cui interno troviamo:
– 1 x trasmettitore HDMI;
– 1 x ricevitore HDMI;
– 4 x antenne da montare al ricevitore e trasmettitore;
– 1 x cavo IR per il trasmettitore;
– 1 x cavo IR per il ricevitore;
– 2 x alimentatori a muro;
– 2 x cavi per estendere l’antenna.
– 1 x foglietto con codice QR per scaricare la guida (solo in inglese, giapponese e cinese)
CARATTERISTICHE, INSTALLAZIONE E MIE IMPRESSIONI
Nel mio caso, ho optato per questo trasmettitore Wireless HDMI della ShuOne per collegarlo al mio decoder satellitare Dreambox e portare il segnale in una stanza dove non ho impianto sat o digitale terrestre. Ma i campi di utilizzo di questo kit possono essere molteplici: PC, Lettore DVD, PS3, PS4, HD Box, Satellite Box, Android Box, Sky Box, ecc.
Questo modello, HSV811W PRO, supporta una risoluzione massima Full HD, 1080p a 60 Hz (ma anche risoluzioni minori: 480p, 576p, 720p); mentre la trasmissione wireless avviene sulla frequenza 5GHz che dovrebbe garantire meno interferenze.
E’ compatibile con lo standard HDMI 1.3 e con HDCP 1.4 e il consumo elettrico si attesta intorno ai 5W.
L’installazione molto semplice. Innanzitutto vi conviene scaricare il manuale d’uso scansionando il QR Code presente nella confezione. Non in italiano ma almeno potete aiutarvi con le immagini riportate.
Devo precisare che scansionando il Codice QR presente nella mia confezione, sono stato indirizzato alla pagina del modello HSV811W, ma navigando sul sito potete trovare da soli il manuale del nostro modello, il HSV811W Pro.
Per prima cosa dovete montare le 4 antenne (indistintamente 2 su ogni dispositivo) e collegare il trasmettitore e il ricevitore ad una presa di corrente. Un piccolo aspetto negativo che i fili degli alimentatori sono un po’ corti per cui, se non avete una presa di corrente vicino, dovrete ricorrere a delle prolunghe.
Il trasmettitore va posizionato nella stanza dove c’ la sorgente che emana il segnale che volete trasportare (il decoder nel mio caso). Con un cavo HDMI collegate la sorgente con la presa IN del trasmettitore, mentre con un altro cavo HDMI collegate il televisore (nel mio caso) alla presa LOOP OUT.
Nella stanza dove andrete a posizionare il ricevitore, sufficiente collegarlo tramite cavo HDMI ad un secondo televisore.
Una volta collegati entrambi gli apparecchi, basta selezionare dal televisore la presa HDMI utilizzata e il gioco fatto. Entrambi i dispositivi si connettono in automatico sullo stesso canale (frequenza) di trasmissione e potrete vedere il segnale audio/video anche sul secondo TV.
Dalla seconda postazione possibile cambiare canale TV tramite il telecomando del decoder, basta inserire nei jack del trasmettitore e ricevitore i 2 cavi IR in dotazione (fate attenzione a metterli in modo corretto in quanto non sono intercambiabili, ma uno esclusivamente per il ricevitore e uno per il trasmettitore).
Ho visto che esistono in commercio alcune tipologie di trasmettitori wireless HDMI che possono supportare pi ricevitori contemporaneamente, ma non il caso di questo modello, che invece supporta l’installazione di pi kit nello stesso ambiente senza causare interferenze di segnale. Infatti possibile installare fino a 4 coppie (trasmettitore + ricevitore) servendosi di diversi canali (frequenze) che sono visibili dai display di cui sono dotati.
La casa produttrice dichiara che possono coprire una distanza di circa 200mt. Io non ho testato se queste misure siano realmente veritiere ma, nel mio caso, posizionati in 2 stanze diverse e ad una distanza di circa 5-6 metri (con 2-3 muri interposti) si comportano davvero bene.
Infatti, la qualit audio/video, per il mio utilizzo, ottima: l’immagine fluida e stabile con colori chiari e nitidi; anche l’audio pulito e sincronizzato col video. Anzi sembra di avere il decoder collegato direttamente alla tv ricevente.
Nel mio caso non si avvertono lag, ma io non utilizzo questo sistema per il gaming.
Questa estate ho utilizzato questo kit anche collegando il decoder ad un proiettore in giardino per vedere le partite degli europei di calcio e anche in questo caso ne sono rimasto soddisfatto.
L’unica cosa che ho notato che tendono a surriscaldarsi molto. Sar per le temperature elevate di questa estate, ma effettivamente dopo gi una mezz’ora di utilizzo non puoi tenerci sopra la mano per pi di 10 secondi per quanto scottino.
