Waveshare 10.1inch Capacitive Touch Screen LCD (E
Waveshare 10.1inch Capacitive Touch Screen LCD (E), 1024×600 Resolution HDMI IPS Fully Laminated Screen Support 10-Points Touch for Raspberry Pi, Jetson Nano, And PC
| Weight: | 600 g |
| Dimensions: | 29.39 x 29.11 x 5.21 cm; 600 Grams |
| Brand: | Waveshare |
| Batteries Included: | No |
| Manufacture: | Waveshare |
| Dimensions: | 29.39 x 29.11 x 5.21 cm; 600 Grams |
| Reference: | 10.1inch HDMI LCD (E) |
Pros: excellente qualit cran tactile. Bonne qualit dfinition image. Installations matrielle et logicielle assez faciles.
Cons: le petit bouton l’arrire de l’cran, indiqu on/off, mais comment dans la littrature comme bouton de rglage de la rtro illumination (dim) en fait ne fonctionne que comme off/o
The monitor is awesome, ultrawide 11.9 I’m using it for a custom build. Phantex ethoo 719 with dual motherboards running windows 10, Mac Mini, Chrome OS. All in one towe
Didn’t want one of those bare-bones models. The case does feel a little cheap, but good enough to keep components inside safe.
Bought this screen as it is the largest version of the streched screens. 1480*320 (or 320*1480). Using it as a Aida644 stats screen on Win10. Works perfectly through HDMI and power over usb. Cables and connectors are included ! (it doesnt show on the pictures for this specific screen, so this was a great doubt for me when I bought it. But they are included!) Very happy with it.
I bought this as a status display in my PC case. It works fine in this role once Windows is running, but a big disappointment is that it is useless for the computer BIOS because it defaults to portrait and the BIOS is unreadable with only 400 pixels width. Not sure if 400 pixels height would be enough, but certainly a much better chance! It is simply crazy that a wide aspect monitor like this defaults to portrait. While I can imagine a few specialist uses for a long, tall display, the vast, vast majority will be used in portrait and this should be the default!
PS: If anyone knows a way of fixing this I would be most grateful. I have a NVIDEA RTX graphics card on a Gigabyte Aorus X570 motherboard.
Top scherm, Werkt perfect op de raspberry 4. Alle connectors worden meegeleverd. Vrij gemakkelijk aan de gang te krijgen. (letterlijk instellen wat er in de manual staat en het werkt) Snel geleverd. zeker een aanrader !!!
Connected this via an HMDI cable to my Windows10 Pro Aliens PC I was building to give it the intended look, and it was plug and play. Used a mini USB to USB-A cable to provide power (via an internal USB port) and it worked well. If future projects arise, I would have no problem using this brand/size of mini monitor again.
Pretty good value but: 1) my stand keeps collapsing, and 2) the HDMI cable is quite short so I bought a longer one separately.
This unit came as described and was a great buy… already in service and I am very pleased with the purchase
Works nicely as an extra monitor to display aida64 sensor panels. Overall quality seems nice enough. Was a little dim out of the box but brightness is plenty adjustable and after tweaking that it looks pretty nice.
Using this as a third screen for my limited space PC setup. I especially use it for work. It can also be used as a stream deck or a good way to hold all your icons and leave your other screens free. The functions are endless really. Wouldn’t recommend using it for videos though using it with spotify or something similar is cool because you can have your playlist out of the way of work or streaming or whatever. Display is decent but it has its limits. Might have to do some tweaking with colors depending on what settings you have on your system but I find it works phenomenally for my uses. Also, mounting is a bit of a chore but I recommend finding a smaller table mount of some sore and using that just take into consideration the cords on the right side of the device. I mounted it to my center pole that has my monitors mounted to it as I have them mounted fairly low but the pole goes a bit above them so there is room. I used the DHYSTAR Tablet mount holder. If you but that holder, use normal cords and not 90 degree cords. It will fit perfectly with the cords going directly through the gap. The only bad part is accessing the buttons on the side though, if you fix your settings before mounting, it shouldn’t be an issue. 5 stars. Buy this thing.
