VEVOR Bookbinding Press Machine A4 Heavy Duty Bookbinder Double Balance Rod 12×8.6 Inch Paper Press Machine Manual Paper Flattening Machine
| | | |
|---|---|---|
Thickened SteelThis bookbinding press has its service life greatly extended by rugged thickened steel, making it nondeformable, thus improving the flattening effect. | 12″ x 8.7″ Working AreaThe working area of this product is highly up to 12″ x 8.7″ (305 x 220 mm), allowing your documents within the thickness of 5.9″ (150 mm) to be pressed efficiently. | 2204 LBS Heavy PressureThe intense pressure of 2204 lbs (1000 kg) is attributed to the rotary handle, elongated nut, and thickened plate, assisting you in work without any effort. |
| | | |
|---|---|---|
0.3″ Thickened BaseplateDue to the 0.3″ (8 mm) thickened baseplate and the non-slip foot pads, our product possesses extremely stability while working. | Three-Side BafflesOur paper press machine comes with three-side baffles (detachable), which are equipped to simplify your operation and make the documents tidier. | Extensive UsageAs a necessary office tool, this bookbinding press machine is widely used for pressing photos, books, stamps, banknotes, fabrics, etc. |
Specifications
- Pressure: 2204 lbs (1000 kg)
- Effective Working Area: 12″ x 8.7″ (305 x 220 mm)
- Flattening Thickness: 5.9″ (150 mm)
- Baseplate: 0.3″ (8 mm)
- Item Weight: 36 lbs (16 kg)
- Item Dimensions: 14.6″ x 8.7″ x 12.9″ (370 x 220 x 330 mm)
Package Content
- 1 x Bookbinding Press Machine
Bookbinding Press Machine
The bookbinding press machine is designed for commercial use, handling pressing water from freshly laid handmade paper. It’s made of thickened steel and a precision-machined screw mechanism. This press can also be used for handmade books to flatten and straighten pages and covers.
- Durable Material
- Effective Working Area and Pressure
- Steady Structure
- Easy Operation
- Best Office Tool
| Weight: | 16.5 kg |
| Dimensions: | 40 x 37 x 26 cm; 16.5 Kilograms |
| Brand: | VEVOR |
| Model: | VEVOR |
| Manufacture: | VEVOR |
I was really looking forward to getting the book press, but a bit disappointed when I opened the package as the bottom base plate paint was chipped along the front edge. As it didn’t affect the overall working of the press, I kept it. But I think that as this was a pricey purchase, it should have been properly vetted before sending it out.
Hugely heavy, but then that’s good. Maybe not for the delivery driver for me it’s just what I want to flatten Prince
The finish is utilitarian but it presses ok so it does its job and considering the price of forged or cast vintage presses it a good buy.
After some experimentation, I found the best way to squish down A5 stapled booklets was to rotate alternate booklets 180 degrees and then offset all the spines slightly inwards (to ensure maximum pressure is applied to the spine/staples – see the attached image). I also found that you need to leave it clamped like this for 12-24 hours for best results. Overall very pleased.
As a hobbyist book binder I had been looking for one of the fancy cast iron nipping presses but the prices are either too high, delivery exorbitant or pick up hundred of miles away. This is a neat little press and handles everything I need. Superb bit of kit.