ELEGOO Saturn 3D Printer, UV MSLA Resin 3D Printer with 8.9 inch 4K Monochrome LCD Speedy Printing and High Precision, Off-Line and WLAN Print, 192 x 120 x 200mm Large Printing Size


elegoo saturn4K mono LCD, longger lifespan and faster printing speedExclusive Screen Protector, protect LCD screen from damage of resin spill and scratchELEGOO Saturn comes with all the necessaries you need to start your 3d printing journeybuy all you need to start 3d printing from elegoo
5 pcs fep filmELEGOO Neptune 2SELEGOO Mars 2 Proelegoo standard 3d printer resinelegoo abs-like resinelegoo water washable resin
Feature 5 pcs fep film, 0.15mm thickness, 95% light transmittance Advanced version with metal extruder and PEI surface build plate 6″ mono LCD, 129x80x160mm printing size, great for beginners Equilibrium in all aspects, great for beginners Balance of tenacity and strength Water washable, no need IPA


Dimensions: 62.9 x 40.2 x 33.79 cm; 9.98 Kilograms
Manufacture: ELEGOO
Dimensions: 62.9 x 40.2 x 33.79 cm; 9.98 Kilograms
Origin: China
Reference: UK-YC-3D-MST

40 Responses

  1. JoniMcNeill says:

     United Kingdom

    This is turning out to be an excellent machine. I started using the Rapid resin to go with it and I am getting prints in a third of the time.

  2. Anonymous says:

     United Kingdom

    I’ll keep it short, vest 3D printer I’ve had. You absolutely need to make an adjustment in any software you use to increase the bottom layer exposure time to avoid failed prints. Since changing the settings I’ve not had one failed print in over 100 mini prints

  3. Anonymous says:

     United Kingdom 🇬🇧

    I am very pleased with this machine, I ordered this after ordering 2 different anycubic machines that needed returning after 3 prints each due to screen failures. I wish I had gone with this machine first. I cant give full stars on tech support as I haven’t had to use it. as for adhesion, I have had a couple of failed prints. mainly at the start, the level card that comes with machine is too thick, after a little research online I used a single A4 piece of paper and that worked perfectly. need to level frequently to avoid failed prints as can become unleveled while removing prints, overall I am pleased with this machine, I’ve only used factory settings so far and haven’t explored at full speed so prints are taking a little longer than I’d like.
    print quality is great, even at 0.050 layer height, layer lines are hard to see. looking forward to printing something of HD to get the most out of the 8k screen. I’m very new to resin printing so still got a lot to learn, however I would definitely recommend this machine for a novice like me. I have so much I want to do with this machine, I don’t have enough time in the day lol. the print software that comes with machine is OK, I do use it alongside another program as its only basic. at the price of these printers, it would be nice to be given the pro version with the purchase. but unfortunately you would need to pay about 160 a year for it. this is the only disappointment I have.
    all in all, thank you Elegoo for producing this machine, I look forward to more exploration to its capabilities when I’m more experienced myself.

  4. EsmeralHanton says:

     United Kingdom 🇬🇧

    Golden Review Award: 2 From Our UsersThis takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  5. Anonymous says:

     United Kingdom 🇬🇧

    Golden Review Award: 2 From Our UsersThis takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  6. Anonymous says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  7. Anonymous says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  8. Anonymous says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  9. Anonymous says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  10. Anonymous says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  11. Anonymous says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  12. EnriqueKVH says:

     United Kingdom

    This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.

  13. TeraSlivai says:

     United Kingdom 🇬🇧

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  14. Anonymous says:

     United Kingdom 🇬🇧

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  15. Anonymous says:

     United Kingdom 🇬🇧

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  16. LouisaLudowici says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  17. BettyHawthorn says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  18. Micaela says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  19. Anonymous says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  20. MohammePlunkett says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  21. Anonymous says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  22. MaricelBeadle says:

     United Kingdom

    I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
    Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.

  23. JuniorCribb says:

     United Kingdom 🇬🇧

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  24. TeresitBaine says:

     United Kingdom 🇬🇧

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  25. Emma Shacklock says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  26. ClariceBowe says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  27. Anonymous says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  28. Anonymous says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  29. Anonymous says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  30. Anonymous says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  31. Anonymous says:

     United Kingdom

    Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.

  32. ODBEsperan says:

     United Kingdom 🇬🇧

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  33. Anonymous says:

     United Kingdom 🇬🇧

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  34. Anonymous says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  35. Anonymous says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  36. FannieSingletar says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  37. Anonymous says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  38. Anonymous says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  39. Caleb Denison says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times

  40. ErmelinHardy says:

     United Kingdom

    A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
    Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.

    A great quality large build plate printer with fast print times