In conclusione questo kit, HSV811W PRO, lavora davvero bene e pu essere una buona scelta per chi, come me, ha una tv non servita da impianto satellitare o digitale terrestre. Il prezzo lo trovo un po’ eccessivo visto che si trovano prodotti con stesse caratteristiche ad un costo leggermente inferiore.
Die zwei Boxen verbinden sich nach dem Einschalten automatisch miteinander, was aber einen Moment dauern kann, der Betrieb ist unterbrechungsfrei. Der Extender untersttzt Auflsungen bis zu 1080p bei einer maximalen Bildwiederholrate von 60 Hz.
Die bertragung selbst erfolgt kabellos ber eine 5-GHz-Verbindung. Bei der bertragung gibt es keine sichtbaren Qualittsverluste, fr die bertragung von Videoinhalten ist das Set daher gut geeignet. Prinzipiell knnen auch Spielinhalte bertragen werden, allerdings muss man dabei bedenken, dass es hier zu Latenzen kommt und dies auch wahrnehmbar ist, weswegen sich die bertragung speziell fr schnelle 3D-Spiele weniger eignet.
All good apart from it drops audio signal after every half hour or so. Just need to switch off and on the sky box.
Its a little hassle but I guess we can live with it.
Die Bildbertragung funktioniert stabil, allerdings kann nur HD bertragen werden. Das Bild ist okay, ich meine eine leichte Bildverschlechterung gegenber der Originalquelle zu erkennen, aber wirklich nur minimal. Der Ton wird auch gut bertragen, es gibt keine Tonverschiebung.
Eine ganz leichte Latenz zur Originalquelle ist da.
Alles in allem eignet sich das Set gut, um Videos kabellos zu bertragen, abgesehen von den ganz leichten Mngeln bei der Bildqualitt gibt es nichts zu meckern.
Il collegamento pu essere da 1 a 1 (point-to-point) o da 1 a molti: per questa ragione le applicazioni possono essere molteplici.
In casa l’utilizzo di questi extender mi consente di collegare il mio pc al televisore, cosa utile per lavoro o finalit ricreative. Cosa interessante che sul dispositivo ricevitore possibile collegare una tastiera ed un mouse tramite cavo usb (lo dico nel caso servisse). Potrei collegare anche il mio decoder sky nel caso fosse distante, per varie ragioni, dalla tv o il mio videoproiettore.
L’utilizzo davvero semplice, cos per come servono a me.
Esteticamente sono gradevoli a vedersi: le antenne occupano decisamente spazio ma pu non essere un problema a seconda di come li sistemati. Trasmettono su vari canali.
Tendono a riscaldare un po’ ma credo sia normale. Nella trasmissione del video la qualit rimane ottima. Ho notato un minimo di delay rispetto alla sorgente. Nessuno delay nell’audio, quindi nessun problema di sincrono.
un hdmi extender, in pratica invece di avere cavi lunghissimi da attaccare dietro ad una tv riesce a trasmettere il segnale wireless.
La portata buona anche se separati da un muro funzionavano benissimo.
possibile collegare pi cose agli extender, come un pad, davvero un bell’articolo!
+ Gut verpackt, mit guter Ausstattung, z.B. 2 Verlngerungskabeln fr die Antennen, Bedienungsanleitung aber sprlich
+ Loop-Anschlu vorhanden, d.h. ein weiterer Monitor kann am Sender angeschlossen werden
+ Leichte Installation: 4 Antennen anschrauben, Netzteile anschlieen und schon wird die Kabelstrecke per Funk berbrckt
+ Die Verarbeitungsqualitt ist gut, die Gehuse und Kontakte wirken robust, auch die Netzteile wirken nicht billig und sind CE-zertifiziert
+ im Betrieb gab es nur handwarme Erwrmung
+ Ich konnte nur 30 Meter testen – da traten keinerlei Rauschen oder Unterbrechungen auf – sehr gut!
+ Die Gerte waren – out of the box – gekoppelt – bei wem das nicht klappt, wird sich ber die vorhandenen Reset-Taster freuen
+ Infrarot-Fernbedienung ber Extender mglich und gut.
Was war nicht so gut?
Natrlich lsst sich “nur” HD bertragen – das sollte im Vorfeld beachtet werden und fhrt natrlich nicht zur Abwertung.
– Bei mir gab es Soundprobleme mit einem alten TV – urschlich ist das natrlich der alten Technik geschuldet, zeigt aber eine Schwche dieses Sets auf:
Fr Monitore ohne ARC, gibt es keine Mglichkeit, den Ton ber TosLink auszugeben – das kann dazu fhren, dass der Monitor stumm bleibt – das habe ich bei anderen Systemen schon besser gesehen.
