WORX WR143E M1000 Landroid Robotic Mower 1000m²
A robot mower with power to share
Landroid is powered by the same long-lasting, high performance PowerShare battery that equips all Worx cordless tools.
Agile and efficient
Complex lawns mastered
Worx Landroid always finds its way through narrow passages without needing a guide wire. The AIA patented intelligent navigation technology makes Landroid finish the job much quicker than other robot mowers operating with random paths.
- Always finds its way through narrow passages.
- Finish the job much quicker than other robot mowers operating with random paths.
| | | | |
|---|---|---|---|
Edge cutTypical robotic lawnmowers leave an approximately 20cm wide strip of uncut grass along the perimeter of the lawn. Landroid’s cutting disk is positioned as close as possible to the edge*, so as to leave behind none or very little uncut grass. * available on select models | The intelligent robotic grass care systemWith algorithms developed by top grass scientists, Landroid adapts to the ever-changing conditions that influence grass growth, such as temperature, sun radiation, rainfall and nutrition. These factors are applied to the specificity of your grass species and soil composition. | Uneven made evenLandroid’s new self-leveling cutting deck* automatically adjusts the blade’s height to match the natural unevenness found in most lawns. Not only does this prevent the blade disc from scalping your turf, but it also prevents the blades from hitting fallen branches. * available on select models | Future-proof your investmentRobot mowers don’t come cheap. But, instead of having to fork out on a new model every few years, we’ve got a smarter solution. Just like your smartphone, new software is seamlessly delivered to your Landroid via automatic over-the-air updates. So it’s bye-bye to spending, and hello to sustainable living. |
Make Landroid your Landroid
The only modular robot grass cutter system
Customisation makes Landroid truly unique. All Landroid robot grass cutters are designed to be adapted to your individual needs through the use of four modular options.
| | | | |
|---|---|---|---|
The gift of sightGone are the days when robotic lawn mowers would rebound off trees and onto other obstacles. Landroid’s Anti Collision System (ACS) module option features ultrasonic obstacle recognition to dodge tree trunks, furniture and objects left on the lawn with ease. | Simplify installation and reworksNew trampoline? Freshly planted flower bed? This would require you to surround the new features with wire connected to the powered perimeter cable. With the Off-Limits module option on board, just drop the invisible fence around your lawn’s existing and future features. | Boundless connectivityLandroid relies on cloud computing to get weather information and software updates, but home Wi-Fi networks normally only cover a fraction of the garden area. The RadioLink module option establishes a peer-to-peer dedicated radio connection between your Wi-Fi router and the robot, and stretches as far as 500m metres. | Protect your investment from theftPut any security concerns to rest with the Find My Landroid module option. It allows you stop the Landroid from operating, and even track it down if someone decides to nab it from your garden. An additional perk, the module connects Landroid to the internet even if you lack Wi-Fi. |
| Weight: | 9.4 kg |
| Size: | WR143E 1000m2 |
| Dimensions: | 52.8 x 66.5 x 28.4 cm; 9.4 Kilograms |
| Model: | WR143E |
| Part: | WR143E |
| Colour: | Orange |
| Pack Quantity: | 1 |
| Batteries Required: | Yes |
| Batteries Included: | Lithium Ion |
| Manufacture: | WORX |
| Colour: | Orange |
| Quantity: | 1 |
| Size: | WR143E 1000m2 |
But once i set the perimeter wire the correct way
Wow hey presto it works awsome
No way this baby is going anywhere now
Must say its a joy to watch this mower do one chore i hated most
Now its time to sit back a pint of beer in one hand and enjoy life
This beast does a great job which a lot of people hate
In mycase the serial number (SN) and MAC address didn’t match between the sticker on the landroid and the log. You will not be able to connect to the landroid with wrong serial number (no matter what you do with your router/firewall). In order to obtain the !real! SN and MAC address:
Please always make sure you use an empty, FAT32 formatted, 2/4/8GB USB pen drive and follow the steps below:
1. Turn ON the mower and insert your PIN
2. Plug the USB drive into the USB port on the back of the mower – you will hear a beep
3. When you read USB on your Landroid’s display, remove the USB drive
4. Unplug the USB drive from the mower
5. In the USB drive you’ll find the LOG_xxxx.htm file
Hopefully that helps
Its good honestly just get it.. not pixky with stuff the wifi connection can be a bit tricky at first and getting everything set up but once you adjust a few times and get the droid to connect to the 2.4 wifi connection you are all sorted!
My little Ro-Mow is amazing. Had him a couple months with very few issues. The biggest was him saying he had been lifted which made me think someone was trying to steel him. In actual face, he got stuck on a large wind fall apple. Easy to install and program from the app.
I’ve literally never written a review for anything but this is superb, it’s wasn’t arduous to setup, tech support was useless when I called if I’m honest, but I didn’t find it hard to setup and it’s taken very little tweaking to it now being I’ve almost forgotten I’ve got it, the lawn is mint permanently I will never go back, this is robust silent and genuinely excellent.
We loved using this mower this summer and it was great that it was one less thing to upkeep in our large garden. I know you can buy attachment for it to avoid obstacles but noticed newer robot mowers are coming with this feature. So not great if you have kids toys or outdoor furniture. We had to buy a shelter for it too. We will buy another robot mower for our back garden but will be looking for one that detects objects and possibly one without the wired edging. But overall it worked great for our first summer using it.
This is an initial review. I have installed it, let it run, adjusted the wiring and run it again several times including the perimeter cut and ‘back to home’. It is cutting well and is very quiet. It does get stuck easily so ensure there are no dips and bumps that can trap it. Charge time is quicker than I anticipated. Wifi connection was straightforward but I do have strong coverage outdoors. I don’t think the app is particularly intuitive but it’s ok. I’ll update this review as I get a better impression of its effectiveness. Overall, I am pleased with the mower; if it continues as it’s started, it’ll be a very good acquisition.
Works extremely well, it is a shame that they do not supply the ACS with it, as it’s essential for most gardens, but at an extra 200 it’s hard to swallow. I am not all that impressed by the app though. It seems very limited, but at least we have him on timer for 1.5 hours a day, which is sufficient for our paddock.
