AirTag Bike Mount Holder Protective Case with Safety Anti-theft Screws, AirTag Bicycle Mount To Be Hidden Under Bottle Cages, Water Resistant, perfect camouflage,With complete disassembly tools(1Pcs)
Fully modeled according to the size of the airtag, perfectly embedded, leaving no extra space.
Fits On Standard 64mm Bottle Cage Holes
Made of high quality ABS instead of metal, it does not affect all the functions of the airtag. You don’t have to worry about signal interference.
Includes 2x 20mm M5 Bolts, 2x 30mm M5 Bolts
| Weight: | 50 g |
| Dimensions: | 12.2 x 7.5 x 1.3 cm; 50 Grams |
| Brand: | WALLFID |
| Manufacture: | WALLFID |
| Reference: | aita01 |
I bought 2, liked them so much I bought one for a third bike.
The AirTag fits in well, and no rattles.
The install was not easy since the wrench is too small to turn by hand. I had to get a socket on Amazon.
The AirTags are working flawlessly when inside.
The replacement bolts worked great
They are hard to notice on the bikes.
I highly recommend the case and bolts, but you will most likely need a better tool to screw them in.
This is a good option to attach an air tag to a bike. It’s plastic construction doesn’t interfere with the signal from the air tag like some other options and it utilises an unusual bolt fitting to make removal for a thief a little more difficult.
I would highly recommend that you remove the speaker from the air tag (lots of videos online) to again make it a little more difficult to locate for a thief.
I’ve had these fitted to my bikes for a few months now and wanted to give some honest feedback.
The construction at first seems a little flimsy and the screws don’t look great, but they work just fine, they do lift your bottle cages up by 5mm or so, this might cause issues if you’ve got a lack of frame clearance, e.g., a 2XS frame etc.
They work as intended though, pop your airtag in and off you go, I’ve had these work through Hardshell bike boxes in an airport etc, so they don’t seem to massively impede the ability to track the airtag, though this does also mean they don’t stop them from making that bloody anti-stalker racket if your phone is away from your bike for long enough.
Installato in una MTB sotto il porta borraccia, per contenere l’air tag. Di facile montaggio, un paio di minuti massimo, fornito di viti e chiave a brugola speciale. Fa perfettamente il suo lavoro, materiale plastico ma resistente. Consigliato
Didn’t fit the hole on the bracket was off alittle making it difficult to screw in it works but not easy
Update cust service was the best sent me another set at n/c now to see if this sets fits fingers crossed will update after I try
Its a very simple hard plastic cover in two pieces. The Airtag is a VERY snug fit and getting it out again to change the battery will be tricky. There is no inner rubber washer or seal so I am not confident it will keep out rain water. For this reason I applied a strip of waterproof Gorilla tape around the edge over the join to try and make it waterproof – I don’t know if this will work, only time will tell.
These AirTag holders work exactly as described. I was initially worried that after adding these holders, there wouldn’t be room for the air pump holders and water bottle holders, but they provide two different sets of screws to make sure you can still accommodate your accessories.
Es ist nicht unsichtbar und jeder kann erahnen was da drin ist. Was da wohl passiert wenn der Dieb mit dem Bolzenschneider ran geht. Aber als zustzliche Abschreckung sicher zu gebrauchen.
I ordered this to fit a apple tag to Mountain bike and its been perfect for that hides well under a bottle cage and will be my life line if the worst happens.
Prodotto perfetto e completamente invisibile ci si deve mettere impegnino a notarlo facile e veloce da installare ottima la qualit sia del contenitore sia delle viti e ho apprezzato molto le chiavi di diverso tipo in dotazione
Easy to fit & well hidden from view a few different sized bolts supplied to fit most water bottle cages
This item is robust and not to be confused with the many cheaply produced 3D printed versions available for half the price. The item is well made and includes the security screws and tool for installation. The case is showerproof but a piece of tightly stretched cling film will protect it against heavy rain.
Depending on the bike that it is being installed on, the cover can be fitted on the top rail screws under the bike pump which is how I’ve installed it.
It holds the AirTag tightly, there is no rattle (a complaint of some similar products). There is no rubber seal so I cannot vouch for its waterproof capabilities but it fits together very tightly so I am confident that water ingress is unlikely with rain, splashes etc.
It come with 2 lengths of security screw (20mm & 30mm) so attaching it to your bike under the bottle holder is not a problem. (Again reviews for other similar products complained that screws were not long enough). The holes in the casing also mean you could attach it to other parts of your bike (eg under the saddle) with cable ties should you wish to hide it but the design is discrete and the security screws I feel this is not an issue.
The casing does not appear to affect the range for locating the tag on my phone.
Overall a great product.
I docked one star because the bolts are too short. They should have provided two sets of bolts, one long and one short. Long for people who would like to install a bottle holder over the airtag mount. Since the bolts are short, one cannot install the bottle holder and AirTag mount together.