DIWANGUS Joystick Desk Mount 2 Set, Desk Mount for Flight Sim Game Joystick Compatible with Thrustmaster T16000M FCS / TCA / T.Flight HOTAS One / 4 / X, Logitech G X52 / X52 Pro/ X56
DIWANGUS Joystick Desk Mount
Key Product Features
- Quick Assembly
- Foldable Quickly
- High Compatibility
- Outstanding Stability
- Height Adjustability
Package List
- 2 x Joystick Mount
- 2 x Mounting Screws Parts
- 2 x Installation Manual
| Dimensions: | 36.6 x 25.2 x 13.6 cm; 4.01 Kilograms |
| Origin: | China |
The clamps are strong, I left my Thrustmaster Warthog hotas mounted to my desk for over 24 hours and they worked perfectly.
For the thrustmaster warthog stick – you’ve to unmount the base plate, leaving exposed wires – and it doesn’t fit perfectly center, but it does the job.
I removed one star, because the bolts are really awkward to setup and level properly.
Has been used with a thrust master t16000 kit, and now with a winwing orion2 hotas setup. Fits well to the hotas, and connects to my office-type desk. Good purchase, only (slight) issue is it needs a tight connection, but with a desktop cover (think big mouse mat) it is good
Been looking for clamps like this but other brands were too expensive and then I came across these.
No brainer purchase for me, build quality is very good, very adjustable and connected my Thrustmaster T16000 joystick and throttle to each clamp.
Clamped to my desk and after a little bit of position and height adjustment I was ready to get stuck in with flying the H145 Hype Performance Group helicopter.
Feet on the rudder pedals, hands on controls, feels right and instantly my control of the 145 improved 90%+.
Using the joystick and throttle control on the desk was just so much harder and the position of my arms didn’t feel natural.
I’ve knocked off a star as I feel although these are very good they’re a bit overpriced.
Highly recommended though for much better control of msfs 2020.
It’s worth taking the time to get them dialed in when you first get them. Once done, a single clamp with lots of pressure will secure them in place. I’ve got mine setup with the minimum drop from the desk possible and they’re really comfortable. I drop the arms of my chair and they’ll glide under the HOTAS and everything is at just the right level. When it comes to work time, Undo the clamp and drop the HOTAS out of the way. I’m using the Logitech X56 on these, and couldn’t be happier. I’m still able to use the mouse and keyboard. Whilst playing Elite Dangerous in VR these brackets put the HOTAS in roughly the same position as I see virtually. I’d highly recommend getting these help with emersion.
They take a bit of adjustment and time to set up but these are exactly what I was looking for. For anyone wondering they fit a multitude of flight sticks/throttles. I use the Thrustmaster Airbus stick and quadrant. Both fit perfectly.
Bought these thinking they may be a bit flimsy but to my delight, once all the screws are all tightened they are rock solid.
Lots of adjustment means I can tweak the layout lots. Also really pleased to find it came with the X56 kit so all bolts and fittings included for the X56 and other joysticks.
Really pleased with the set so highly recommended.
Some of the reviews mention not being provided with any of the necessary bolts to connect flight stick to the mount. I Had no such issues with 3 different lengths of bolt to attach from.
The VPC WarBrd from virpil was not mentioned in the list of compatible bases. As you can see from the included picture It fits snuggly into the mount with a little bit of room to adjust postion ( but not by much). It also supports my T16000.
Quick release clamps make for easy removal, however it is not possible to fold away without first removing your flightstick base (A fairly quick job providing you have the tools with you)
Very Strong – I now need a more secure desk to mount them to.
I wad a bit weary about these but the realy well designed. And very good quality.
Just received this kit and was very pleasantly surprised that they have reworked the plates to be symmetrical. So now you have access to four mounting points for the x56 throttle and stick. Very secure and rigid when mounted. Well done!
Does the job, and for half the price of other typical options like Monstertech and Foxx Mount.
Works perfectly with TM TWCS module but there is some movement with my VKB gunfighter MKIII MCG with #30 springs and anything higher would be unusable.
Its not foldable really as you have to bolt everything together. In order to pack it away you would need to unbolt the HOTAS then loosen the brackets, losing the perfect position you spent way too long getting it into when you initially set it up. It could do with some additional cushioning where it attaches to your desk on both sides in order to prevent damage.
These are perfect for thrustmaster t. 16000. About to upgrade to winwing orion 2 so will update review next week
Just upgraded to Winwing Orion 2
Edit: upgraded to Winwing Orion 2 Hotas and its a perfect fit!
Using screw nuts from hotas suction pads and supplied screws from hotas to attach to mount.
Just a real solid set of mounts. Lots of adjustments you can make for height depth etc. The base for joystick attach is solid and pretty sure you can “make” them work with all sticks with a little easy modding.
Came with everything required. Much cheaper than some of the alternatives. I’m using them with x56 Rhino and find them more than stable enough and not having some of the wobble issues others have reported, however I do agree with other reviews that the cross bars securing the stick to the base could be better.
T ook some time to set up, hat to keep my temper few times, nice and firm when set up. The screws do not have bolts so . X56 won’t fit out of box , was lucky had 4 of the right size at home , over all very happy . They have gone above and beyond to sort out the nut problem grate customer service
I purchased these to mount a Logitech X56 control stick and throttle. The desk mount is adjustable and solid, my only gripe is that the supplied stick and throttle mounts only allow two screws per device. I created a couple of mounts from metal strip or you could 3d print some.
Overall really good for the price
Was a bit doubtful as cheaper than others – very solid once setup well worth the money
Great bit of kit however make sure you have some M4/M5 bolts for the screws that mount the joystick as they are not included in the package.