Stormsure PVC and Vinyl Bounce House and Inflatables Repair

NEW PVC and Vinyl Repair Kit

Directions

1. Exhaust the inflatable product fully, clean the air leakage area completely and remove all dirt.

2. Take out the repair patch, the patch should be a few centimetres larger than the broken area. Round the edges of the patch because corners are more likely to catch and peel.

3. Apply the repair glue on the air leakage area and bottom of the repair piece evenly.

4. Stick the repair patch with the glue side to the damaged area, press with a blunt tool vigorously. Keep an even pressure over the patch while the glue cures. A flat object with a weight pressing down would be ideal.

5. Apply a little glue around the edges of repair patch after 12 hours (not always necessary).

6. The repair is complete after 24 hours. The damaged product is revitalised!

Contents

3 tubes of specialist heavy duty PVC Adhesive

3 commercial grade vinyl patches 130mm x 80mm in size.

You’ll have your item fixed in no time at all!

For use on:

• Ribs
• Kayaks
• Canoes
• Bounce Houses
• Waterslides
• Inflatable Spas and Hot Tubs
• Air beds
• and many more…..