Cannot complain here at all – the monitor is great value – though there is a little flexing in the plastic back.
Thats important, as I have it mounted on a vesa arm and have to grab it somewhere.
Resoultion is a little high for this size (15 inch) – sugget you use ‘pixel doubleing’ on a pi.
Was simple to convert to 12V DC – just use the plug with a 12v battery (dont forget a fuse/breaker)
I used epoxy to glue some of the edges as the monitor will be used on a boat, and I didnt want moisture getting into it – my choice though – for home use its fantastic!
This has worked very well for the purpose I bought it for.. I thought I would use the touch screen option, but I didn’t. I am using the hdmi out from my 3090 to run this, and it is amazing as a monitor for pc. I would definitely recommend it if you are looking for an external screen. You can probably mount it on the inside of the pc, but I would rather have it in front. I wanted to flip it because my Pc is on the right side, but the back stand doesn’t allow for it.. so the cables go from left to right.
I really like this monitor! its small and works great. the only thing I would agree with others is that the stand is really flimsy so any small little nuge will knock it down but other than that the monitor itself it worth a investment if you are looking for something small that doesn’t make that much space. Also something else that I like is that it is touch screen! I personally use it as a stream deck.
Super produit mais j’ai du le renvoyer ma vue ne suis pas.. le format est vraiment intressant pour l’utiliser en barre graphe pour mon DAW sur Cubase de chez Steinberg… Le mme en 21 pouces de longueur et 5 ou 6 pouces de hauteur serait parfait…
Super Bildschirm nutze ihn um mir bestimmte Werte meines PC System ber Aida64 anzeigen zu lassen. Das beigelegte HDMI und Micro USB Kabel sind etwas sehr kurz daher ist es ratsam gleich welche dazu zu bestellen in der passenden Lnge. Der Standfu ist ok aber auch kein Hit, rutschte auf dem Schreibtisch hin und her. Ein passender Tablet Stnder ist da angenehmer. Ich wrde mir das Produkt jederzeit wieder kaufen.
Great little screen ,perfect for the project I had in mind. Very happy with this purchase.
It’s not easy finding a good quality 11.6″ touch screen. This ticks all the boxes, without costing a fortune.
Am using it for a control panel on a flight sim, so it’s an added bonus that it has 75 x 75 VESA Mounting holes.
It has a clear picture and a nice responsive touch screen. As it is only 12V 1A I can run it from an existing USB-C port
and save another plug socket. I would certainly recommend this monitor.
it is ideal , as additional monitor, on the computer, for looking at setting
I used as monitor screen for my computer after I used it as a display screen for my senior projec
The documentation in Waveshare’s wiki is really good, as opposed to the usual cryptic pdfs from other manufacturers.
Build quality and performance of the screen are excellent (tested on RPi 2 and 4).
J’ai beaucoup hsit mais je ne suis pas du malgrs quelque inconvnient qui me sont propre !
l’cran est assez bien de bonne qualit, le boitier et bien fini.
On pourra selon les besoins regretter l’absence de petit haut parleur intgr au boitier.
Le tactile est trs ractif est extrmement prcis, sous Windows avec une rsolution de 1920×1080 les icnes sont tout petit et pourtant le tactile ne tape jamais cot, mme dans les menus la slection se fait parfaitement .
les seuls inconvnients est le temps d’allumage une fois branch le microsystme est lent se charger prs de 5 seconde avant d’avoir l’affichage.
Autre inconvnient, mon ancien cran de la mme marque a les prises cot droit et il si on met un connecteur hdmi coud il est a 270, donc cble partant vers l’arrire, or avec cet cran le cble part vers l’avant, il faut donc un cble a 90 .
ice display. It works as intended. It is a plug n play with my raspberry pi. No drivers needed.
picture quality is relatively good.