It does work extremely well, and has been a welcome addition to the family. Such a joy to sit back & watch it, instead of grappling with the tractor mower & never decreasing grass heaps. If you find this a chore, you will be delighted with this mower. It rarely gets stuck, & our paddock isn’t perfect by any means. I cannot comment on reliability yet or customer service etc, but will be sure to add comments in the future, if we have any problems. We deliberated for a year over this mower & gave in on Prime day with saving.
Would highly recommend 🙂
Living up to expectation. Not enough pegs supplied. placing them 80cm apart is not close enough. Generally I found 40 cm or closer was needed otherwise wire can be chopped by lawnmower. In sufficient waterproof connectors supplied
I am so pleased I decided to get this Robot mower. It was a bit hit and miss with setting out the boundary wire, mainly because my lawn is so uneven. Eventually opted to Bury the wire in the grass. I now have much more manageable grass with only the edges to cut. Best money spent on any previous mower as the lawn is now starting to even out. Advice, read the instructions and if your lawn is not good to start with, Bury the boundary wire. I will be adding extras such as anti theft device once I have mastered all the programmes etc.
First worry was that my garden isn’t perfect, full of bumps, dips, complex ins and out, trampoline, swings, bench, washing lines, trees that the machine would have to traverse, also I have a raised bed for my septic tank as you can see in pics, I was unsure if it would be able for them.
Answer is, YES it is more than able, it has no problem with any of it. Any upright things like the swings, washing line poles and trampoline it just bumps into them, turns in a different direction and gets on with things.
The legs for the trampoline I buried so that it could continue on its path instead of getting stuck on them or instead of bumping into what ever you wish to stop it from doing that(blocks or wood)
Going up and down hills it can do no problem aswell, as it climbs my raise septic tank no problem, pic attached to show.
Had to fill one or 2 deep dips in garden as it would get stuck, but not surprised as I always got stuck in them with my push mower.
All in all it took me about 2 hours work to prep the yard, which is half an acre to get this going with out it needing to call for help.
Second worry was, bringing grass clippings into the house on your shoes.
Answer is a little bit if the grass is wet, but my grass hadn’t been cut in a week before setting this up so that probably didn’t help, now that its all cut to length and the robot is only maintaining the length, I havnt noticed any grass clippings in the house, yet.
Third worry was my toddler and dogs safety. My wee boy isn’t terrified of it but is very wary of it, the dogs the same, they keep there distance when its out. But I do set the schedule so that my boy isn’t around when the robot is at work, so it works away during his nap time and then again when he goes down to bed in the evening, best to play it safe I think, I think it would be fine if they were all out in the garden together but just not chancing it.
After just 1 week, my lawn looks fantastic, alot shorter than I would normally cut because now I don’t have to collect the clippings, so can afford to go shorter and the grass looks great, a bit yellow in place because of it being shorter but withing 2 weeks the whole lawn should be a beautiful even carpet of green and best off all stay that way.
I’ve probably left 2 or 3 things out but hope this helps you make a decision on your purchase.
Best of luck,
Stuart.
I’d been researching robot mowers for a while, my dad has an Ambrogio Twenty and it’s great quality so I was going to get one, problem is the back order and the price as I have a small lawn I wasn’t sure it’s worth it, plus the Landroid app is better.
I then had to decide on the s300 vs m500, I’m glad I went with the S300 it cute close enough to the edge for our garden which was a concern, after some initial tweaks to the boundary it’s perfect and has done a great job. Well worth the money and I’m glad I didn’t fork out double the cost for the bigger models.
Review below still stands but I’m knocking one star off because there is a problem I don’t like. I have had to cordon off a small are of my garden but I tell you this robot mower doesn’t accept no for an answer. When it comes up against an obstacle from an angle (not head on as that seems ok) it repeatedly tries to edge its way into the obstacle, not once, not twice, but 5 times but 7 or more times it repeatedly turns towards the obstacle trying to get past, churning up the ground as the wheel spins and damaging the paintwork of the robot and scratching along the obstacle as it doesn’t give up. This is a really annoying flaw in the software and needs to be fixed. Maybe try once or twice but at that point, TURN AWAY from the obstacle and get on with mowing please. When Worx fix this I’ll reinstate the 5 stars but for now I need to reseed the area of the grass that it’s messed up.
Just a short review to say that this robot mower is fantastic. Main points: Setting up is easy although laying the boundary wire takes time if you have lots of corners and obstacles etc. It took me quite a few hours to get it inch perfect. Bear in mind that there will be a couple of inches at the edge of a wall or obstacle that the mower won’t reach but a little manual trimming each week is a price worth paying for the convenience of not having to mow the main lawn. You’ll want to be sending the mower out pretty much every day so as to keep the lawn neat. Yes the mower mows randomly but honestly this isn’t a problem. The only thing is that occasionally it misses a clump of grass but tends to pick this up the next time it moves. The mower can definitely mow longer grass but you won’t want it to because the blades left behind sit on top of the grass. Instead, you’ll want the mower to be mowing once a day or every other day so that it cuts off tiny pieces which fall to the roots and mulch quickly. These little grass cuttings are not sticking to shoes or ending up in the house. Having no grass clippings to get rid of is brilliant! The best part about this mower is that you end up just sitting there watching it go about its routine, very therapeutic. Also the grass has never looked better, the weeds don’t appear to get a chance to pop up as they get hacked back every day. I did lay a new lawn with good quality seed so that probably helped but I’m convinced that this mower will keep it looking good. You do tend to get a wheel track line around the edge after it’s done its edge routine and you do get vague cross cross patterns in the grass where the wheels have been but actually it looks quite a nice effect. The app is really simple to use although if you pick the mower up and put it back on the station manually (happened a lot at the beginning when I was testing the wire placement) you get an annoying ‘wire missing’ error, and I recall it being a bit of a random fix to get rid of that message. The mower deals with slopes well and easily gets itself out of a sticky situation. Sometimes the wheels spin a little while turning on a slope but again it tends to sort itself out. After having the mower for a few weeks I would highly recommend getting one. Not sure what went wrong in my life to new get so excited about watching grass grow and then being cut by a plastic machine but there you go. 5 stars from me.
It took a while to set up as we had an issue with error messages, but customer support was surprisingly helpful. It covers over 1200m2 and if you don’t mind some strange patterns to start with, it’s a great workhorse.
Absolutely fantastic piece of kit! After having this for 2 weeks, I haven’t manually mowed the lawn once!
