Reboot MIG150 MIG Welder 150A 4 in 1 Gas and gasless

I was abit nervous with buying a cheaper welder but from seeing a few good reviews on social media from people who have never welded I thought id try it my self. Well the gasless welding I was surprised how good it actually is and with hardly any splatter, it’s fantastic also you can use gas if you wanted, it’s a 4 in 1 welder as stated and it works really good I know this because I’ve welded new sills onto my van, im happy with this and would recommend it.

Just bought this four in one welder as my wolf as just packed up I set it up with the 1mm flux core wire which was a little fiddly as I have big hands and feed the wire through I thought it was not feeding as it was so quiet or it could have been the noisy fan. Feeds very slowly but very smoothly compared to some of the mig welders I have used. So I cut some 20×2 mm angle and did a test weld could not believe how smooth this little welder is I cannot wait to get a bottle of argon and try the tig set up only downside to this kit in a box I only received one 1mm tip but I can live with that. I have worked as a welder for over forty years and for the money you can’t go wrong

Simple to operate and carry. Needs plugging though. Feels well made. I’m no expert, but have done some ok welds with it already.

Per chi gi in possesso dei rudimenti della saldatura, nessun problema.
Ottimo rapporto prezzo qualit.

Certainly does what they say, used continuously for a couple of without any problems

Everything worked as it should ,great value and easy to use

I weld for a day job with plants that cost thousands of pounds but I needed a little flux core welder for 1 job welding up a chassis outdoors. I’ve only done a small test with it so far but I can already tell it’s a great little machine. Easy to use, welds nice and the wire that comes with it will be perfect for most hobbyists. Just make sure you read the manual and get your polarity correct. No complaints from me.

I welded an offroad bumper for my toyota 4runner with this welder and it worked great. Search “Aram’s Channel” on YT for a video of me welding!

es surprenant par son efficacit et sa lgret..trs bon achat.

What a good little welder no a welder my self but found it easy to use with the controls

Iniziamo dai pregi.

Comodit.
I cavi sono abbastanza lunghi, per un uso Hobbistico sono pi che sufficienti per “dimenticarsi” la saldatrice sul proprio banco di lavoro; per riparazioni sul campo possono risultare di lunghezza limitata.
Anche nel secondo caso la lunghezza comunque ragionevole considerando il prezzo complessivo del prodotto.
Ci sono anche settaggi specifici in base al diametro degli elettrodi che si utilizzano.

Resistenza.
Ho avuto modo di usarla per periodi prolungati di tempo e non ha dato segni di surriscaldamento o altro; anche in un uso intensivo la saldatrice mantiene la sua potenza inalterata ( l’elettrodo si fonde sempre nella maniera ottimale.)

Qualit dei materiali.
Il porta elettrodo molto ergonomico e di ottima qualit, solamente le persone con mani molto grosse posso trovarsi in difficolt nell’impuglarlo.
Nonostante il peso l’involucro della saldatrice robusto e in grado di sopportare piccoli “maltrattamenti”; nel limite del ragionevole ovvio.

Difetti.

Facilit d’uso.
Il manuale di istruzioni in inglese e poco esaustivo.
Alla prova del prodotto non riuscivo neanche a innescare l’elettrodo facendomi iniziare a disperare.
Dopo varie prove empiriche sono riuscito a comprendere la macchina. (Spiegher tutto pi avanti.)

Mancanza di accessori di base.
La confezione risulta priva di maschera e spazzola, obbligandovi a comprare tali oggetti in separata sede.
Non ha una custodia rigida, per cui vi consiglio di trovarle un posto “sicuro” nel vostro magazzino/ripostiglio.

Consigli.
Non disperate se la saldatrice non innesca al primo utilizzo.
Sotto il display trovate tre colonne, guardate quella di estrema destra impostataela, attraverso il relativo pulsante, nel pallino di centro.
Mi ripeto, CENTRO.(Non mi ricordo esattamente la scritta, ma quella colonna dev’essere impostata su -off-, lasciando perdere l’impostazione TIG e quea che cita ON nella riga.)
Fatto questo la saldatrice inizier a lavorare come si deve.

