Hikig 2 Set The Desk Mount for The Flight Sim Game Joystick, Throttle and Hotas Systems. Fully Support Almost All of Flight Sim Game Hand-Control Devices Compatible with Thrustmaster HOTAS Warthog
| Weight: | 3.69 kg |
| Dimensions: | 37 x 14 x 8 cm; 3.69 Kilograms |
| Brand: | Hikig |
| Model: | 2PC-DSK-MNT-FLT-BLA |
| Colour: | 2 Pack |
| Batteries Included: | No |
| Manufacture: | Hikig |
| Colour: | 2 Pack |
| Dimensions: | 37 x 14 x 8 cm; 3.69 Kilograms |
I use them for Dual Trustmasters and this are gold, gold I say!
Well built product with the capability to be used in multiple configurations. The t slotted aluminum beams are absolutely rock solid. Really appreciate the fact that there are extra screws and anchors in the package as well.
These where a bit tedious to get together, though once they were I found them very sturdy. I use the x56 with these and I feel it let’s me put the controls exactly where they need to be. Would recommend.
It takes a few minutes to set up, but you can then customize your controllers to be the height you want the width you want and they are sturdy. When you’re done they can unlock from your desk and you’re good to go.
Follow the instructions and it goes together nicely. Very sturdy.. Love it.
Very good engineering and very strong and sturdy. I got this when it was at a cheap price and I am very happy with the product, makes my flight sim a lot better and more enjoyable.
Effectivement, ce n’est pas donn mais la qualit gnrale du produit est bonne.
L’assemblage prend un peu de temps (~45 minutes) et il faut parfois prendre son mal en patience, mais la petite vido explicative que l’on peu trouver sur la page du produit facilite grandement le processus.
Globalement satisfait.
It does what it is supposed to very well and less expensive than the other ones. It comes with like 2000 nuts, bolts, screws, and washers, but you only need a few of them, the rest are for other applications that are not shown in the manual. I did nearly bleed out after bumping my knee on the sharp edges, a little bit of black duct tape took care of that issue but it would be nice if they included 4 plastic or rubber pieces to put on the ends. The brackets where the clamp is appear to have bent slightly after installing, will have to keep an eye on that in case they need to be reinforced or replaced with some angle iron. The vertical pieces are very long to accomondate taller desks, I ended up cutting off a few inches with a chop saw to keep them out of the way.
I had shoulder pain from having my stick high up on my desk; these mounts sorted it. They’re also compatible with both my current HOTAS (X56) and the HOTAS I’m upgrading too, VKB Omni throttle and gladiator NXT. Two mounts for 130 is a bargain, definitely pick up these for a better flight/space sim experience!
The instructions are just okay. Learning how to properly assemble it will take some trial and error. They could have given some suggestions along the way, like mounting your controllers first, or which bolts to tighten first and which to leave for last. Assembling the first one took about 45 minutes. The second took about 25 because I learned from the mistakes I made on the first. Once done, this is a very solid product. Great stability. Puts my Thrustmaster T-Flight HOTAS right where it needs to be.
The mountain recommendation for the Thrustmaster T-Flight HOTAS is incorrect if you’re going to mount them separately as I have. Use the cross bars and there are two threaded receptors on the bottom of each controller. It is enough to solidly mount them.
BEWARE: There are SHARP metal edges on these parts. I sliced my knee open pretty good to the point of bleeding profusely for about 5 minutes. No excuse for not rounding these off a little at the factory. Taking off one point of material quality because of this.
I’m taking one point off the overall rating because of the lacking instructions and the overall fussiness of assembly, but this is otherwise a pretty solid product. There is abundant mounting hardware included to mount different brands and types of hardware. Solid addition to my gaming rig.
I really like it my arms don’t hurt now after a long time playing like before.. the first one was a little awkward to put together but the second one was alot easier…
Fast delivery within 48 hours. Setup easy to follow instructions. Material looks very good quality, fixed it to small side table with monitor arm also to play console flight sim with thrustmaster t flight controllers and could not have come out better. Love it when a product and vendor is and does exactly as advertised. Would order again or as a gift for flight sim gamer!
I bought 2. When I opened the first one I thought, “great, lots of parts to assemble”. The first one took me about 25 minutes to assemble. The second one took 10 minutes. It is relatively easy to assemble for a novice. One thing I recommend is that you purchase blue lock tite. That will prevent any nuts and bolts from getting loose.
This is well machined. If you have even the slightest mechanical aptitude, this is easy.
There are two solid methods for assembly depending on your set up. Very well machined.
I am loving my set up.
These are the best mounting kits I’ve ever had hands down. Some assembly required but that’s what makes it so good. Literally works with any setup!
