Russell Hobbs RHVSRCH602B 60 cm Wide Visor Cooker Hood
Russell Hobbs RHVSRCH602B 60 cm Wide Visor Cooker Hood, Black [Energy Class C]
Energy efficient
This cooker hood has a lighting efficiency rating of B, a grease filtration efficiency rating of D, a fluid dynamic efficiency rating of E and an energy efficiency rating of C.
Versatile
This wall mounted cooker hood is connected to the power through the mains, making it incredibly easy to just plug in and go. This also means that the cooker hood can be used in a number of different areas within your kitchen for increased versatility.
Suitable for rooms up to 18m²
This stainless steel Russell Hobbs cooker hood has a maximum extraction rate of 180 m³/hour, perfect for a kitchen of approximately 18m², this cooker hood is sure to be perfect for your home.
Weight: | 6.5 kg |
Dimensions: | 50 x 59.8 x 14 cm; 6.5 Kilograms |
Brand: | Russell Hobbs |
Part: | RHVSRCH602B |
Colour: | Black |
Batteries Required: | No |
Batteries Included: | No |
Dimensions: | 50 x 59.8 x 14 cm; 6.5 Kilograms |
Ordered,and came in few days, installed in 1h (with beer in hand) time. Powerful,do its job. One star off because
1- the hole for exhaust tube is bigger than standard 115mm
2- they should include free carbon filter at least to see how it works fully.
Overall good purchase.
I fitted it but it wasn’t hassle free. The biggest problem was that the vent hole that the plastic spigot fits into is so near the back of the hood that it made it very difficult to fit the hood as far back as it needs to go. I had to machine away the wood behind the hood just to get enough room to attach the ducting. Also the two rear screw holes are very difficult to get to, so I drilled two new ones. Haven’t used it yet as only just fitted it. Looks nice for the money.
Nice looking cooker hood, but it’s rather noisy.
The extractor can be vented to outside or re-circulated by moving a lever over inside the unit.
We changed it so as to re-circulate and purchased a carbon filter that fits on to the motor. You will need to find the 160mm filters and not the 173mm. This model RHVSRCH602SS-M is not listed but the filters fit. They can be slightly fiddly to fit.
RHGCH601, RHGCH901, RHGCH702B-M, RHGCH902B-M, RHGCH603DS, RHGCH903DS, RHICH904DB
**Please note these filters will only fit the listed models with a motors & filter outer diameter of 160mm (where the filter fits). If your motor / Filter has a 173mm diameter instead, then these filters wil not fit. Please carefully check before purchase**
We also use a normal paper grease filter although the unit comes with a washable stainless steel grease filter. No other filters come with this unit and must be purchased separately.
Just as expected to replace my old one. Very fast delivery, in fact it arrived before I received the email to say it has been dispatched. So far so good.
Finally a extractor that actually extracts, this extractor is worth every penny . Very pleased with it.
Would definitely recommend, has great suction. Nice solid controls, love the LED light!!
Very pleased with extractor – looks smart and neat. Three speed extractor but speed 1 will be adequate as very powerful (good fault).
Very pleased with extractor – looks smart and neat. Three speed extractor but speed 1 will be adequate as very powerful (good fault).
Very pleased with extractor – looks smart and neat. Three speed extractor but speed 1 will be adequate as very powerful (good fault).
This was a perfect replacement for my old cooker hood, fits in exactly the same place, does the job for the cheap price I paid.. delivered earlier than expected.. overall I am very pleased with my purchase
This was a perfect replacement for my old cooker hood, fits in exactly the same place, does the job for the cheap price I paid.. delivered earlier than expected.. overall I am very pleased with my purchase
This was a perfect replacement for my old cooker hood, fits in exactly the same place, does the job for the cheap price I paid.. delivered earlier than expected.. overall I am very pleased with my purchase
easy to install, all the holes and mounts are in the standard place. Carbon filter was easy to buy. Phoned Russell Hobbs and bought it straight from them?. I am sure the generic filters would fit, but I didn’t want to risk it!
he only thing against this hood is that the back two fixing holes are NOT easily accessed to fix a screw through with even the thinnest cordless . Otherwise I’m happy with it although I did think it was a rear and top outside extraction as it showed in the pic. I just used the internal extraction and bought filters for it.