There’s a bit of work initially to set up the boundary wire, which may take an hour or two depending on the size of your lawn and how fast you work! After that, you set up the app and away you go. The lawnmower will do its own thing at the times you set and when it’s done, or if it runs out of charge, it just finds its way home and charges itself on the dock, ready for the next session! Best thing I’ve bought in 2022!
Next purchase will be a robot vacuum cleaner.
Amazing product, cut the grass effortlessly, ease to install and manage. I have around 350sqm of grass which is tackles fine, I have another 350sqm of lawn to add. I have had it almost a year now, changed the blades every 3 months, App is great can monitor, when it cuts the grass, how much area its cut. if it gets stuck sends an message to my mobile. You can change the depth on how much you want it to cut. few times have left the hole pipe on the lawn went over it without cutting it. I had the setting on high luckily. Cuts grass randomly yet manages the whole lawn.
It appears to be good value and competitive with rivals. I have had very good service from Worx equipment dating back over 10 years without problem. I was drawn especially to the long warranty on the motor and the ability to update the software. The installation, Bluetooth set-up and manual operation all went as per the instructions. A trial run drew attention to some minor adjustments needed to the boundary wire to ensure the drive wheels kept out of the borders.
Unfortunately it will not see serious use until the grass starts to grow again, but I’m looking forward with confidence to it being a good buy!
Excellent grass cutting robot – replaced my ride-on. Much, much easier than I thought – it does everything automatically. Highly recommended!
It just works. But you wont realise how much it is doing unless you have something to gauge it by. I wanted the ‘edge’ feature so although I have a small garden (74m sq) I went for the 500 model. Unless you have a bowling green of a lawn, I would get extra pegs for the cable. You will find that the cable will sometimes lift in places and it will need pegging down, although this is a now and again not every day.
The lawn always looks good, I will still have to walk around the very edge with a strimmer, but this is a 5 min job every couple of months not me having to mow the lawn every week. Also, I now longer have to deal with clippings, so no trips to the tip or paying for the garden waste bin.
The connection to the WIFI is a pain in the butt. Once you have it working, it just works, but expect to mess around with router and settings a bit unless you have a dedicate 2.4ghz band. (I have new bt fibre hub and I had to turn of 5ghz and do some port forwarding until it connected).
The wife is very happy with the grass, I have more spare time and I would buy again if needed. brilliant piece of kit, wish I had bought long ago.
Initially there is some setting up to do but after a week or two and some YouTube videos it can basically be left alone to cut the grass. Very pleased with i
Awesome little product and worth every penny! It’s does take a little time to set up but once that is complete all you do is sit back and relax. I haven’t cut my lawn since purchasing and the grass looks amazing, well maintained, luscious and green. Would highly recommend!
I love it. However, it does get stuck from time to time at certain points on the boundary wire so some adjusting is necessary. My only criticism is the fact you are provided with a measure from the boundary wire to the edge of the grass and it will indeed cut right up to the edge. I don’t understand then why the robot needs extra width to follow the wire back to the base to charge. This means the right rear wheel runs on your flower border and can get stuck. Result, I had to move the wire in a bit meaning it now doesn’t cut right up to the edge. Perhaps the software gurus at Worx can look into this?
I’d packed this up once to return to amazon but relented and tried one more time to see if it would work. I did speak to customer services, technical but found them to be pretty clueless. The guy was going to speak with his supervisor about my issues and call me back, but he never did.
I eventually got it to recognise the two distinct areas of lawn, i.e. front garden and rear garden. It doesn’t, as they claim, appear to learn the area. Instead I just set it off and hope it eventually covers all the area, which it sort of does, leaving just the odd patch, uncut.
It’s very quiet in operation and, when it does cover the whole area, does a nice job. Although you do need to trim around the edges where it can’t reach.
So far, I’m glad I persevered and kept the thing especially when I see my neighbours with their conventional lawnmowers. I can cut the grass while I put my feet up 🙂
However, problems with the ride on mower and health problems with a gardening contractor meant that the grass was getting too long and the field unusable. As we have a robot mower on a small lawn near the house, we looked at getting one for the field.
With rough measurements we worked out the lawn size so had to go for one that cut 2,000 square metres.
After a week, the results were fantastic.
So now the maintenance of the paddock is greener. No fossil fuels, just plugged in to the green electricity supply.
Warning:
The transformer for this mower is not waterproof (unlike other robot mowers). Due to the distance from our house to the Landroid station we had to purchase a waterproof box to house the transformer.
Setting Up:
Someone suggested connecting a small wire on the charging base to complete a circuit whilst you charge. That is not necessary.
We placed the charging station on a patio table as close to the Wi-Fi router as we could. Put the Landroid on the charging station and it charged OK.
Make sure that the Landroid is near to the Wi-Fi so that you can connect and download the Firmware update.
Wifi:
The Landroid uses Wi-Fi and the internet. This is used to allow you to monitor the Landroid. It will also report back to the App if there are problems. Unfortunately, our Wi-Fi does not cover the area to be cut. To get around this we also purchased the add on Find My Landroid. This uses mobile phone access to report back status and receive commands. It also acts as a burglar alarm.
Insurance:
It is difficult to get insurance on Robot Mowers. To be covered by insurance they must be kept in a locked shed. Hhhhhhmmmmmm. Find my Landroid is a sort of insurance policy. You can always trace it and set up a geo-fence. If it goes outside the area then it raises the alarm.
Steep slope slopes:
We did have one problem with a step slope that the Landroid has to navigate to get home. In damp conditions the Landroid got itself stuck. The work around was to be a special artificial grass for robot mowers (which did not seem to be available on Amazon). Search “hybrid grass square”.
We also set up a track by spacing U shaped pegs (example Landscape Staples, U Shaped Nail Pins | Galvanised Steel | Ideal for Weed Control Membrane, Netting ) . This creates something that the wheels can latch on to. Actually a lot cheaper than the grass.
Good bit of kit, the manual could be better and more information in it would be helpful.
I was skeptical whether it would work or not. But it does and the grass looks pretty good so far.
I laid the boundary cable just under the grass with a lawn edger. Took half a day but was easier in the rain.
Had to make one small adjustment where it fell into the bedding as the cable was too close but otherwise it works well.
