DEKO 220V Electric Welding Machine MMA Welder for Welding
DEKO 220V Electric Welding Machine MMA Welder for Welding Working and Electric Working (200A)
Why choose our DEKO MMA ARC Welding Machine ?
This is our DEKO 160A MMA Welder which will enable you to obtain a professional finish in welding,
car bodywork, and many other thin steel welding process. With this welding tool, you can now
experience many advantages of the MMA welding process. Don’t hesitate to buy it now!
Feature:
The welding voltage can be continue adjusting to exactly match welding current.
On-off frequency is out of audio frequency,nearly abate the noise pollution.
Special welding dynamic characteristic control the circuit,stable welding arc.
Little spatter,good welding surface,high welding efficiency.
 | |  | |
|---|---|---|---|
| Input Voltage | AC 1-230±15% | AC 1-230±15% | AC 1-220±15% |
| Input Power | 4.1KW | 4.1KW | 5.8KW |
| No-load Voltage | 60V | 60V | 60V |
| Duty Cycle | 40% | 40% | 60% |
| Electrode Diameter | 1.6-4.0MM | 1.6-4.0MM | 1.6-4.0MM |
| Power Factor | 0.93 | 0.93 | 0.85 |
| Usage | Welding Task | Welding Task | Welding Task |
| Protection Degree | IP21S | IP21S | IP21S |
| Weight: | 3.83 kg |
| Dimensions: | 37.4 x 28.6 x 16.2 cm; 3.83 Kilograms |
| Model: | VARUN |
| Part: | VARUN |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | DEKO |
| Dimensions: | 37.4 x 28.6 x 16.2 cm; 3.83 Kilograms |
This is a nice light weight and portable machine perfect for small jobs, the copper tube in the fuse holder is dangerous but can easily be replaced with a 13amp ceramic one, it’s easy to use cables are too short with it lacking the carry strap but other than that no complaints, let’s see how long it lasts.
This is a thin lightweight piece of equipment which does not take up alot of space it makes a difference for people to use even older groups
weight of my old cumbersome one. Weld quality is as good as the operator and can be used with up to at least 6 mm thick steel. Easy to adjust with the digital display and control knobs. Very happy with my purchase.
Note the supplied welding cables are quite short and thin cable so we replaced with thicker and longer cables, along with new clamps etc, which greatly increases the usability for a fairly small cost.
One thing to note, if you do purchase one, check the fitted ‘fuse’ in the plug, see attached image what we found in ours, which is certainly not a 13amp fuse!
Fantastic little welder for my 16 year old son who has just started out, easy to use
I am very pleased with the welding machine, it works amazing. I highly recommend to everyone.
I works well but, its difficult to start the ARC, once it starts , it welds and holds the arc ok, I used a 3.2mm rod , and would say this would be the limit for the machine . I also use 3.2 cast welding rods , again they work well on this welder. Great pitty this welder does not have a strap too carry it .
Fantastic machine ,I’m a carpenter by trade and fancied having a go at a bit of welding , really easy to use and lots of videos using the same machine on YouTube, excellent reviews too,,,, first go at welding was fun , after a few hours practicing I could weld pretty well and even some cast iron too
Definitely a good buy , I would recomend some good gloves and a face mask too
It works well, but the ampage out put can be a bit hit and miss. It is sold as a 200amp, according to the display it does not go beyond 160. Needs improveme
Bought for my picky husband and he likes it so would recommend
Good quality and easy to use. I needed this for a mobile job where I couldn’t use my big welder. This exceeded my expectations.
I read the reviews on this and was thinking that if a works a few times I’ve had my monies worth!
It’s actually brilliant! I’m a total novice but within 15 mins I now have the hang of it!
The only down side and why I gave it a 4 is because the pug had no fuse just a copper bar! I had seen this on the reviews and ppl said all was well
For the price I’m extremely happy
I needed a light compact machine to compliment my Oxford oil cooled workshop welder. This little machne was the perfect choice. I just completed a welding job that had to be performed at the top of a 15ft ladder, this machine enabled this task easily.
Only used a few times, with 1.6 rods and seems to be fine. Wouldn’t weld the 4th bridge. More to follow.
Good price of kit, one of the best out there for the price.
Very compact but works very well
A good strong welder small and portable I find it to be quite eliable thank”.