Table cloth clips 24 Pcs Tablecloth Clips – Heavy Duty Picnic Table Clips, Stainless Steel Table Cloth Cover Clamps, Table Cloth Holders Ideal for Restaurant Picnics Marquees Weddings Graduation Party
| Dimensions: | 18 x 5.5 x 5 cm; 250 Grams |
| Manufacture: | LAOLINGSY |
Used for holding paper table cloths onto Gopak fold up tables. They were big enough for the thickness of the tables and strong enough to be used many more times.
These are fairly heavy duty and nice and sturdy and work fine.
24 is quite a lot so it would maybe have been nicer to have a few different sizes in the set to accommodate different table thicknesses.
Perfect for using in the garden to keep a tablecloth secure on a garden table.
These are great value and work perfectly well!
We have used 6 on an outdoor table (which we keep covered) as on windy days we always find we’re putting whatever we can down to stop it flying about whilst trying to enjoy dinner!
Since putting these on we have a peaceful dinner. We have a rectangular table so they are the perfect shape. I’m unsure of how they’d work on anything round, or anything super thick. Our table is rattan rather than wood, so certainly not as thick as some picnic tables.
From my experience I can recommend these
These are just a bargain.
This set of 24 tablecloth clips comes on a price of 7.49,which is about 31p each.
There are many packs of 8 on higher price and the quality of these 24 clips is great.
The clips are made from stainless steel and look pretty sturdy.
They are easy to use and hold the tablecloth very well.
I personally use them for my table in the garden.
They are keeping the tablecloth in place and there is no need to worry about the wind.
Hopefully my review was Helpful for you.
We’ve never invested in a large outdoor dining table, so have instead accumulated a number of smaller ones which we put together on the deck/patio when we have visitors.
Having seen these types of clips on tables in restaurants over the years, we’ve previously purchased similar clips. However, they don’t last forever and some have broken, so we were looking for a ‘job lot’ to last us a few years. These certainly will as there are 24 of them!
They fit snuggly on all of our various thickness tables. In the past the thinner tables have needed us to try to make the clips tighter or on the thicker ones to pull the clips wider apart, which is what usually breaks them! These seem to be tight enough to hold our table cloths (wipe clean & rain proof) on thinner and thicker tables without us pulling them about and ending up breaking them.
I’d say unless you really need/want 24, that these might only appeal to a cafe/pub/restaurant owner with several tables who finds that customers often steal them and need to keep replacing them.
I have to say that I didn’t pay for these, but if I had, for the advertised price these represent good value for money. I’ll update this review if any do end up breaking or losing their grip.
7.98 at TOR for 24 clips. These are well made, no sharp edges and everything is square and aligned as it should be. The spring force can be opened easily to 1.7 inches and is enough to hold the cloth in place.
Easy to use, perfect for windy weather. Just what I was looking for. Holds well the tablecloth, without damaging it. Recommended product.
The clips are quick and easy to use. They can be fitted or removed in a matter of seconds. There are 24 clips in the pack altogether, and the pack is further divided down in to four sets of 6 clips.
All 24 clips are identical and are made from stainless steel. The metal is strong and springy. Despite the metal being only around 1mm thick it’s very resilient. The clips have a smooth and slightly matte brushed metal finish to them. Both ends of the clip are rounded to help prevent tears to the table cloth and scratches to the table. I have had them attached our dinning table without them causing any damage. The clips will only fit on our table in certain places due to the frame work underneath the table.
I used 4 clips, one on each corner of the table and they have held the table cloth securely since I fitted them and not moved or slipped off. The clips have all kept their shape and springiness, even after being continually open and attached to our table for several days. Because they are made of stainless steel they shouldn’t tarnish or rust if they get wet. I think they are great value for money at 7.98 for 24 as of July 2022.
Outdoor Table Cloth Clips – 24 Pcs.
These table cloth clips probably won’t be an item you’ll use very often. Having said that when you do need them you’ll be glad you purchase them. You are getting 24 clips, that are well manufactured. There’s nothing more annoying than a blowing table cloth. These clips hold the table cloth firmly in place. The price at time of writing is 6.99, which is brilliant value in my opinion.
This set of table cloth clips are great. I do craft fairs and need something to keep my table cover down and these work perfectly. They are slim and discrete too so it’s not immediately obvious your using them. I also use them to hold down my signage. I have documented size in my photographs if that helps anyone.
I also like to go camping so will use them when we go away too, they’re only small so easy to drop into a picnic bag etc.
At 8.99 (June ’22) for the pack of 24 they are great value for money. Definitely recommended.
This is a good value set of table clips which will enable several tables tablecloths to be kept in place.
Highly recommended as metal not plastic.
We have quite a lot of dos in our garden over the summer and with British weather you never quite know what you’re going to get. These are especially useful for when the weather is a little windy as it will keep the tablecloths on the table. I also find them handy so that it is not easy to sit on the cloth and pull it etc. They come as a pack of 24 and they are made from metal. They are big enough to fit round most tables and they are easy to apply.
This is a really good value pack. So many included means replacement of any that wear out is immediate. With the kids table antics our cloth shifts and hangs unevenly all the time. Six of these clips sorted it out. They just slide over even quite think cloths and takes firmly holding them in place. Very pleased.
This is a good solution for me. I use a highly polished table for meals and the table cloth can slip off, especially when small children are involved. So for a formal meal they keep the cloth in place nicely and got well
These table cloth grips work well on the right table. The table I was going to use them for was too thick but the garden table was perfect. Once fitted round they stop the table cloth flapping around, which is perfect when you are eating outside.
Recommended
This is briliant product to hold the table cloths in the garden.
Always had this issues that table cloths are flying all over the place. These hucks hold it properly, protects from the wind. Made of strong, but flexible metal. Should last a lifetime.
Highly recommend it.
Clips for fixing tablecloths. They are all elastic and secure the tablecloth on the table. If you’re having a picnic in the garden, use these clips on a tablecloth without worrying about a sudden gust of wind.
But their elasticity is limited, and if a child grabs the tablecloth from an angle, they still slide off.
Table cloth clips 24 Pcs Tablecloth Clips – Heavy Duty Picnic Table Clips, Stainless Steel Table Cloth Cover Clamps, Table Cloth Holders Ideal for Restaurant Picnics Marquees Weddings Graduation Party
The product I received was a pack of 24x tablecloth clips.
These tablecloth clips are in stainless steel and can be used on tables up to around 4.5cm deep. I found the clips were easy to put on the table. The clips were easy to fit onto the tablecloth and kept the tablecloth secure and in place.
As to longevity I am unable to comment as I have only recently received the product, however from first impressions they appear good quality, they fit well onto the cloth/table and for a pack of 24 clips at the price being asked makes them good value for money.
Unobtrusive tablecloth clips that are sprung well and should keep most tablecloths in place. Using four clips per table this set would be enough for six tables. The clips are made of stainless steel and have rounded edges. Would be ideal for a party or large barbecue. Sturdy clips.