The Wi-Fi does not work and I’ve followed all the online guidance I.e. direct to router (adjusting all the settings possible), USB key direct to lawnmower, mobile hotspot – and it still doesn’t work. That means the App has no value either. To add to frustration the supplemental Radiolink is out of stock across the whole country. Hence 1 star off.
It’s been a while since I did it, but I think you need to download the app 1 st before you get started on WI-FI linking.
Perimeter setting is very easy, just time consuming. Make sure you leave extra loops of wire at various intervals in case you expand your lawn.
My lawn is only 70m, it’s divided by a continuous concrete path, so I cut a groove with angle grinder for the perimeter wire at either end so mower will cross it. This is something I’d not even thought about and it’s lucky I have one, otherwise I don’t know what I’d have done.
Also make sure that all your lawn obstacles that will be permanent are where you want them to be. I was planning on moving the washing line pole, but I’ve not left enough slack in perimeter to do so. The quickest thing to do is cut the wire, move pole, and re join it with spare wire once the object is moved.
I’m not going to bother, to much effort!
Also you may need more pegs I ran out and I only have a small lawn. This was because its uneven and I was paranoid that the mower would cut the perimeter wire, It did!!! So make sure the wire is well laid close to ground.
Also I made a cover for it by bending some of cut of re-bar, works a treat, best of all its free.
The initial boundary wire setup took days, and the adjustments have since taken weeks and are still ongoing. If you have a complex garden like mine, you will need plenty of extra boundary wires to mark the long perimeter plus the perimeters of each garden feature. First thing to know is that the boundary wire works just as a long antenna, so you don’t need to buy them from Worx — any cheap unshielded wire from the local hardware store would work. In the manual it says that the length limit of the boundary wire is only 450m, but you can go theoretically go higher if you use wires with larger diameters and therefore lower resistance. In my case I used 1.5mm wires and easily went above 600m without issues.
Now, the mower would struggle with tall grass and uneven grounds. A small rabbit hole would often be enough to get the mower stuck, so expect to spend time keeping the ground even for the mower to function properly. On balance, however, the mower does save one time and keep the lawn in a better shape.
Now onto the modules — while I liked the idea of a modular design, and that the module hardware seems to be well-built, the software works so poorly that I would not recommend getting either the ACS or the Off-Limit module.
The ACS has two major problems:
1. it assumes every obstacle is a pole, so it could avoid a tree but would drive straight into a wall.
2. it avoids tall grass! This second problem means that during the period of rapid growth, sometimes the grass would grow enough between mowing sessions (remember that the mower doesn’t cover the whole lawn every time, and also cannot mow in the rain, so sometimes the same patch would not be mowed for days) such that the mower would start avoiding it.
Overall the mower works better without ACS.
If the ACS is less than helpful, the Off-Limit module is positively damaging:
1. The top problem is that it doesn’t always work. Sometimes the mower wouldn’t recognise the module and would behave as if the module isn’t installed, and other times the mower would recognise the module and still mow through the magnetic strips, destroying whatever the Off-Limit strips are meant to protect.
2. The other major problem is that even when the Off-Limit module functions, it always turns 180 degrees around when it hits a magnetic strip, instead of applying the randomised turn algorithm. That effectively leaves the area around any Off-Limit strip less mowed statistically, a problem that is further exacerbated if the strip is used near a hard-to-reach area.
So as some other reviews have pointed out, it is better to either rely on the boundary antenna wires or simple wooden planks, as they are both more reliable and do not screw up the mow algorithm. Another point I want to mention is that the manual says that the magnetic strips must form a loop, but that is just nonsense for anyone who understands physics (the weaker magnetic fields at the ends don’t justify the instruction either, especially when it is possible to cut a longer strip to farther remove the ends or just double up the strip). I cannot help but feel that the modules are developed to a far lower quality than the core unit.
There is, however, one useful undocumented function for the Off-Limit module — if you have an island larger than 6m x 6m, it is possible to add a short magnetic strip across the island boundary wire to break the loop, allowing the mower to not get stuck in the loop while trying to follow the boundary wire back home. It’s ironic that the only valuable use of the Off-Limit model is expressly forbidden by the manual instructions.
I hope that Worx would provide a firmware update that makes the modules more useful. A simple change to reuse the good random turn algorithm for both when the ACS detects an obstacle and when running into a Off-Limit magnetic strip would be enough to make the modules more useful than they are today. Until then, I would recommend the core unit but not the additional modules.
I like this product. It’s even cheaper than a dog in lock-down and almost as much fun. It mows nicely effectively and on-time. It operates well from my phone as well. Sometimes I just make it mow for the hell of it (lock-down madness I suppose). Why 4 stars rather than 5? It does dig up areas where the ground is uneven and so leaves some ruts on some of my trickier corners. Of course, I wish it didn’t do that. Actually, it’s super. I’ll give it 5 stars.
1, What’s the difference between the models when they all look like the same size unit cutting anything between 300 and 1500m2?
2, Can you increase the cutting area of the cheapest model by upgrading the battery?
And the answers are:
1, Not much it seems, the bigger models have a 4ah vs 2ah battery and come with more wire and pegs but that seems to be it in terms of capacity although a couple have extra features such as edge cutting and floating cutting decks
2, Yes. The eagle eyed amongst you might spot that the spec for the charger on the smaller model is 500ma va 1500ma on the bigger ones which suggests its going to take longer to charge a bigger battery. In fact, they all come with the 1500ma charger which charges the 4ah battery in under 3 hours and the additional weight over the main wheels probably improves traction a bit.
So, I bought a 4ah battery for 35 and 200m of wire for 62 (from this very boutique) and I’m now using the Landroid S 300 to cut 505m2.
Overall I found the installation much more straightforward than some of the reviews suggest, and was gearing up for a week or troubleshooting but in fact was up and running the next day. My tips are:
1, Use the Landroid app to calculate your area and lawn perimeter- not essential as the 200m roll of wire is best value but useful to confirm that you’re beating the system by far exceeding the stated capability of the S300.
2, Mow your lawn- sounds a bit odd but the Landroid is designed to continually maintain grass at a set length not do a weekly cut so will struggle taking off anything more than a couple of mm. Also, cutting it enables you to get the wire closer to the ground as well as clearing twigs and other debris if you have trees.
3, After choosing your base location, peg out your wire allowing a bit of slack and pegging every 1.5-2m not the 80cm recommended.
