AILCION SUP Electric Air Pump, 20PSI Pressure Paddle Board
AILCION SUP Electric Air Pump, 20PSI Pressure Paddle Board Pump, Intelligent Inflation & Auto-Off Feature, Deflation Functio, DC12V Car Connector, 5 Nozzles for Stand Up Paddle Board, Boat, Pool
With 3.4ft flexible air hose, 5 inflatable ports for various inflatables, it can be used for inflatable stand up paddle board, yoga ball, inflatable boat/kayak, air bed, pool, inflatable Sofas and inflatable tents, etc.
We looked at others but chose this one because we could pump up our kayakes by the car we found cheaper ones had a three pin plug on them
It did the job in no time at all and also deflated when we were finished
Inflated my isup up to 20psi in about 10 minutes as described and took all the hard work out of manual pumping. A bit noisy but to be expected. Good value for money.
Wow, it’s hard to believe that this price can buy such good quality, it is a car charger, put it in the car, it air pump electric very fast, it can charge a boat in a few minutes, and there are 5 different converters. nice!
I am so happy with this pump, I’ve only used it about 5 times so far, but I pumped up 2 SUP with no problems.It is loud but you can talk over it. I don’t think any of these pumps have low inflation volume but that is ok.
I used to hand pump my paddleboard. It took me so much energy especially when the air pressure is getting high inside. Now I just need to hook this gadget up with my board and let it do the job. It shows you the air pressure. It also has a deflate function which makes it easier for you to roll up the SUP after.
Looks great and works great! Highly recommend it.
Easily pumps our two paddle boards after each other, I would say about ten minutes each. I do not have comparison as never used other types but so far happy with this equipment.
Absolutely perfect! Had read some reviews so tried at home first, glad I did as fuse went (after inspection was a 10A in a 15A) tried at beach and worked perfectly.
Saves effort (not necessarily time) well worth the money and looks really cool.
Arrived 2 days early and also just had my third paddle board delivered, this is why I ordered the ailcion pump as it states that it can pump up to 5 boards. I was excited to start. It was easy to connect and to set the pump. It was great went up to 15psi and then I deflated it. The pump wasn’t even warm. Brilliant. I’ve yet to pump all 3 up but we will wait and see. But for now 5*
Will report further next week when I take my grandsons out on the water.
Thanks
So glad I bought this inflator even though it cost a bit more than others but this one has powerful pump. This unit saves time and effort that would normally be spent pumping up manually and tiring you out before even getting on the water. Love the compact and powerful design. Would be nice if it came with a carry bag, but I just use an old duffel bag to keep it clean and easy transport.
This case will hold the Epson WF100, all it’s cables and adapter, along with a Surface Pro 4–and the Surface’s adapter and cables. I have the Surface in an otterbox defender case as well. The Surface can be placed behind the folding file folder. A few sheets of printer paper can be added as well. THATS IT. If you want to add a wireless mouse, you are out of luck. Perhaps a small toiletry kit or cable bag can be attached between the handles of the case to hold the mouse and other small accessories. After all, there is still a carry strap to haul the entire kit and kaboodle in. A bit expensive for the case, but everything fits.
Fits the equipment perfectly with room for a few accessories. I own and operate a tractor-trailer and the case has weathered what could easily be described as a less than desirable environment with flying colors. While it did seem a bit pricey initially, the fit and function have more than justified that in my mind.
I read the reviews before buying this case, so I expected it would be perfect for carrying and protecting the WF-100 on my trip abroad. The reviews mentioned that carrying paper is a little difficult to do, because of the configuration of the case. I decided to get it, and I have to say I love it. I am not having trouble putting paper into it, however, it will carry A4 size as well as 8-1/2 x 11 so I’m going to stock up on paper when I get to my destination. There’s plenty of room for an extra pair of cartridges, and for the cords and a USB cable to connect to my laptop in case there’s no Wifi available. I was thrilled with the printer itself — it really is as light as they say it is. But with this perfect case, it’s magnificent!
Well built and highly over-priced case. I notice that a month after I purchased one (now $80), the price has gone up another 10 Somalians from September’s prices. Sadly, this is a specialty case. These are mass-produced (probably in China) for a small fraction of the selling price. This should be a $20 item. Other than the ridiculous pricing on this case, I can recommend it for its perfect fit of the W-100 components.
So, I suppose if you have the need for this high-priced portable printer, then paying a high price for the case is no big deal?
