Hikig 2 Pack Hotas Desk Mount for The Flight Sim Game
Hikig 2 Pack Hotas Desk Mount for The Flight Sim Game Joystick & Throttle Compatible With Thrustmaster Hotas Warthog, Thrustmaster MFD & Winwing Orion 2 With All Installation Bolts ＆ Install Manual
Hikig 2 Pack Hotas Desk Mount for The Flight Sim Game Joystick & Throttle Compatible With Thrustmaster Hotas Warthog & Thrustmaster MFD
| Dimensions: | 34.1 x 13.9 x 9 cm; 4.88 Kilograms |
| Dimensions: | 34.1 x 13.9 x 9 cm; 4.88 Kilograms |
| Origin: | China |
que un producto de marca desconocida, a menos de la mitad del original, funcione tan bien.
Material resistente, tornillera tambin, y los sargentos que agarran de partirn una mesa de la de ik*a si aprietas demasiado.
Permiten cierta modularidad y yo que los compr para hotas/colectivo de otra marca (no TM) perfecto con un mnimo ajuste.
Muy recomendables.
Was looking at more expensive brands but decided to try this as it had good reviews and was cheaper. Have to say it is excellent. Easy enough to build but just take your time and ensure you look at the instructions closely for type of screw/bolt used etc. All in all for the money it is excellent and I would highly recommend. Makes using HOTAS a far easier and enjoyable experience rather than it sitting on a desk.
j’ai longtemps hsit avant de l’acheter pour y viss mon warthog throttle et stick car sur la plaque sur laquelle vous visser le stick il n y a pas de choix pour l orienter a droite ou a gauche juste 4 trous pour le visser mais ca n ‘est pas du gnant au contraire c’est trs solide ca se rgle impeccablement bien sa ce clipse sur le bureau trs bien et ca bouge plus du tout allez y les yeux ferms je le recommande et merci Amazon toujours aussi rapide
Pros
-feels solid, everything that matters is metal
-plenty of adjustment points
Cons:
-difficult to setup
-no cable management (there are work around by wrapping it around the mount but it’s a messy way to go about it)
-hard to adjust
-needs a lot of overhang for clamp (can use without the quick release clamp)
-pricy
A hotas mount is a set it and forget it thing so once it’s setup, so while it was a pain to setup using it was pretty painless. The only complaint is you need a fair bit of overhang to use it properly, and since my table has a drawer on the bottom, it doesn’t have enough overhang for the clamp. I ended up just installing it without the quick release clamp, and it still worked just fine. Playing in VR I can completely forget about the mount which is a sign that it does work. I know exactly where my controls are and it does not shift out of the way during use. Main complaint is that it cost 100 bucks. In isolation that price is not terrible, but what makes it terrible is the fact there are other mounts like this, pretty much identical to this one that sells for 20 dollars less. If that listing gets removed then this would be fine, but if both are up, theres no reason to pay 20 dollars more for the same product. 4 stars for the product, 2 stars for the value.
This is only Compatible with the Thrustmaster Hotas Warthog and Thrustmaster MFD.
It is very sturdy — the throttle and joystick together weigh nearly 5 kg. Just make sure your desk is thick enough to take the weight.
It is superbly sturdy and appears very well-made.
I have been looking for something like this for a while, but I made a slight mistake when I ordered these – I didn’t read the description properly and did not realise until I unpacked it all that it only had the fixings for the Thrustmaster Warthog included. I have an X52 pro.
Not to be deterred, I found that the throttle side had adjustable bar-brackets which could be lined up with the screw holes of my X52 stick – I just needed a couple of longer M4 screws, which I fortunately already had. It worked out nicely. For the X52 throttle I found that the mounting plate for the Warthog stick fits under it just right – I applied a strip of 50mm heavy duty Velcro to the throttle and plate (after fitting the plate mounting screws) and they fit together very securely. I waited a day for the adhesive of the Velcro to cure before I tested it out on the mount – it’s rock solid. I can apply quite a lot of force and it won’t budge a bit. Great.
The mounts themselves need to be assembled before use. There’s a tool included for tightening the screws, and the instructions a clear and easy to follow. The clamping mechanism is super easy to adjust, and once set correctly the mount is fantastically stable. The screw that adjusts the clamp doesn’t have a locking nut for some reason. It could really do with one to prevent small inadvertent adjustments when stowing it away. The quick release lever lock is brilliant.
I’m really happy with these mounts, but I would be a bit hesitant to use them on thinner desks as they are very heavy – each one ways about 5 pounds. My desk is about an inch thick so I have no worries, but it is something to think about.
The price seems reasonable, but I feel the inclusion of a second set of bar brackets would have been good – it is however sold as only Warthog compatible so I can’t complain. It’s a fine product.
Trs bon materiels qui est simple monter.
Parrait robuste et bien compatible avec le joystique A10 Warthog trustmaster.
Simple remarque, il y a un trs lg jeu entre la platine et le joystique.
I’ve been after a desk mount for my Hotas Warthog joystick and my home made A320 throttle block for a while. This one ticked the boxes in all areas: components, materials, price.
It seems to be a heavy duty set, good quality materials, very easy to assemble, with everything you need – screws, plates, etc. And it just ‘sticks’ to my desk, which is awesome because I was getting sick of my joystick sliding sideways all the time.
Its universal mounting system for different boxes is awesome, allows me to mount my A320 throttle quadrant with a little 3D printed adaptor. I also like the top screw threads. I’ll design/3d print a mount for my iPad mini to use as the aircraft’s electronic flight bag on one the joystick mount and the auto-pilot box on the throttle quadrant side 🙂
There’s only one small thing that threw me off a little: not enough of the long flat head screws so I have to improvise.
These are super high quality and very heavy. Definitely made of steel and will last forever.
Material is, for what I see on the mounting phase (YES, it comes unmounted and you have to mount it on your own, but it has very easy instruction set.
Presses firmly on the table and my warthog HOTAS doesn’t move a bit. far better than the homemade I had.
BUT. it is missing 8 screws, I don’t know if it only my unit or it is a common issue. In my case, Im missing 8 of the long flat head bolts. And I have 4 short ones exra. Lucky for me, I had them in my box of spares from other projects.
If there wasn’t the problem with the bolts, it would be a 5 out of 5
/
El material es, por lo que veo en la fase de montaje (S, viene desmontado y lo tienes que montar t mismo, pero tiene un instructivo muy fcil.
Presiona firmemente sobre la mesa y mi Warthog HOTAS no se mueve ni un pelo. Mucho mejor que el que me fabriqu yo mismo.
PERO. le faltan 8 tornillos, no se si es slo mi unidad o es un problema comn. En mi caso, me faltan 8 de los tornillos largos de cabeza plana. Y tengo 4 cortos extra. Por suerte para m, los tena en mi caja de repuestos de otros proyectos.
Si no fuera por el problema de los tornillos sera un 5 sobre 5
Molto solido, metallo pesante, ben fatto il gancio/sgancio rapido con leva. Si adatta alla gran parte di joystick/throttle. Regolabili in vario modo le altezze e adattabile a vari spessori di scrivania. Peccato il prezzo, piuttosto caro. Ma si sa, la qualit si paga