4, Take the blades off the mower, set it at the maximum height and let it follow the wire. I wanted to ensure it was as close to the edge as possible and was able to adjust the path where necessary without risking damage to the blades or wire.
5, Perimeter set, I then let Ted do his thing for a couple of hours and was expecting to have to fill and level the many ruts and undulations in my lawn as he struggled and got stuck but no, like small child taking unexpectedly quickly to riding a bike Ted was off and motored up and over them with no problems while I stood at a distance like the parent of said child, watching and feeling both happy and unneeded.
6, Don’t worry about trees or other fixed obstructions, I’ve got 4 trees and a wooden combined swing and slide frame with 6 legs, Ted bumps into them gently, has a re-think then heads off in another direction. That said, if you prefer just use your extra wire to extend the perimeter to get your Landroid to avoid them.
7, While Ted was exploring the garden I pulled in the slack wire and I buried (I used a flat bladed spade but a lawn edger will do) in the areas where people walk or where its visible, at the back and far sides I fixed it on the ground with the supplied pegs, make sure you keep the wire tight. I used a big square woodworking mallet and where there were small lumps and bumps I gave the path of the wire a hammering just to make it flatten primarily to save on the pegs because they’re plastic , the wire has tough insulation so can’t be damaged by this but you might need to re-tension it. Where there were big dips I added extra pegs where needed.
And that was about it, its early days but Ted is set to auto schedule and just does his thing following about 4 hours effort by me over a couple of days. I plan to add my 200m2 front lawn and can see no reason why Ted won’t be able to cope with it. All I need to do now is get him to sort out the drainage in the lower field.
After comparing reviews on several models and brands, selected this worx model. I have a good size garden that takes on average 2 hours per week to keep well maintained. From the simple set of about an hour the mower got to work. It took about 4 days before the grass height was even and the results just got better. I used to get strips on the lawn with my conventional mower but I dont miss this as the lawn is now always looking good and I dont have to spend hours cutting and even more time taking clipping gas to the recycle centre. I would describe the grass cut a looking like a rug but in a good way. You still have to strim the edges by the fences and the inside corners as the cut to edge doesn’t reach but this takes literally minutes, I’ve bought a very light battery strimmer for this so it’s just a slow walk around with no effort. I am delighted with the Worx and could not recommend it more highly, why did it take me so long to get one.
I love it!
Easy to set up and after a few tweaks with the boundary wire you have nothing more to do other to watch your little robot cut your lawn.
If you like a perfectly cut lawn look (without lines) then this is the machine for you. All you have to do is strim a few hard to get to areas, the rest of the time you just sit back…. nice
This is an excellent robotic lawn mower and we have not been disappointed. The physical set up is straight forward and just takes some time and care. What is then a bit puzzling is getting the thing to do it’s stuff via the app. Set to auto it languished in the garden not moving for days on end. I can easily tell it to mow but it is supposed to think for itself and do it. It does occasionally tootle out and mow for about an hour. The. It parks its self for a few days. Clearly a setting not right. And this is the only issue I have with Worx not the mower. Do some descent instructions and a cheats guid to setting up on auto please!I have emailed them. They emailed back saying wrong department (instead of just forwarding it to the right one!). So when told it is a joy to watch the lawn being mowed whilst I am doing something else. I just wish the how to use instructions had have been better. I would still but it again though as the mower copes really well with our slopes and undulations cutting right up to the edge. So good mower not so good instructions but you can figure most of it out yourself – apart from auto!
Reading all the reviews on this has helped me take the plunge. What a great addition to the garden yes the boundary wire takes a while to do but once this is done leave your landroid to it.
Easy to set up just gets on with the job. Mowing by hand is now a thing of the past.
After some rain one of the wire pegs must have risen slightly as the cable was cut by the mower. I had enough wire to replay the entire boundary so I did it all again from scratch following the previous wire but burying it. I used an edge cutter but a spade would suffice. This solution is better but the mower got stuck on an uneven bit of lawn, so I have levelled this to avoid the mower getting stuck and generating lifting errors.
Since then it has worked perfectly and I no longer have to mow the lawn other than strim the edges every so often.
Great purchase. Thoroughly recommend.
**** UPDATE 12 NOV 2020 ****
Winter has arrived so I have turned off the Charging Station (why waste power) and put my mower into my heated workshop to hibernate. I am still pleased I made this purchase. I will probably place my mower on the charging station every month just to top up the battery until Spring arrives. Not having to mow the garden or empty the grass clippings has made a huge difference from a time perspective.
Easy to setup and operate. My first one died after 5 days when trying to update the firmware to the latest version. Worx helpline just repeat what was in the manual, which was impossible because the machine was completely dead. I rang amazon and right away they told me to return it. Which I did, and was refunded immediately. I then purchase a second one which is now working well with the latest firmware.
After much consideration, I finally decided to purchase the Worx WR 130 E S, which ideally suited my needs for my small, odd shaped, fairly bumpy lawn area. I did consider the edge trimming model but that was 250 more so decided that for just a bit of strimming at the edges, the smaller model would be fine.
Installation, following the Worx instructions, was quite straightforward, although I was a little concerned that you just laid the wire into the grass, but carried out the procedure as described in the instructions. I decided that it would be ideal to dig in, in places where footfall over to the grass may cause problems of tripping on the wire. I am retired and getting on in years so installation was a slower process than would normally be, but I completed the complete installation in an afternoon.
Running the mower for the first time was straightforward, although linking up to the Wi-Fi was a little problematic, even though I had a very strong signal at the charging point. The message came up on the mower readout that the connection was successful but the phone would not link up. So I consequently started the mower manually and away it went.
Later that day I tried connecting with the phone and, this time, connection was successful.
As instructions said it would be best not to dig initially on see that the mower was going exactly where you want it proved to be good. I found that their distance of 26 cm was a little bit wide and after fine-tuning found that 18 to 19 cm from the Borders was just right.
We do have problems with foxes in our area and they had tended to dig up and chew the wire in places which had to be repaired, but after fine-tuning I decided I would dig the wiring a centimetre or two into the soil, just pressing the spade blade in to the soil a fraction, wagging it side to side, then pushing the wire in and closing the gap.