Potete incappare in un altro inconveniente: la saldatrice cambia i parametri da sola.
Mi capitato, in pi occasioni, di modificare il settaggio della macchina e come per magia, dopo pochi secondi e con mio grande sconcerto, la vedo tornare sui parametri di base.
Dopo aver tirato gi qualche santo dal calendario per farmi aiutare, mi accorgo che la saldatrice ha una funzione di salvataggio.
Dopo aver impostato la macchina secondo i vostri bisogni schiacciate la manopola con cui cambiate la potenza della macchina, noterete che la manopola si sposter all’interno con conseguente click.
Quella la funzione di salvataggio, se non effettuate tale procedura la saldatrice torner inevitabilmente sui precedenti parametri.
Io la uso nel controllo automatico di corrente e non mi sono trovato mai male, l’elettrodo non sembra incappare in problemi di temperatura.

Proprio questa difficolt di utilizzo fa scendere a quattro stelle la mia valutazione.

I don’t claim to be a professional welder Last welder I had was well over 10 years ago it was a cheap harbor freight mig flux or gas Twice the size and twice as heavy When I got the box I was quite alarmed because it was so small I couldn’t believe the welder and everything I ordered fit in the box. Upon opening it was Not damaged. Only thing is it did not come with .08 wire as stated it came with .1 I did buy a spool of .08 wire flux cored as a part of a package deal with a yes welder self darkening hood great hood also when I bought this welder. and that’s what I’ve been using. I was concerned because I was running it on 120v power not 220v. Wanted to weld so all I had laying around as I was excited to use it was a Simpson strong tie bracket probably 3/16 of an inch thick galvanized. Found a three-quarter inch conduit clip plugged in fed the wire connected ground clip turned it to its lowest setting presto. I was quite impressed not the best looking weld but it did not burn into the clip or melt everything around and didn’t spatter like crazy it did a really good job. Then I decided to play around wrote a little love note to my wife as she got this for me as a Christmas present. I’ve then decided to run it a little hotter didn’t wanna blow a breaker and welded a ring to the bracket at 50 on display. Somebody ran into the fence around my house before we moved in I decided to tackle welding it as it is a metal fence backed my truck up grabbed my come along pulled the fence back into place as best I could. Grabbed my 3500W generator 3000w continuous 3500w peak and 20 amp breaker. left the welder where it was set at 50amps changed the -3 on voltage to 0. Grabbed the mig gun and away I went with a crowd of cows watching pressure was on to get this right. Welds weren’t the best as my skills are a little rusty but at this point Amazing truly made me feel like a professional I could go anywhere and weld just about any light steel project. Oh and the chair another one I welded at its absolute lowest setting and before it was the chair that sat in the back hopefully no one would use now it’s the one I trust the most. This 1550D really works on flux wire haven’t tried anything else yet. I would definitely recommend this to anybody I know.

per uso hobbistico e perfetta ,salda tranquillamente 2,5 3.2 ,utilizzato per fare qualche lavoretto e comoda ,avevo altre 2 diverse ma devo dire che questa funziona bene , senza pretese ovviamente

To date I’ve only had the opportunity to use this MIG welder once, but I am quite pleased with it so far. It’s a really awesome little welder. I am very surprised by its performance. I like this little welder far more than I thought I would.

I used this welder to repair a somewhat large and weighty gate, and I was pleasantly surprised by how easy this welder is to use. And it did a really good job too. The welds turned out perfect. And with only about an hour of work, the gate is as good as new. And after a little grinding and some spray painting, you can’t tell the gate was ever broken.

Also, just so you know, while this unit is technically able to run on 110V, if at all possible, set yourself up to be able to run it on 220V. Running it on 110V won’t give you the power/heat you need for a lot of jobs/situations. Running it on 110V will definitely prevent you from taking advantage of this welder’s full potential.

Given the super low price of this welder compared to name-brand, “high-end” welders, I really don’t see how you can go wrong with this unit. I really do think it’s an exceptional welder for the price.

If you have any questions about this MIG welder, please feel free to ask, and I’ll try my best to answer. I hope you found this review helpful.

Un buon prodotto lo consiglio vivamente a chi ha bisogno di una saldatrice a un prezzo combinabile.

