Stud Finder Wall Scanner, DEWINNER Wall Detector, Non
Stud Finder Wall Scanner, DEWINNER Wall Detector, Non Contact Voltage Cable Tester for AC Wire Metal Inside Wood, Center Beam Finding,Joist Detection with LCD Display…
Step 1:Calibrate the Tool Before Every Scan
After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed. In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the Wall
Move the stud finder along the wall slowly. Note that if shake or lift the scanner accidentally, the device needs to be re-calibrated. The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.
Step 3: Find the Location of the Stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
| Weight: | 260 g |
| Dimensions: | 19 x 8.5 x 5.2 cm; 260 Grams |
| Model: | DE-SH201 |
| Part: | DE-SH201 |
| Batteries Required: | Yes |
| Batteries Included: | Alkaline |
| Manufacture: | DEWINNER |
| Dimensions: | 19 x 8.5 x 5.2 cm; 260 Grams |
Achet pour une recherche du passage d’une gaine lectrique (220 volts) sous un pavement de klinkers,
Appareil maintenu 15 cm du sol, il dtecte localise la gaine et son orientation (avec mthode de triangulation)
La gaine tait 12 cm sous les klickers soit environ 18cm du niveau sol.
A recommander,…
This is a fantastic stud finder and I have used it to be able to put up shelving in my property which except for the main 4 outer walls is all plasterboard walls. It even works for the love wire finder and metaldetector. I would definitely recommend this product.
I was tasked with putting up a “floating” shelf. In the kitchen. The biggest problem being. It was over a series of electric sockets, at one end. The metal bracket for the shelf, was going to be quite close to where I presumed the wires would be running in the wall. Using this device, I was able to determine that the screws for the bracket, would be a good 4″ away from any hidden electric cables. It certainly took away the uncertainty of drilling into the wall. The digital readout is so easy to see, and makes it an absolute doddle to use.