I did have a problem when I was notified that firmware update was needed. I downloaded the update onto USB stick and followed the instructions, only to find that the mower went completely dead and would not restart. I tried reinstalling again and again, but still to no avail. I contacted Worx via email to which they responded very quickly (within an hour or so), explaining that they had come across this problem a few times before and attached the software required to reset the mower and install an updated firmware. Installing the new firmware went reasonably well although it didn’t follow exactly the procedure the instructions said, starting the mower manually and away it went. Since then I’ve had no problems whatsoever.
I must say that my lawn has never looked so good. I’ve now had the mower for a couple of months and I can, at will, change the settings, times, mowing, etc any time I want from my phone.
And a great bonus is, that if foxes decide to transcend the lawn, I just call Robert up and tell him to get mowing – they soon clear off! So mower that acts as a Fox deterrent. FANTASTIC!
To say that I’m pleased with this fantastic little machine is just an understatement. I encourage anyone thinking of buying one that this is the make to get.
Compared to my previous robot (a Flymo) it gets stuck more often (mostly around the dry dusty edges or if it runs over a pine cone) but at least it tells you when it’s stuck. Or it’s supposed to… And that is the biggest problem I’ve come across so far. The internet connection software and App are unreliable and badly written. It loses connection with the cloud for long periods of time and doesn’t remember anything that happens to it while it’s disconnected. So you get some alerts & not others and the activity log is incomplete. Oh and ignore the marketing hype about cloud-controlled amount of cutting – it only works properly if you set it up & optimise it manually. Which works well from the app as long as the machine is actually connected at the time!
Excellent product – real time saver and does a superb job
Great little robot to have in the garden
Once setup it works a dream doing the grass although I have only had in use a few times
As described box a bit tatty ,the goods inside appeared never have been out,not had chance too test it yet.however good value for the money.
Two things – first attempt just peg the wire out above the grass and set the mower to the highest cut (50mm) then place the mower near the base station but pointing away from it to the left, send it home and it will follow the wire the long way back so you can test your pegging distance is ok. You’ll probably need to make some adjustments for ditches, obstacles etc but once it can go back and dock you’re probably about halfway there. The other is the placement of the base station – it was important for us that it was tucked away and couldn’t be seen easily – we had one place where we could put it which was on the paving slabs but there wasn’t enough room to put a metre straight either side of the base (as is recommended). Fortunately the wire going in is fine, the one coming out comes out about 40/50cm before it immediately comes back on itself and into the garden. This works ok – the mower spends a minute realising there’s nowhere for it to go before it eventually turns the right way and off it goes.
I’ll be honest, i nearly sent this back as my first attempt (4 hours) wasn’t great. I gave it another go and it took me another 4/5 hours and got it all working. Just be prepared for it to take a day or two depending on how complicated your lawn is. The app is excellent, we get decent wifi coverage in the garden so it’s easy to keep an eye on it, it hasn’t had a problem yet (about 4/5 hours mowing so far). The app will give you an estimated mowing time (eg: start at 9am and mow for 40 mins) based on the value you put in as lawn size (or you can walk around it with the app and it’ll try and work it out). Personally i thought that was a bit low so for now i’ve set it to 2 hours each day, which i’ll reduce until i can see the difference.
In short, a great product but you need to be patient – whether you need one is another matter. Personally i don’t like seeing the grass grow longer and knowing i have to waste time cutting it at the weekend etc. We don’t have it cutting the front but if that’s something you need i think you need a 1 metre wide passage but check out some of the other reviews from people who have done that.
I’m so glad I did!
It works perfectly. It’s really, really good. Smart as well, rain sensors, upgradable extra modules, intuitive smartphone app, pin code and anti-theft lock options to mention but a few. It’s also whisper quiet. My lawn’s less than ten feet from my bedroom and I can barely hear it with the windows wide open.
The only significant downside is that it does take a lot of work to install correctly – and if you want to take full advantage of this machine, at the serious geek level, then wi-fi coverage of your lawn will be required, well. at least to the charging station anyway.
But, before you go out and grab one for yourself right now, there are a few considerations to mull over first. Namely choosing which model will best suit your requirements/meet your expectations, and also a clear understanding of exactly what’s involved in setting up these Worx Landroids correctly – as cutting corners on the latter, no pun intended, will surely end in disappointment. So if the extent of works described in the procedure below seem a little too onerous for your tastes, then I’d suggest not buying one of these machines.
Before going into further detail regarding the setup side of things, it’s worth mentioning that whilst the WR130 s300 model will cut the lawn perimeter, being guided by the supplied guide wire (more on this later). The WR130 doesn’t have the ‘cut to edge’ function of the WR142e model. So if your garden is bordered by flagstones, bricks or any surface at the same height of your lawn, and is under 300 sq/m, then don’t bother with the much more expensive WR142e model and save yourself 300 as this far cheaper model will straddle the lawn and any adjacent same-height surface thus cutting the entire lawn border just fine.
If, however, your garden has walled perimeters, raised beds, or sunken beds of a dissimilar height to the lawn (i.e. more than 15mm), then the offset mowing deck of the WR142e, and its cut to edge function, is something you may want to consider opting for as the WR130e won’t cut closer than circa 50mm to any vertical or sunken lawn border.
Trying to get around this by setting the WR130’s guide wires closer to the edge than is recommended simply won’t work. If a close cut to the edge is of paramount importance, then you’ll have to shell out the extra cash for the WR142e
Now to the setup; it’s really important to take the time to do this bit properly as anything short of a precise installation will end in a repeatedly stuck mower, cut wires, or a very expensive orange football and lots of expletives.
First step, select suitable charging base location:
Install the charging station on flat and level ground, ideally in a place where you can easily supply power to the station (the lead’s quite long so you’ll have some flexibility in this), using the coarse lawn screw supplied to pin it down. It may seem ungainly at first, but bear in mind that the grass will grow through the grid of the charging base and eventually completely hide it from view.
Second step: marking out the perimeter.
This is important, if the distances set at this stage are incorrect, then things go wrong. I used a line marker spray to set out where I intended to lay the wires, but you could also temporarily and loosely peg out the wire on the lawn’s surface before to ensure you’re happy with this configuration before committing to a permanent installation as described in the next step. As a basic rule of thumb, you need to set the wire 260mm away from a raised or sunken border, and 100mm away from any border/edge level with your lawn.