We looked at others but chose this one because we could pump up our kayakes by the car we found cheaper ones had a three pin plug on them
It did the job in no time at all and also deflated when we were finished
Inflated my isup up to 20psi in about 10 minutes as described and took all the hard work out of manual pumping. A bit noisy but to be expected. Good value for money.
It pumps my 11ft x 32in x 6in board in exactly 12 minutes. I think this is good performance compared with others i have seen people use.
Auto cut off. Sleek. Lightweight.Portable.
plenty nozzles to inflate other products, kayak, airbed etc.
No carry bag but small rucksack would do it. Haven’t used deflating setting yet
Happy with the product for the price paid
well, it looks lovely and the quality is satisfactory. It works a treat and save a lot hassles .
it’s great for paddle boards but can serve multiple purposes with 5 nozzles. it has both functions to inflate and deflate hence very convenient.
It’s simple to use and handy to carry around.
It’s a recommendation from me.
Wow, it’s hard to believe that this price can buy such good quality, it is a car charger, put it in the car, it air pump electric very fast, it can charge a boat in a few minutes, and there are 5 different converters. nice!
It feels really robust, it inflated 3 Sups quickly and didn’t even feel warm! Would thoroughly recommend
I am so happy with this pump, I’ve only used it about 5 times so far, but I pumped up 2 SUP with no problems.It is loud but you can talk over it. I don’t think any of these pumps have low inflation volume but that is ok.
I used to hand pump my paddleboard. It took me so much energy especially when the air pressure is getting high inside. Now I just need to hook this gadget up with my board and let it do the job. It shows you the air pressure. It also has a deflate function which makes it easier for you to roll up the SUP after.
Looks great and works great! Highly recommend it.
Easily pumps our two paddle boards after each other, I would say about ten minutes each. I do not have comparison as never used other types but so far happy with this equipment.
Absolutely perfect! Had read some reviews so tried at home first, glad I did as fuse went (after inspection was a 10A in a 15A) tried at beach and worked perfectly.
Saves effort (not necessarily time) well worth the money and looks really cool.
Arrived 2 days early and also just had my third paddle board delivered, this is why I ordered the ailcion pump as it states that it can pump up to 5 boards. I was excited to start. It was easy to connect and to set the pump. It was great went up to 15psi and then I deflated it. The pump wasn’t even warm. Brilliant. I’ve yet to pump all 3 up but we will wait and see. But for now 5*
Will report further next week when I take my grandsons out on the water.
Thanks
So glad I bought this inflator even though it cost a bit more than others but this one has powerful pump. This unit saves time and effort that would normally be spent pumping up manually and tiring you out before even getting on the water. Love the compact and powerful design. Would be nice if it came with a carry bag, but I just use an old duffel bag to keep it clean and easy transport.
This case will hold the Epson WF100, all it’s cables and adapter, along with a Surface Pro 4–and the Surface’s adapter and cables. I have the Surface in an otterbox defender case as well. The Surface can be placed behind the folding file folder. A few sheets of printer paper can be added as well. THATS IT. If you want to add a wireless mouse, you are out of luck. Perhaps a small toiletry kit or cable bag can be attached between the handles of the case to hold the mouse and other small accessories. After all, there is still a carry strap to haul the entire kit and kaboodle in. A bit expensive for the case, but everything fits.
Fits the equipment perfectly with room for a few accessories. I own and operate a tractor-trailer and the case has weathered what could easily be described as a less than desirable environment with flying colors. While it did seem a bit pricey initially, the fit and function have more than justified that in my mind.
I read the reviews before buying this case, so I expected it would be perfect for carrying and protecting the WF-100 on my trip abroad. The reviews mentioned that carrying paper is a little difficult to do, because of the configuration of the case. I decided to get it, and I have to say I love it. I am not having trouble putting paper into it, however, it will carry A4 size as well as 8-1/2 x 11 so I’m going to stock up on paper when I get to my destination. There’s plenty of room for an extra pair of cartridges, and for the cords and a USB cable to connect to my laptop in case there’s no Wifi available. I was thrilled with the printer itself — it really is as light as they say it is. But with this perfect case, it’s magnificent!
Well built and highly over-priced case. I notice that a month after I purchased one (now $80), the price has gone up another 10 Somalians from September’s prices. Sadly, this is a specialty case. These are mass-produced (probably in China) for a small fraction of the selling price. This should be a $20 item. Other than the ridiculous pricing on this case, I can recommend it for its perfect fit of the W-100 components.
So, I suppose if you have the need for this high-priced portable printer, then paying a high price for the case is no big deal?