Corsair CO-9050074-WW LL140 RGB Dual Light Loop RGB
Corsair CO-9050074-WW LL140 RGB Dual Light Loop RGB LED PWM Fan 2 Fan Pack with Lighting Node PRO, 140 mm , Black (RGB)
System Requirements
- Motherboard with an open standard 4-pin fan connector
Contents and Specifications
Package contents:
- x2 LL140 RGB 140mm Dual Light Loop RGB LED PWM Fans
- x1 RGB Lighting Hub
- x1 CORSAIR Lighting Node PRO
- x2 Mounting Strips for Lighting Node PRO
- x8 Fan Mounting Screws
| Weight: | 499 g |
| Dimensions: | 14 x 14 x 2.49 cm; 498.95 Grams |
| Brand: | Corsair |
| Model: | CO-9050074-WW |
| Colour: | Black (RGB) |
| Batteries Included: | No |
| Manufacture: | CORSAIR HOLDINGS HONG KONG LTD |
| Dimensions: | 14 x 14 x 2.49 cm; 498.95 Grams |
Easy to install use, then again corsair accessories are exceptional haven’t tried mouses/headsets but commander pro & those fans, top notch.
Buen equipo, lo compre en descuento de caja abierta,
No traa los tornillos pero eso no afecta el funcin del equipo por ende 5 estrellas
SI COMORAS CAJA ABIERTA PROBABLEMENTE LE FALTEN TORNILLOS.
If your case can support 140mm fans, these produce quite strong airflow and do not get obnoxiously loud. I recommend sticking with all one brand/software for RGB and fan control but so far iCue has had no issues for me other than maybe using up a little bit of CPU. I have these paired up with a 120mm in the rear of my case and they look great together. Easy to install and the wiring is easily managed.
I set mine alternating between red and blue for best results.
Excellent quality fans, easy to control rgb with the help of icue, might be best to make sure all rgb components in your case are corsair or icue compatible as this gives the best in game effect also helps to set a common color theme for the whole setup. additionally as these fans come with an extra node, you can also attach a pair of CORSAIR ICUE LS100 extensions as these extensions are cheap especially in warehouse deals.
Works very wells lovely RGB display feature down side is you have to use the icue software and are not compatible with most RGB headers accept when used with the icue node has great fan speeds and amazing product overall, i will not use any other fa
hey look amazing, little bit of noise but if you wanted no noise go for noctua fans. its not noticable when using a hyperx cloud alpha or any headphones with noise cancellatio
These fans are really good and very simple to install, there are quite a few cables. After installing the fans the corsair i-cue software is easy to install and use. They also look very nice with many different colour schemes. Overall brilliant fans.
Colourful fans that can be controlled by iCue software, lots of different colour/flashing settings
I’ve been wanting to add some flair to my build for a while, after realising my motherboard didn’t support ARGB( z390) I started looking for RGB fans that could use a controller to bypass the need for an ARGB header.
I came across this pack of 3 that came bundled with a controller and hub, incredibly easy to install just make sure you have a couple spare Sata cables as it requires 2, the controller and hub come with sticky back tabs for easy installation, download iCue and you’re ready for rgb, I’ll be grabbing a few more at some point, now I have the fan hub I can buy singles as it has space for 6 fans total with an expansion slot to add up to 12.
hese fans are perfect for people who want to make a custom lighting setup throughout their room
they are low noise
they do look hard to install by the rats nest of wires but you arent really given the oppertunity to get them wrong
It’s good fans. They give good airflow and have a low noise level. Excellent RGB customization, and the RGB looks good. It was just tough to install each fan and to hide the wires. If you can do that quickly or have the time to then, this is a great product. 9/10
These fans look amazing, I have 8 in my current case, and it makes my build look stunning – they are relatively quiet, but can be a bit loud at 80%+ power, however that is expected. They are also quite pricey but would highly recommend if you have the avaliable budget!
PROS:
– very easy to install
– really nice ICUE sync and look
– definitely nicer than most corsair fans as it comes with rgb light inside the middle and outside.
– great control on ICUE for fan control
CONS:
– the noise is a little loud
– expensive for what you get
– if you don’t have the same fans all around all fans don’t look as synced.
Overall, I can’t complain much about the item. It definitely does what you want. It does look very good when synced up to everything else. A little loud for my liking but I used them under my gpu and above my psu. Definitely better than other corsair fans. 9/10
Pros:
Easy to install
Looks Great
Quiet (Even Under Load)
Good Software
Cons:
Price (Corsair Premium)
I bought these as I initial bought the wrong fans for my first build. These fans are now installed and have really brought my PC to life. I like the defused light effect that you get, as LED’s are not just glaring at your eyes.
I ended up buying 3x Single 120mm fans as I already had the Commander Pro that came with my AIO.
I do not think they are very loud, but I do not have any reference as this is my first build. I have all fans on Extreme and with my headset on, I can barely hear anything from the fans.
Bought these when I changed to a nicer case (Lian Li O11). Very bright and colourful with loads of different presets, as well as functionality for custom lighting modes via iCUE.