Fazit ( bis jetzt ):
Wer jetzt z.B. zur EM die Spiele im Garten genieen mchte, erhlt hier ein gutes Set, ber weite Strecken ein HD-Signal zu erhalten, ohne Kabel zu verlegen.
Die Funktionsfhigkeit der Fernbedienung bleibt dabei erhalten und die Bildqualitt ist wirklich gut und strungsfrei.
Bei dem recht hohen Preis htte ich mir allerdings gewnscht, dass es noch eine digitale Audio-Schnittstelle fr ltere Monitore/ und / oder Soundanlagen gibt.
Vielen Dank!
questo set pu essere accoppiato insieme ad altri 3 trasmettitori per un totale di 4 set in contemporanea ma ognuno avr un ricevitore e un trasmettitore, infatti questo prodotto non un distributore, la cosa che mi piaciuta di pi di questo prodotto la prolunga dell’antenna che aiuta molto in casi estremi, lo consiglio.
Preso per poter collegare il pc gaming alla tv del salotto senza cavi.
Partendo dalla scatola e dalla dotazione sono rimasto colpito dalla completezza e ordine.
Ci sono i due box, trasmettitore e ricevitore, due trasformatori da dodici volt, quattro antenne da avvitare, due cavi prolunga per antenna, un trasmettitore infrarosso e un ricevitore infrarosso.
L’ho subito provato, collegato il trasmettitore all’uscita video del pc e alimentato.
Il ricevitore collegato all’ingresso della tv e alimentato.
I due apparati si sono visti e collegati in automatico, non ho dovuto fare nulla, come avere un cavo ma senza averlo.
Il desktop del pc era perfetto, provato un video e tutto ok.
Tutte le prove fatte a 1080p, frame variabili ovviamente col pc.
Provato cyberpunk 2077, gioco che mi gira a 1080p e 60fps fissi.
Preso la moto e son andato a farmi un lungo giro per Nightcity e le Badlands.
Non ho avuto nessun problema, stessa visione che avrei avuto sullo schermo del pc.
Unico cosa che mi spiace che l’audio non ha il passthrough, quindi solo audio della tv e non quello dell’amplificatore, ma giusto, riportano che lo standard supportato hdmi 1.3, per avere eARC serve standard hdmi 2.1.
Nelle mie prove avevo le antenne di ricevitore e trasmettitore a vista.
Non ho fatto prove con muri di mezzo, ma non credo si siano problemi, a patto che non siano muri di cemento armato di trenta centimetri.
In caso ci sono due cavetti per estendere le due antenne, una trasmittente e una ricevente, non sembra, ma possono fare un enorme differenza.
Se vedevo bene i game in 1080p a 60fps va bene anche per i film che di solito sono a 30fps, provato qualche video, nulla da dire, tutto si vedeva bene.
Da tempo non uso pi la tv satellitare, mi basta AmazonPrimeVideo, altrimenti avrei provato anche il ricevitore e trasmettitore infrarossi.
Sicuramente li user in futuro quando metto su pc un controller tipo della xbox infrarosso, giusto per avere un range maggiore rispetto i dispositivi wireless 2,4G.
Per le mie prove posso dire che un bell’apparato wireless.
La trasmissione perfetta senza ritardi, ci si pu giocare come se la tv fosse collegata con un cavo fisico.
Audio altrettanto perfetto.
Il prezzo altino ma ci che permette non cosa da poco, 1080p a 60fps con audio e controllo di dispositivi infrarossi, ovvero tutto ci che serve.
Consigliato, esteticamente anche belli da vedere, fanno bella figura in ogni postazione gaming accanto a pc performanti.
Il trasmettitore ha anche uscita loop, ovvero entri con il segnale hdmi che viene trasmesso wireless e rimane disponibile un uscita per collegare un monitor con cavo hdmi.
Molto comoda, perch si ha sempre il video sul monitor principale e il video sul ricevitore solo se si accende il monitor ad esso collegato.
So no extra socket need at end tv just cat 5e cable
I run cat 5e about 19 mtrs set all switches to zero
Plugged in all in and the picture was amazing wow so easy “” Works very well with no loss of picture very easy to install. “
beim streamen von Amazon Prime und Netflix starke Verpixelungen ansonsten supe
Il promo impatto non stato dei migliori, non si riusciva ad avere il segnale a 6/7 metri tra trasmettitore e ricevitore. Non perdendoci d’animo bastato collegare solamente il cavo di prolunga d’antenna (in dotazione) sil tx e il tutto si risolto, anche se i due apparecchi non sono a vista, tra di loro, ma separati da due muri. Lo suggerisco.