Coco Loco Wetsuit Repair Kit, Easy Iron On Patch For All
Coco Loco Wetsuit Repair Kit, Easy Iron On Patch For All Neoprene Wetsuits & Drysuit Kit (10x30cm)
Coco Loco Wetsuit Repair Kit, Easy Iron On Patch For All Neoprene Wetsuits & Drysuit Kit
Coco Loco wetsuit repair kit is an easy way to repair & reinforce all wetsuits & neoprene kit in seconds. Fix small to large rips, tears, holes, reinforce stretched & worn areas on anything made of neoprene, yulex or lycra with ease. This multi-purpose patch can be applied to a variety of items such as waders, booties, gloves, swimsuits, tri kit & pretty much anything that the fabric will adhere to.
Unlike traditional wetsuit repair kits, there is no need for toxic neoprene glues, pre-cut patches or 12-24hr wait times for drying. Simply cut our patch to size & apply heat for a hot melt adhesion, to achieve a strong permanent repair that is ready to use straight away after cooling. Meaning less waiting time, so you can get back in the water sooner!
The Iron-on patch contains 3 layers for a strong, flexible & permanent repair, with a micro dot anti slip & abrasion lining for extra protection. Use the fabric to replace seams, protect from abrasion, reinforce shoulders, knees and other high movement areas as the ultra-flexible patch has stretch recovery enabling the best performance from your kit.
Use Coco Loco wetsuit repair kit to extend the life of your kit, maintain its performance, save £100’s of pounds & prevent more neoprene waste going to landfill.
Keep your kit in the game for longer.
- Wetsuit Repair Kit For Use On All Wetsuits, Drysuits, Swim Suit, Neoprene Kit, Yulex, Boots, Gloves
- 10x30cm, Easy Iron-On Repair Patch, No Glue Needed – Mend Small & Large Rips, Tears & Damage
- Permanent Repair In Seconds With Heat Weldable Hot Melt Super Adhesion
- Super Strong & Secure Flexible Repair – With No Waiting For Any Glue Drytime
- Non-Toxic & Safe Alternative To Traditional Toxic Neoprene Glues & Patches – Cause Skin Irritation
- Add Years Of Life To Your Wetsuit By Repairing, Reinforce And Prevent Areas Of Wetsuit
- Abrasion Resistant Micro Dot Lining For Anti-Slip, Waterproof, Windproof & Strengthening Properties
- Reinforce & Protect Areas That Are Stretched, Wearing Out, Or Have High Abrasion With Surfaces
| Dimensions: | 12 x 9 x 1 cm; 20 Grams |
| Brand: | Coco Loco |
| Batteries Included: | No |
| Manufacture: | Coco Loco |
| Dimensions: | 12 x 9 x 1 cm; 20 Grams |
Having tried the glue and patch version of repair kit I wanted something simpler, this is fantastic, cut to the size to suit your needs, 10 secs under hot iron (with pillowcase or something between for protection), check, the repeat if necessary then 10 secs moving iron in circular motion. Has stuck down firmly. Be careful not to get iron near any other part of the wetsuit. Have used it to repair split around bottom area, put some on inside and outside for extra protection and it went on well. Also cut into smaller bits to cover small holes and reinforce shoulders which were wearing thin. Very impressed with how easy it was to use.