LIVIVO Steel Garden Bench With Wooden Slats For Outdoor Rust
LIVIVO Steel Garden Bench With Wooden Slats For Outdoor Rust Resistant Garden Patio Park Indoor Furniture Seat Chai
Dimensions: | 125 x 53 x 82 cm |
Brand: | LIVIVO |
Colour: | Black/Natural Wood |
Dimensions: | 125 x 53 x 82 cm |
Can not add photo Anyway it was very easy for one person to put together assembled top bar, bottom bar and then middle bar. Screwed these tight. Then slotted in all bottom ones and a re right then the top ones.
It is a small bench which is just what I wanted for a small garden big enough for 2.
I will rub it down and re paint it when weather improves only because it is too light a colour.
The bench is well made but the Finish on the woodwork is average as the varnish on the slats is not very well finished on the pieces with knots in them , need more sanding then it would be a good bench for the money.
Good value for money!. We bought three of these. The slats are soft wood but are treated . One of the sets we used to make up a bench from our own iron bench ends and they fitted perfectly and far cheaper than buying a set of hardwood slats. The bolts and fittings were good quality. They were easy to make up and look great in their setting.
There are lots of these but this one was good value and looks good, easy to assemble and slightly springy so ok. Store inside in winter! Comes varnished but just sand and stai
The bench is better than the picture. Really pleasing. Looks a picture with lots of colourful cushions.
Excellent value for money comfortably and sturdy only complaint is that there was 3 nuts short in the packet for the bolts
So easy to put together and lovely to sit on so strong
It’s a lovely bench and good value for money. I gave it a light sand and just one coat of oak stain and am delighted with the result. It’s not particularly comfortable but what wooden slats bench is? The advertisement claims that it can be assembled in minutes but doesn’t state how many! Fitting the central support alone takes about half an hour and needs pilot holes drilled and the metal bent to shape. That’s not a job for an inexperienced DIYer.