If you don’t mind that you have to build the mounts yourself this is a nice design. Very easy to adjust for different setups and controllers. This will likely last longer than the HOTAS you buy it for.
The clamps make it easy to add and remove the controllers from my desk for when I need the space to work on other projects.
Montaje muy sencillo siguiendo las instrucciones pero adems parecen indicar un vdeo en Youtube para ir siguiendo los pasos, aunque si sois de los que os habis montado algn asiento de simracing este anclaje no tiene prdida y en unos 10 minutos lo tendris montado y anclado. Dispone de distintos modelos de bases y tornillos para joysticks de diferentes marcas. Todo queda muy bien sujeto y apretado (eso s, tal como indica las instrucciones no terminis de apretar todo hasta el final, cuando tengis ya decididas las alturas y tal). Todo de aluminio/metlico nada de plstico salvo unas pequeas tapas para la terminacin de las barras anchas de anclaje y que quedan muy bien. En mi caso no ha faltado ni una pieza como indican en otros comentarios, al igual que todo queda muy apretado y sujeto, tal a un sargento a la mesa. Vamos, que se queda bien fijo y que no se mueve nada.
Use this for the HOTAS X56. Works extremely well and fits any desk. Only negative is sharp corners underneath.
From the top . . . the product comes in a purpose-designed, foam filled box that has the various parts held in individual compartments. A set of instructions is printed on the bottom of the box … in case you lose the pamphlet that’s in the box … in case you can’t find the assembly video on Youtube. The box includes attachments to support either a joystick or a throttle and these parts are sturdy and well-machined. The nuts and bolts are high-quality with spares and extra sizes included to accommodate a variety of situations.
I recommend using the installation video (“Juyeer desk mount for HOTAS sytem”) because it makes crystal clear the orientation of each part and the direction of each nut-and-bolt.
My desk mounts are attached to a keyboard platform that pulls out from just under my desktop. The mounts attach firmly enough and have a foam pad that protects the “desk top”. There was plenty of adjustability to bring the controllers properly into my hands while my forearms are on or just over my chair armrests.
(As at 3/21/22) If any problems pop up during use I’ll report them here.
Used to mount two Thrustmaster sticks (16000 series). Built my own mount for a Amazon 10hd game glass and attached it to the mount.
I was very happy with the stability after assembly. Comes with basic build instructions. Which I appreciate because many of the other items I purchased with this, do not. I put the Thustmaster Warthog with dual throttles on two of these. And if you don’t know, the throttles are HEAVY. Probably over 10 lbs. But these held them steady. Very happy with the purchase.
These are good quality mounts. Came very well packed and included plenty of hardware and a quality ball-end hex wrench for assembly. Assembly is simple (took around 30 minutes for both mounts) and they have a ton of adjustment to suit your needs. Everything is high quality and there are no burrs on the extrusions.
A couple of caveats:
I would have liked there to be some plastic end caps for the rails, I could see possibly tearing pants on the extrusion if running the stick between your legs.
It would simplify assembly if they shipped with nuts welded to a brackets for the rails rather than individual t-slot nuts.
There was one of the short 6mm screws that had a nasty burr on it, but it was the only one and I didn’t need it for my application.
I could for see flex becoming an issue with extended sticks, or high tension settings on a heavier throttle quadrant like a TM Warthog, but it works fine for my X52 Pro. I’m currently waiting the arrival of a WinWing Orion which has a heavier throttle than the warthog and will update once it is mounted.
I bought this for my X56 Hotas joystick and throttle and they work great. They very securely attach to my desk and I’m able to far more easily play Flight Simulator now!
Building them is fairly simple just go slowly and don’t tighten everything down until you’ve attached your controllers, that way you don’t have to loosen everything again.
Works very well. DCS/MSFS2020 is so much nicer to play now. Has plenty of hardware for setup and then to mount your controllers. I have a Thrustmaster TCA Airbus throttle and stick set. And even though the TCA wasnt listed as a supported flight stick and throttle to mount,, it was easy to mount both, and they feel so much better than keeping the controls on a desktop. I imagine that there are others that will work that aren’t listed,, given the mounting plate and all the options for mounting with these.
These are great with so much versatility with the different adjustments in each unit. Unfortunately both units had the adjustment bolts that clamp under the desk left out. Was able to use some ingenuity to rig up a workable solution but obviously should not have needed to. I would still recommend them for a HOTAS setup, as they aren’t bad to assemble and are pretty sturdy, assuming they include all parts.
Great quality very well packaged very easy to assemble my 18yr old daughter put one together while I did the other one solid mout very easy to adjust to your liking