GALAX PRO Circular Saw, Mini Circular Saw 705W 3500RPM
GALAX PRO Circular Saw, Mini Circular Saw 705W 3500RPM, Laser Guide,115mm Blades, Cutting Depth 28mm(45°) 42.8mm(90°), Ideal for Wood, Soft Metal, Tile and Plastic Cuts
Specifications:
Voltage: 230V/50HZ
No Load Speed: 3500 rpm
Rated Power: 705 W
Saw blade diameter:115mm
Max Cutting Depth: 90°: 42.8mm, 45°: 28mm
Bevel Capacity: 0~45°
Package contents:
- 1 x GALAX PRO mini circular saw
- 1 x 24T blade for wood
- 1 x 60T blade for soft metal
- 1 x Diamond blade 60T for tiles
- 1x Hex key
- 1 x Dust suction pipe
- 1 x User manual
Weight: | 3.48 kg |
Dimensions: | 41.5L x 13W x 26.5H centimetres |
Model: | 766V-L |
Part: | 766V-L |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | GALAX PRO |
Dimensions: | 41.5L x 13W x 26.5H centimetres |
Cuts very well and will be up there with the bes
The good news: Decent build, compact design, fairly easy to use.
The bad news: Almost impossible to find the original disc size – 115 x 10 replacements?
First one returned as laser didnt work, second one excellent, thankyou.
Love this circular saw , i have used it so much , cuts great , and is quick and very accurate. It’s my go to saw. Great value for money.
Everything fine for now. I think it’s a good buy
Never used anything like this before so nothing to compare it to but I managed to get some good cuts with it.
Only problem I have had is the cutting plate…it has a ruler on it to adjust the cutter….once you have locked it in place a few times the numbers wear away when you tighten the screw into place.
Otherwise a great little saw
Bought to complete a job involving 3 cuts at 2.4 metres and 10 cuts at 1.2 metres. Flew through all I chucked at it with no problems. Even the dust extraction worked really well.
The only negative point for me personally was the grip. However if I was 6 feet tall and not 5 feet 7 inches I think it would have helped.
Excellent tool done exactly what I wanted it to do in very quick time. I had to cut up an old floor from a large wooden shed and I’ve never used a tool like this to do it but found it to be very easy. Make sure you read the safety stuff in the book first to avoid any accidents.
Light accurate and great 4 the job i needed 2 do. Value 4 money 4 a diy person. Brill 4 repairing decking.
Great product at a good price. Just what I needed and does a great job on all wood. 3 blades for different jobs.love i
Does exactly as expected, has plenty of power and slices through 20mm MDF like butte
Great saw saved me loads of time rather than a hand saw , fine cut gives a great finish, would recommend.
Very pleased with this..a bit bigger and heavier than I was expecting so not as easy to manoeuvre as I anticipated but it’s a powerful beast and comes with good quality blades…delivered quickly too
Fair price and does the job. Ideal for those small trim jobs.
Purchased for my husband he is always using it he thinks it is brilliant.he says it’s a nice smooth cut ,I cannot comment further as l don’t use DIY tools
One of the better mini circular saws I have used
I like that this has a laser guide on it. It has really helped me to get straight cuts as I have always struggled to do that without drawing a straight edge with a pencil first. The cutting depth is adjustable depending on what the bevel has been set at – I’ve only needed to use it for 45 and 90 degree cuts and found that it can go as deep as an inch. It is pretty lightweight so can be operated using just one hand very easily too as that was a worry when I first bought it. My only gripe with this as it is with all Galax products I have bought is that they don’t come with a case.