Its easy to use, touch screen works well, its a rugged and sturdy case. I use it for coding my projects and there hasn’t been any issue on my monitor. Its a excellent product for me cause I just use terminal most of the time.
I purchased this monitor to control an Intel NUC i5 which I use to control my telescope. I was remoting into it with Google Chrome Remote Desktop from a Samsung Tab A Tablet, but if it booted up into a fault state, I could not connect to it over my local network and had no visibility into why it was not working. Using this monitor, I can see and control the NUC perfectly albeit the size is only 7″ and hard to touch small buttons and links. This monitor booted up fine and I was able to see what the problem was and fix it. This monitor package is perfect for outside in the evenings dew. There are just a couple of ports exposed which I can put a small piece of tape over the open ports to protect it from the dew outside while doing astronomical imagining. I can protect it much better than I can using my laptop pc.
Au premier abord, c’est un peu cher pour ce que c’est, mais une fois branch tout fonctionne tout seul, pas de drivers, prise en charge de toute les interfaces tactiles windows five-points, a priori raspberry, etc. aussi. Le tactile peut parfois s’endormir un peu, mais a dpend un peu du systme qui est derrire.
Trs pratique si l’on veut faire rapidement une installation sans clavier ni souris, bref transformer votre pc en tablette.
I was looking for a screen that I could use for my Raspberry PI and had previously bought a display which I didn’t like partly because it didn’t have a case and wasn’t really as responsive as I thought. Waveshare ticked the boxes for me in terms of the ruggedness of the enclosure and the fact that I could use it for my Macbook Mini as well which just serves as my media player. Some people have complained about the stand but I really didn’t have any issue with it to be honest. The display is quite great for the size and the touch isn’t as bad as I read in some reviews. All in all for me, this was a good buy. I am liking it so far!
The screen is really clear and visible at wide angles. The complete unit feels strong and well built with the exception of the wobbly stand. It’s a handy feature to have but struggled to stay on the more upright position. That’s not to take away from the responsive touch screen.
Was really easy to get working with my raspberry pi 4 too. Useful cables supplied to get you up and running quickly. Would have loved to have wall mount holes on the back but it’s a compact unit and should be easy enough to mount if you need to.
I use this as a monitor for computers that are in vehicles, are usually mounted in the trunk, and don’t have easily accessible ports besides one USB and one HDMI. This monitor is powered over USB-A to Micro USB and a full size HDMI port. The included cables are 1 foot and includes one HDMI cable and one Micro USB cable. This allows you to view the device but if you desire to use touch you will need to provide a second Micro USB cable to plug into the touch port.
I would not expect exceptional picture quality from a 7 inch monitor but it is passable.
Esta muy bien. Los cables quiz algo cortos.
He comprado unos a 90 grados ms largos y perfecto.
No me gusta que si quieres que sea tctil tenga que ser la pantalla principal. Desconozco si habr forma de hacerlo tctil de otra manera
I have a setup where my home PC and work laptop share a main monitor. The home PC is a desktop, and I wanted to be able to still control music or whatnot when my work laptop had control of the main monitor. I figured I’d risk this for the price, and was amazed at just how great this is! It set up without needing any special effort, my Windows 10 PC recognized everything and it worked right off the bat. The touchscreen didn’t work at the start, but I googled calibrating a touchscreen and found how to activate it (the touchscreen turned out to not need any calibration). Anyway, I’ve used it all week and wish I’d done this sooner!