For internal ninety degree angles, either make the wire follow a gentle curve with a minimum radius of 300mm, or turn it into two forty-five degree angles with a minimum length between each other of 300mm. External ninety degree angles are clearly illustrated in the book, but only necessary for a perimeter cut. In my case, I opted for a 300mm curve instead.
It’s worth pointing out that on the internal ninety degree corners, there’s always going to be a little tuft of grass at the apex which won’t be cut, no matter how diligently you set the wires.
Third step, securing the perimeter wires:
the instructions suggest clipping it on the lawn surface every 800mm with the pins provided – save yourself the heartache at this point and take the more difficult but ultimately worthwhile option of burying them – as well as pinning them. It doesn’t need to be much, just use a spade to open a slit in the lawn, push the wire down by 10mm or so, pin it every 800mm, and at the start, apex and end of any curve.
Fourth step; connection of perimeter wires, operatio,n and a well-earned gin & tonic:
I won’t go into too much detail here as the app is pretty much self-explanatory and related instructions unambiguous.
One final word of warning: when selecting the mowing height on the rotary dial, it’s the number that’s nearest to the ground which indicates the setting selected. I made the mistake of accidentally lowering the mower deck to 20mm instead of 50mm – and came back a few moments later to find some very interesting patterns in the lawn. Fortunately any evidence of my stupidity has long since grown out.
In conclusion, if you’re prepared to work hard in the short term, then these machines are a great way to be lazy in the long term.
Quite brilliant! Does what is says on the tin. Buy with confidence. Well engineered, capable software and logic. You may need to help with the edges from time to time depending on your layout.
(1) It has fairly good reviews, although they are all from people who have been given free machines to review.
(2) It claims to be able to handle 1,500 square meters of grass.
(3) The battery is easy to replace and is said to be readily available.
(4) It wasn’t cheap and you (often) get what you pay for.
(5) It can be programmed and controlled from an app on your ‘phone. (More on this later).
The thing arrived quickly from Amazon Prime, as stuff always does, and in the box I found: the mower, the psu, battery, charging station, 200 meters of wire, plastic pegs and various bits of hardware.
The documentation ran to:
(1) A pictorial Get Started guide
(2) Safety Rules / CE declaration / Warranty declaration / Helpline
(3) Safety instruction / Charging Procedure / CE declaration
As others have indicated, the documentation is woefully inadequate, you really do need to get the installation and user manuals from the internet and print them out (skipping the colourful outer pages).
Here was the first glitch. Every machine has two names. Mine is the L1500 but there is no manual for the L1500, I needed the manuals for the WR153E. Come on chaps, make your minds up, give the thing one name and stick to it.
Setting up the base is fairly simple: put the PSU in an outhouse or shed, it has to be within about 5 feet of a power socket, and the low-voltage cable then runs outside to the base: it’s about 30 feet long. If you are drilling a hole for the wire, it needs to be about one inch in diameter to accept the low-voltage connector.
The wire is a pain to install. I think this is common to all of these units. Being 200 lb of muscle and testosterone, I decided to push the pegs in by hand (I live in Lancashire, the ground is nearly always soft). Halfway round my garden, on my hands and knees, I wondered why my thumb was so sore. Learn from my mistake and use a mallet.
It is surprising how undulant apparently flat ground can be. It is important to make sure that the wire is closely pressed to ground everywhere, because when the robot trundles around the perimeter, it seems to want to have the guide wire at its centre. There is a real risk of the mower cutting the wire and grinding to a halt. The different manuals give mildly conflicting advice on the spacing of the pegs 700 to 800 mm seems about right.
Now, a circle with a circumference of 200 m will encapsulate an area of over 3,000 square meters. A square 50 x 50 m would have an area of 2,500 sq. meters. I thought that my 200 meter roll of wire would be plenty – but it isn’t. My garden is a very odd shape and the loops that one invaginates from the main circuit to isolate flower beds, ponds and the like use up a fair length of wire. I’ve managed to get about half of the back lawn wired up and have ordered another 150 m of wire and some waterproof connectors: I’ll have all the joy of “extending your system” to contend with later in the week. Can I extend the perimeter to 350m or 400m ? Again, there is conflicting advice.
The app was a sad disappointment. I downloaded it from Google Play (I’m on Android) and took the mower to the end of the lawn with good WiFi coverage. Eventually, it managed to take a picture of the QR code on the mower and then talked me through setting the mower’s WiFi up. The mower said that it had all been hunky dory. The app disagreed and said that the mower couldn’t connect. After a couple of tries, the app started telling me that my “SIM number” was invalid – even when I typed it in manually (And, is that leading 2019 part of the serial number? Are the spaces supposed to put in or left out? Who knows).
The app suggested that I could find the serial number on the “Quick Start Guide”. There is no such document. There is a “Get started” leaflet – but my serial number was on the back of the Safety instruction / Charging Procedure / CE declaration. Anyway, the app shows no indication of having registered my mower; it refuses to connect to it, and so far, I do not have a way of programming the device from my telephone. Not at all impressive.
The machine seems to be made in China for a German company. One should not indulge in cheap stereotypes, but I can quite imagine one group saying: “Put the optimistic numbers in – they sound better, we’ll sell more” and the other group saying: “We shall quote the proven specifications”. It would account for just about every technical detail having two different answers.
My advice to the distributors would be to unify the documentation, include it in the box, eliminate the contradictions, get the app working properly.
The machine itself seems to be doing well enough: my lawn is not a bowling green and the mower does seem to able to go round it without (so far) getting stuck. I’m expecting to have to buy quite a lot of sand when it starts to explore the more irregular terrain that I have.
The charging base makes me a little uneasy. Two spring-loaded metal plates stick out and the mower simply bumps in to them when it wants a charge. The instructions say it’s not to be used or charged in the wet… but there is no cover over the base and this is Lancashire. I shouldn’t be surprised if corrosion sets in to the charging connexions and smearing them with petroleum gel is going to stop them from working entirely. I think an induction system would have been better, but no-one asked me at the design stage.
Overall:
Good in parts.
The app doesn’t work.
The documentation needs to be fixed.
I’ll need to make a roof for the charging base.
I’ll edit this review at a later date with long-term results .