One thing to note; they are not as good on a radiator as something like an ML120, also made by Corsair. The LL120’s are not a static pressure fan, so they perform worse when paired with a rad.
The fan is great love it it was easy enough to install and hooked it up with the light sinc so now it matches the three fans at the front I was going to give 5 stars but the screws they provide with the fan are far to big and got stuck and wouldn’t tighting so I had to end up using my old fans screws witch is fine but again I was hoping to be able to use the new screws with the new fa
Very Happy with this fan it does what it says on the tin. The rgb looks great and alongside the my other Corsair fans in the case it all looks brilliant.
Super easy to install I just plugged it into the rgb and fan controller and it was all working fine with icue, the fact that these come with the rubber edges already stuck on is great because I seem to forget to add them.
The software can be a pain sometimes but general it works well enough.
I have noticed these are a little louder than my previous cheaper fans however I then get lower temps, the only downfall of this product is the price however the quality is very good and should last a while. I would recommend
An incredibly great product. So quiet and very attractive. Would highly recommend. Definitely worth the price.
I’m wasn’t sure why I needed RGB LEDs, but now that I have them, I like ’em.
For reasons I can’t really explain, every manufacturer seems to feel that they need their own proprietary lighting systems when the infinitely more complex thing that is PCIe graphics cards is completely standardized.
I don’t like that, but I have to give Corsair credit for having one of the best control applications since it doesn’t just control the lights, but also has a great temperature and usage readout for all of your components.
I recently purchased the Crystal series 680x to house my first ever rig build, it came with 3 x ll120 fans in the front and a non RGB exhaust fan. I switched that out with an LL140 and ran 2 x LL140s on the bottom of my case.
These fans are awesome! There is a flex mounting where you use the fan fixing screw to bend and take up the tension if you over tighten any individual corner (and perhaps to offer dampening, although I’m not sure from what).
If the LL140s came in white I’d be all over i
Good fans, but the rubber shock absorbers are designed not good, if you have some technology dents on your case, they can go in that dents and fan’s plastit body will contact to the case metal.
Firstly, Its corsair so you know its going to be more expensive than it should be, it does look nice in a system however to use the RGB function you need to buy 2 more products from corsair raising the bill even more. not only that the RGB is ONLY on the intake side of the fan. meaning if you want to actually look at the RGB ring without the backplate getting in the way then you can only use these fans as an exhaust.
Installation was quite annoying aswell, they include anti vibration rubber pads that on mine were slightly off centre of the screw hole meaning i had to use quite abit of force to properly screw them on.
Not sure weather to give it one or 5 stars, i ordered 1 ll140 fan and got a ML140 rgb pro, so i didnt get what i bought but i got a better fan so cool? Either way they are both amazing fans but i didnt get what i payed for, so this good for me however someone might end up worse off so be warey
Controlling the LED lighting sequence is very easy via the Corsair i-Cue software (not supplied with the fans, but can be downloaded for free via Corsair’s website).
During “normal” working, these fans are super silent and as the CPU gets hotter, they speedup increasing the noise level – however, even then, they are nowhere near the noise level of the fans they replaced.
Extremely pleased with the performance of the fans and would recommend them in a heart beat.
Very quiet and beautiful colours to give a bit of flair to my build. The only con is I had to buy wire splitters to plug them all in, which for the price I was hoping they would have included.
Pros:
– Easy to install (I had a fan bracket I could mount them to to make it easier to install)
– Vibrant colours
– Compatable with iCUE
– Long cables for out of reach RGB Hub / Light Node
– 4 screws included
Cons:
– They’re a bit expensive
Overall I’m very satisfied with my purchase of 2 of these fans.
After buying a new (Corsair) computer case that came with 3 lovely RGB fans it also came with a fourth non-RGB fan fitted at the back that I had to replace, after all it’s all about the RGB nowadays!
The Corsair LL140 RGB fan comes well packaged and in the box you’ll find the fan itself, a bag with 4 screws to attach it to your case and the attached RGB & PWM cables neatly packed inside its own little cardboard section.
Fitting the fan was a tad more awkward than it needed to be, I have no idea why manufacturers have decided to use such chunky screws to attach fans (and I’d imagine other accessories) to cases they are quite difficult to thread right and take some good old fashioned elbow grease to screw in tight, but not TOO tight as there are rubber anti-vibration pads on the fan to help with vibration noise and if you tighten the fans too much you’ll end up squashing the rubber areas on the fan!
After plugging the fan into the Lighting Node Pro (NOT included with the single pack!) and attaching the other end to a PWM fan hub which also controlls my case fans this was up and running in no time! The fan is quiet and operates perfectly well when attached to a PWM fan hub (in my case the and when plugged into a case fan header on a motherboard.
Pros
RGB looks AWESOME, specially when used with the intended Lighting Node Pro!
Operates quietly when at low-moderate fan speeds, does get a little louder at higher fan speeds (but what fan doesn’t?!).
Pulls a decent amount of air (using mine as an exhaust fan).
Feels like a quality product that will last.