There’s a lot of confusion on how the product works and what is required to use it so thought I would clear up a few things for info sake.
1.This welder ships with everything shown in the last picture. Its in a ready to weld stick(arc) and mig flux core (no gas) state with a .030 tip installed. Just add flux core wire. (Exept for the possibilty of line 2 below)
2. Mine shipped with 2 identical .030/.035 smoth v groove wire drive wheels (smooth v is for solid gas wire) but I’ve read they can ship with a grooved wheel as well for flux core wire (better traction without crushing the wire). I have been using flux wire with the smooth wheel however with no trouble yet.
3. Obvious point but in will say anyway for new to welding people, for Gas Mig this unit will require an a mixed gas bottle and a regulator/flowmeter with about a 1/4″ id barbed output fitted for the supplied hose to welder. Also remember to switch front wires to set the welder to DC positive electrode for gas mig (flux core requires the wire feed to be DC negative). Install solid .030/035wire as well. (Change the tip to correct size wire as well. You can also weld with .26 wire no problem with this machine if you acquire a .6mm wire feed roller. Currently this is a good source for the exact roller needed. https://www.ebay.ca/itm/402621010886
4. Yes, the voltage and wire speed are married, and one changes with the other by default, BUT if you cycle the Volts/Inductance button, on the right side of the welder, to “V” you can reduce or increase the volts compared to wire speed in a range from -5v up to +5V which is more than enough to fine tune. For most welds the default Wire speed/volts relationship works great.
5. For TIG welding you will require a WP17 Tig Torch and a Gas Tank with Argon. Sold separately from many vendors including The Reboot Store. Important to note that this is a lower end unit and it does NOT control gas flow or arc voltage for TIG. Gas flow is done in this case by the valve on the TIG torch and welder in TIG mode will be constant on at full chosen voltage with a LIFT start method used to start the ARC. This means you will NOT use the arc trigger on any of the TIG torches (connection from torch will be left unused) and the torch gas line will connect directly to the gas bottle, not the welder as it has no gas flow control under TIG operation. You will simply connect the Tig Torch lead to the Neg- front plug and the ground lead to the Pos+ front plug . Your tig torch choice will have either a female or male treaded gas hose end, neither of which will work on a barbed hose connection, for the supplied clamped gas line (if you chose to buy a regulator with and output fitting to use a clamped line like supplied) and you will need to buy the correct output fitting for the threaded TIG gas line or remove the threaded end from the hose and clamp to the barbed output on the regulator.

I hope this helps some byers.

Purchased this product in January 2021 and when I turned it on this time, 3 sparks and it stopped working all together.
All I did different was blow it off with air when it was shut down
Said it was under warranty, but yet to get a hold of anyone.
Was very happy with it until this problem.

This is the very first weld straight out of the box. I didnt clean it up for the review. I highly recommend this for a beginner. Awesome welder for a bargain price!

This welder was a gift for my husband his old welder wore out and he needed one asap as he was in the middle of a progect our local dealer could not get one for several weeks and certainly not at this great price He seems to be very happy with it very surprised with how well it works and how light it is . Thanks again Amason for safeing the day.

Rund ums Haus, am PKW oder mal eben einen Gartenzaun schweien,
dafr eignet sich das Stab Schwei Gert von REBOOT-EU. Das Schwei Gert
wird mit 1 Schwei Kabel mit Elektroden Zange, 1 Minus Kabel mit Klemme
von je 1,5 Meter geliefert. Das Strom Anschluss Kabel hat einen 2 poligen
EU Stecker, also kein Kraftstrom Kabel. Der Eingang Strom betrgt 220 Volt 60 Hz,
Der Nennausgang ist 23A/220 Volt. Mit dem VRD Schutz wird die Ausgang
Spannung auf unter DC 15 Volt reduziert. Fr Stab Schweien braucht man einen 6015,
6013 oder einen 7018 Stick und es eignet sich fr Elektroden von 2.0 bis 3,2 mm.
Es besitzt einen MMA WIG Wechselrichter, und mit der Lift TIG Funktion unter Zugabe
von Argon Edelgas kann ich Edelstahl von 1 bis 6 mm schweien. Oder man nimmt
gleich eine passende V2A Elektrode. Mit dem Hot Start wird der Lichtbogen erhht,
somit ist das zu bearbeitende Werkstck und die Schweinaht besser zu sehen.
Die Mae des Schwei Gertes sind 31 X 12 X H 26 cm.
Alles ist hochwertig und ich kann das Gert nur empfehlen.

This welder is a good buy works extremely well for the price only downfall does not come with tight torch