100W LED Tripod Work Light, Site Light with 1.5m Telescopic
100W LED Tripod Work Light, Site Light with 1.5m Telescopic Tripod Stand, 8000 Lumen, 220V-240V, IP65 with 5m Cord, Switch for Workshop, Garage, Baseme
2 x 50 watt led lights & 8000 lumen
Enough lightness to illuminate your garage, warehouse and basement etc.
Tripod Ø4mm & strong metal fittings / telescopic parts
Some of tripod’s telescopic parts on the market are generally plastic material, ours are metal material. It means that this light has a stable structure and will not sway even at the highest height.
Easy & Fast installation
The two lights are pre-installed on crossbar when you received package. Just fix tripod then install the crossbar on the tripod.
TECHNICAL DESCRIPTION
| LED | 2x50W |
| Mains voltage | 220- 240V; 50Hz |
| Material | Aluminum |
| Light color | 6400K |
| Scope | 25m |
| Protection class | IP65 |
| Electric wire | 5m |
| Lumen | 2x4000Im |
 |  |  |  | |
|---|---|---|---|---|
| Lumen | 0-3000lm | 8000lm | 4000lm | 8000lm |
| Watt | 80 | 100 | 50 | 100 |
| Power Supply | Rechargeable | Main Power | Main Power | Main Power |
| Batteries | 18650 Lithium Batteries | |||
| Work Time | 1.5-9 hours | |||
| Special performance | Adjustable 5 light levels | Socket & USB output in back | Socket & USB output in back | |
| Scope | 98-150cm | 98-150cm | ||
| length of wire | 5 M | 5 M | 5 M |
| Weight: | 4.65 kg |
| Dimensions: | 67.2 x 25.8 x 15 cm; 4.65 Kilograms |
| Brand: | kalwason |
| Model: | S1104-S2-50W |
| Part: | S1104-S2-50W |
| Colour: | Yellow-1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | kalwason |
| Dimensions: | 67.2 x 25.8 x 15 cm; 4.65 Kilograms |
| Origin: | China |
This is a great light for working iin dark areas, it runs on mains 240v and has a 5 meter long power cable, each light can be individually manoeuvred and switched on/off using the switch on the bottom of each light.
The stands legs fold out for give a large base to keep the light stable and two sections can be extended by turning the black sections to loosen and tighten the telescopic pole.
Loads of light is given off by this site light and its more than enough to fill a room where you are working.
Its great, my new favourite work ligh
This review is for the 100W LED Tripod Work Light, Site Light with 1.5m Telescopic Tripod Stand, 8000 Lumen, 220V-240V, IP65 with 5m Cord, Switch for Workshop, Garage, Basement.
This is a great quality and really well made work light. It came in a massive box and took about 5 mins to get setup. Once up it is sturdy and provides a good amount of light and is bright. The stand is good and the whole item folds away to something relatively small when your done. Would defo recommend for any worker that needs lighting. Also has a very long cord which is alway handy!
As you would expect from an LED work light, this offers amazing brightness and longevity compared to halogen. The design using many small LEDs rather than one large COB LED means less depth for cooling and a slightly better spread of light, though it’s still more directional with strong shadows compared with halogen.
Also like many white LED lights these don’t seem to give a full spectrum of light, so some colours seem off. This would make them unsuitable for paint matching and decorating, and can also make wiring and electrical work challenging on complex looms.
The stand is light and robust, the cable is chunky with a guide for the Y-piece to support it on the crossbeam, and the lights only need one plug but are individually switched – this does mean you can’t use them widely spaced as individual lights.
Overall, fair value and very good for confined spaces due to the flat LED design and light weight, but the lack of full spectrum light limits their usefulness for DIY purposes. They are, however, flat enough to slide under a car for inspection which is a genuinely handy extra ability.
This arrived in a couple of separate pieces but was simply to put together with no need for tools. The lights are BRIGHT, giving a much brighter and even light than my old halogen work-light. Even with only one panel lit (they have separate switched for each panel – middle photo) it’s pretty bright, and with both (right-hand photo) there is a full spread of light to help in even the darkest of jobs. Each panel can tilt and rotate separately, so you should have no problem getting the light exactly where you need it. I guess the only slight gripe is that the pole doesn’t really extend over head height, but I can’t see that being an issue for what I’ll be using them for.
A good strong work light indispensable when getting good paintwork finishes.