First Update: While I was typing this, the little orange robot has been trundling about, mowing grass. I went out to follow it around and see what it was up to. It’s quite an endearing thing, but incredibly stupid. It got to the point of having a low battery and said that it was going home. It got home, but only one of its connectors connected (I think that the base has to be very flat and very level with an easy approach: I have some levelling to do) – did the robot go back and try again? No. It decided to look for the base station by going the long way round, and of course it didn’t have enough energy left to travel 200 yards so it stopped and had to be carried back. I hope that the AI behind driverless cars is more sophisticated than this!
Second up-date 02/07/2019
The thing remains endearing and I’ve finally ironed out some of the glitches: I’ve increased my rating to four stars.
The manufacturer did respond quickly when I asked them about the WiFi issues. The advice that they offered was already in the manual and didn’t address the problem, but they do seem to be communicative and appear to want to be helpful, that has to be a Good Thing. Eventually I carried the mower and my Android tablet to another wireless access point. After half a dozen tries the app connected to the mower and I could programme its schedule. That’s a lot better than trying to use the little LCD screen and push buttons on the robot.
Curiously, I couldn’t get notifications or otherwise connect to the machine through the access point that covers (most of) the lawn at first. Then it started working for no obvious reason and I got a message to say that it was stuck. It was a good 20 yards from the house, so it must have been communicating through the access point that didn’t work for it originally. I don’t understand, but it is working and it seems to be in range over about half of the lawn. Good enough.
The mower does not like long grass or old grass clippings at all so I gave the lawn another “final” cut with the lawn tractor, rather shorter than I’d normally cut it, and went over it with a sweeper attachment. That has helped. There’s still a lot of trial-and-error: the mower gets stuck several times a day and when it does I have to work out why and then try to make that particular spot of ground Landroid-friendly. Fortunately I have some time off at the moment so it isn’t a huge problem. I only hope that I can get it running reliably by the time that I go back to work.
My extra wire, to extend its range over the rest of the grass, hasn’t arrived yet but I think that I’d better get the system running as it is and then extend it. There are enough glitches to contend with already. I have levelled the ground where the base sits and now the Landroid can (sometimes) find its base and recharge. It remains, however, unalterably stupid. Today it said that it was “going home”, it found the base, came to rest with its connectors touching the terminals of the recharging point, sat there for five seconds and then set off again “going home” with only 8% battery charge. Perhaps Worx will address this with a firmware update at some point?
So far, I’m pleased with it. If you have a large area of not-well manicured grass, as is my case, then I think that you find it is a a lot of effort to set up. I also hope that once the system is working properly it really will be reliable enough to run completely autonomously. I have some doubts. Still, it is undeniably more fun than running mindlessly up and down on a lawn tractor all day.
06/07/2019 – One Week In.
It is growing on me. I think my liking has risen to 4.5 stars out of 5. Now that I’ve ironed out some of the wrinkles it can go for a whole day without problems, dock at night and set off again in the morning without human intervention.
I’ve extended my wire and now it encompasses an area of about 1,500 square meters. Perhaps I should have bought the 2000 model, anyway: I now need to save up for (or try to build) another robot for the rest of the grass. I wish I could work out exactly how the RF guidance system works.
Here are a couple of problems that I’ve had and how I fixed them:
Firstly, an error that will not clear with “Reset – OK” probably means that the mower has detected a sequence that could mean it is being stolen and has gone into locked mode. To clear the error, take the machine to a spot which is (1) in WiFi range and (2) within the wire perimeter. Use the app to switch off lock mode, then the errors will clear as normal. When all is running smoothly, re-enable lock mode (again, using the app) as an anti-theft deterrent. The mower seems to be highly suspicious about being turned upside-down, especially if it detects that it’s outside of its RF loop.
Secondly: the manuals warn about earth-leak of the RF signal through faulty insulation. The system seems to be incredibly susceptible to moisture in its connectors. The solution is to dry the connexion, make sure that it is secure, then pot it up in a little plastic box packed with general purpose silicone goo. It’s an annoying fault because the wire still has continuity and so the base-station shows green on its LED, suggesting that all is well. If you have a “no wire” fault and yet the green light is lit, moisture in a connexion is probably to blame. Conversely, “no wire” and a red light suggests a break in the loop.
Thirdly: being somewhat impetuous, I didn’t pay close attention to the direction of the wire around excluded areas. This can give rise to an intermittent fault where the robot seems to run well but then stalls next to the excluded area, indicating that it is outside its mowing area. I think it means that it’s detected the perimeter wire, turned, and then met the inner loop with the RF signal travelling in the wrong direction. It thinks that something impossible has happened and stops. This is easily corrected by reversing the connexions to the aberrant loop. It also gave me a chance to research the susceptibility of wire joints to moisture (see above).
My advice to anyone thinking of getting one of these machines would be to do it but plan to set it up when you have at least a week off to find all of the problems in your set-up and correct them. It is not a one-day project. Be prepared, too, to have to buy extra things like sand, more wire, suitable connectors, more pegs, silicone and little plastic boxes. Sitting outside with a good book and a cold beer, while the little mower trundles up and down your lawn, I think you’ll agree that is worth all of the grief. Good luck.
06/08/2019
Another month on and no major problems. The mower gets stuck once a week: I’m still ironing out difficult-to-navigate areas, otherwise it simply gets on with the job. I have to say that in the twenty-odd years that I’ve lived here, the back lawn has never looked so good. As the memory of all the set-up difficulties fades, I’m tempted to uprate it to 5 stars. Certainly one of my better purchases.
24/06/2020 It’s been running for nearly a year now.
The app gives one the opportunity of naming the mower. “Hector” seemed appropriate (although he cannot quite manage an hectare) and now that I’ve named the thing, of course, I’ve grown even more fond of it and very forgiving.
I was wrong about the stainless steel charging connectors. They do work pretty well and show only minimal corrosion. I am building myself another robot to mow the dark side of the garden and I’m *not* going for induction charging, despite what I said last year.
The firmware has been updated. Hector is now more intelligent (well, less stupid) about getting himself unstuck and he cuts closer to the edge than he did before. This is good, in that the lawn edges are now more neat; bad because he now slides down steep banks that previously he avoided. More spade work and wire-moving is needed.
I’m still very pleased with Hector. I repeat that my lawn has never looked so well. But do, for heaven’s sake, go into this with your eyes open. You are buying into a project, not a one-off solution.
Good luck
– and thank you, to the kind people who left comments.