brauche diesen Monitor fr eventuelle Updates oder PWT nderungen bei Mini PC’s die gewisse Steuerungen bernehmen sollen. Bis jetzt musste ich Bildschirm, Tastatur, Maus und div. Kabeln Netzgerte usw. mitnehmen. Es war bei der Lieferung ein Infopapier mit QR-Code dabei und damit perfekte deutsche Informationen. Der Monitor hat 2 Micro-USB Eingnge, einen nur fr Stromversorgung zB. vom PC oder externe Stromversorgung (installiert nichts am PC), oder den zweiten fr die Touch Funktion, diese Verbindung lsst den Bildschirm erkennen und versorgt gleichzeitig mit Strom. Es wird eine eigene Bildschirmtastatur installiert und der Bildschirm mit Touch funktioniert prima. Es sind zwar div. Kabel inkludiert, fr mich zu kurz, kein Problem, lngere USB und HDMI mitgenommen und fast in der Jackentasche untergebracht.
Fr kleinere Einstze perfekte Lsung.
Used as a second monitor in my motor racing sim rig – perfect for the task.
Ik gebruik het toestel, als touchscreen voor mijn “Asus Tinker Board” (volumio), en het werkt out-of-the-box zonder enige aanpassing (enkel volumio getest). Voor deze toepassing ideaal (contrast/helderheid). Enige minpunt voor mij is het nogal labiele staandertje.
Works absolutely brilliant. Just plug and play. It works as touch screen and display for my htpc to stream music.
Excellent product.
Exactly what i was looking for to make an external monitor for my AIDA64 dashboard. It needs to be power supplied by a micro usb. Signal via HDMI. You can set your pc to cut the power to USB outlets so that when you turn your pc off the screen goes off too, otherwise there is a power button on the right side
Nach dem Kauf wird man informiert das das Display innerhalb von Stunden irreparabel ein rennen kann. Innerhalb von 1-2h….
Das ist schon etwas krass….
Insgesamt bin ich bisher sehr zufrieden mit dem Gert. Natrlich ist die Bildqualitt nicht vergleichbar mit einem 500 EUR Monitor aber fr den Preis und meinen Einsatzzweck vollkommen OK.
Een schitterend 7″ scherm van betere kwaliteit dan mijn 7″ tablet.
De installatie op een raspberry pi 3B ging moeizaam maar is eenvoudig als je weet hoe het moet (alleen config.txt aanpassen).
De installatie handleiding met engels en chinees door elkaar is, zeker door mijn gebrekkig chinees, verwarrend!
Lots of value for the money here. It doesn’t come with all the wires you need to enable the touch screen though..so make sure you have those. Cheap and it works. I use it with my stick computer to read our orders and print labels.
The screen stand is way flimsy and only has 2 adjustments. This is a budget model folks. But it’s fully encased and works. You could even set it on your own stand if the existing one isn’t doing the trick.
very happy with this display. Worked really well with Raspberry PI.
For a long time I’ve been searching for a small touch screen display for one of my projects that runs on a Windows mini pc. I bought a couple other 7 inch displays that claims that worked with Windows but I could never get the touch screen to work. This one worked right of the box no drivers, no calibration. Good quality, good resolution, Great little display.
Pro tip: with Windows you’ll need to calibrate it with a system search for “Calibrate screen for pen or touch input” to get the touch screen function to work properly.
1. When there is nothing plugged into the screen, the screen will turn off and on repeatedly, until something is plugged in.
2. When I plugged this into my 2016 13inch macbook pro (usb c to micro usb to power the screen, and usb c to hdmi for video) it overloaded my macbook and it shut down, and I wasn’t able to turn it back on for almost an hour (scared the crap out of me). I dunno what caused it, but not gonna do that again.
3. The built in stand is crap. it only has one angle and it isn’t adjustable, only one angle. And the angle is at about 45 degrees so you have to be pretty close to it in order to see it dead on if your using it on a table.
out of those 3 quirks the only one that really bothers me, is the stand. I wish they included either a tripod mount on the bottom or back, or a vesa mount. I solved this by just putting velcro on the back. If they sold a newer version of the same exact monitor but with a mounting option i would buy it in a heartbea
Die Touchfunktionen nutze ich nicht, daher kann ich dazu nichts sagen.