he only thing against this hood is that the back two fixing holes are NOT easily accessed to fix a screw through with even the thinnest cordless . Otherwise I’m happy with it although I did think it was a rear and top outside extraction as it showed in the pic. I just used the internal extraction and bought filters for it.
he only thing against this hood is that the back two fixing holes are NOT easily accessed to fix a screw through with even the thinnest cordless . Otherwise I’m happy with it although I did think it was a rear and top outside extraction as it showed in the pic. I just used the internal extraction and bought filters for it.
save the vent ring from your old hood as the diameter ring on this is large
The cooker hood looks very attractive and works well. It was a bit disappointing that the filter was not included in the details – at an extra cost of course but it had to be accessed separately. The only fault with the extractor is that it is so very noisy – hence the 4 star rating.
The cooker hood looks very attractive and works well. It was a bit disappointing that the filter was not included in the details – at an extra cost of course but it had to be accessed separately. The only fault with the extractor is that it is so very noisy – hence the 4 star rating.
The cooker hood looks very attractive and works well. It was a bit disappointing that the filter was not included in the details – at an extra cost of course but it had to be accessed separately. The only fault with the extractor is that it is so very noisy – hence the 4 star rating.
Great extractor looks nice, as advertised and on time. which is more than can be said about the amazon recommended carbon filter which is not for this, do NOT accept amazon recommendations they are usually rubbish.
Like this hood very much, it is very smart, has 2 led bulbs to save energy. I chose black to compliment my black hob. I like the neat control buttons , much better than the slider on my old hood. Because the air is ducted to outside I don’t have to use any other filters. My son fitted this for me and the fittings were pretty much the same as the old one so it only took minimal jiggling to fit perfectly I was concerned that some people reported that this hood was noisy but I can honestly say I didn’t find it so. I doubt if a silent fan has yet been invented so some noise is to be expected but even on the fastest speed it is still quieter than my old hood. Easier to clean too. Well pleased.!
Like this hood very much, it is very smart, has 2 led bulbs to save energy. I chose black to compliment my black hob. I like the neat control buttons , much better than the slider on my old hood. Because the air is ducted to outside I don’t have to use any other filters. My son fitted this for me and the fittings were pretty much the same as the old one so it only took minimal jiggling to fit perfectly I was concerned that some people reported that this hood was noisy but I can honestly say I didn’t find it so. I doubt if a silent fan has yet been invented so some noise is to be expected but even on the fastest speed it is still quieter than my old hood. Easier to clean too. Well pleased.!
Like this hood very much, it is very smart, has 2 led bulbs to save energy. I chose black to compliment my black hob. I like the neat control buttons , much better than the slider on my old hood. Because the air is ducted to outside I don’t have to use any other filters. My son fitted this for me and the fittings were pretty much the same as the old one so it only took minimal jiggling to fit perfectly I was concerned that some people reported that this hood was noisy but I can honestly say I didn’t find it so. I doubt if a silent fan has yet been invented so some noise is to be expected but even on the fastest speed it is still quieter than my old hood. Easier to clean too. Well pleased.!
Fits perfectly where my defunct hyaena hood was saving me from retiling above hob
Have been looking for a cooker hood for ages fit the space we have exactly, we needed someone to fit it but that was do with the way the original was fitted definitely would recommend.
I just love this cooker hood. I didn’t find it noisy at all. Nice style with. 2 cool white bulbs.
Item arrived on time & fits perfectly. Had a bit of trouble trying to get filters for it but connected Russell Hobbs directly who were very helpful.
It works very well but its noisier than i expected i dont know if it will make any difference when i get the filter i have ordered.The filter has arrived i still dont know if the filter makes any difference to the noise because my wife and i have struggled for quite a while trying to fit the filter and we never succeeded so we have given up.
Arrived very quickly, well packed, easy to put up. Very pleased with this produc
Trying to replace a 20 year old extractor without major alterations, we came across the Russell Hobbs extractor which fitted perfectly. This unit works better and removes cooking smells quickly. I am very pleased a very wise buy.
fits in perfectly for our kitchen easy to install the only let down there is no charcoal filter with it and find it difficult to get hold of one
fits in perfectly for our kitchen easy to install the only let down there is no charcoal filter with it and find it difficult to get hold of one
Well its in situ and looks great BUT im unsure if i need a carbon filter as fitter threw instructions away,Im recycling not ducting out HELP