Cons
Installation can be a little tricky, the chunky screws used are easily cross-threaded and take some eblow grease to properly tighten.
At the time of purchasing the single fan pack cost me 23 which has since gone up to 28 which is a little steep for a case fan but it is good quality, depends on your budget.
I deducted one star from “value for money” because it’s quite expensive for a single fan, but as I already have a Corsair 500d case with 3 of theses fans, I wanted to match this one, which is used as exhaust on the rear of the case, with the 3 front intake fans.
One star deducted from “easy to install” because the screw holes didn’t have groves on them, so it was difficult to drive the screw through the holes the first time. Perhaps it is intentional for some reason, but it did make it a bit difficult to screw on.
All in all very happy with this fan. Adding it as an exhaust on the rear of the case has reduced the GPU temp by up to 5 degree celsius with 3x120mm intake fan on the front and 2x240mm exhaust fans on the top (cooling CPU aio radiator)
They look good, were easy to install and are fairly quiet. I bought a 3 pack and a single but ended up not being able to fit the single without removing my hdd tray and I decided against it. My only real complaint was the 3 pack had 1 slightly noisier fan (a light rattle noise) that I could have lived with, but since I had the spare I swapped it. If I was less OCD, or there was no rattle, I would saved money by returning the spare.
If you’re going to set these up to be intake, then I suggest going with the QL as the LEDs on the back side are very distracting to the overall look.
Quite loud but works very well. I have a 140 on the back and one on the top as outtake fans with 3 120’s on the front as intake. Keeping my Ryzen 7 3700X at about 62-68C under load.
Very happy with those white fans! They look fab, love the black accenting on the pads and screws. Relatively quiet, although beginning to sound like a jet engine at full speed. They are very fast! I have 5 of those in total in my case and rarely have to go above 50% max rpm. Easily recognisable in iCUE (amazing software) and easy to set up. RGB customisation options and the individually addressable LEDs are out of this world, so many possibilities!
Colours are nice, although I wish they were a bit more saturated. The light from the LEDs is not evenly dispersed, so I can see slightly brighter and dimmer areas around the fan.
I bought a pack of 3 and all also a single fan to add to replace my current case fans. At first I didn’t really understand the whole set up process (plugging each fan into and fan header and also the rgb hub with then plugs into the lighting node pro). However, as i started installing the fans i began to understand the process. One other issue i find with the fans is cable management, as by the end of the installation I was left with a swamp of cables. With that said the fans do look BRILLIANT and they are quiet too. Yes, they are a bit overpriced but you won’t find any better looking fans.
Shows great colours and quiet but was a pain for me to install
Using those now over 1 yr in my epic build and like those very much .
Very bright and colourful fans the iCUE software has so many amazing looking programs the RGB hub that comes with this has space for 6 RGB fans number 1 to 6 in order of which way your want your fans to use the effects and the other part supports 2 Corsair RGB devices so you can use this and another RGB hub for an addition 6 fans or LED strips depending what you have as an RGB Hub
Requires a USB connector on your motherboard to work and 2 Sata power connectors on your power supply
Comes with double sided adhesive so you can stick your RGB hub and RGB controller somewhere on your case to make cable management easier
Does not come with support to plug the actual 4pin fan headers into so you will need a separate fan controller like the commander pro
These fans are great aesthetically, but for what they are, they are VERY expensive. I am sure you could get much better fans at this price, but you could not get RGB like these. They get my recommendation for those who choose form over function, but for no one else. In addition, the installation process is a bit of a pain, having to deal with two cables for each fan. One to the fan header and one to the RGB Hub, which requires a SATA power cable and another cable to connect to the lighting node pro, and then the lighting node pro connects to the motherboard via USB 2.0 to your motherboard. iCue is also a great software experience.
TL;DR: They look great, but aren’t great value are a pain to install. Do I regret my purchase though? No. Not at All. In fact, I love these fans and would probably buy more.
One of the best looking rgb fans, a bit expensive for srp but i bought it on sale so can’t complain.
A quick rundown of what i loved and any difficulties these overall great fans provided:
Pros: 1.Exceptional cooling, case is 10C cooler with these added.
2. RGB lighting looks fantastic
3. Fits easily in even my relatively small case without hitting the RAM or cpu power cable.
(Minor) Cons: 1. The 2 nodes took a little it of figuring out, but were simple once all the parts fell together.
2. Not advertised as needing 3/4 pin fan headers when you definitely need them to power the fans, as well as a Usb 2.0 header
3. You need to use a SATA power connector to power the 2 nodes, also unmentioned in guide.
4. Fans can be tricky to screw in due to very tight plastic hole that isn’t threaded. Just takes a bit of a push.
Overall: Really great performance, they add colour and cooling at a reasonable price for the aesthetic. 10/10 will be buying again when i upgrade my case.
So the fans themselves are amazing. They work flawlessly, They are super quiet and the rgb is stunning. What I really don’t like is how they sell these. So you have to buy the Pack of 3 to actually get the RGB hub and the Lighting Pro or whatever, but what they don’t tell you and what I didn’t even find from pre-researching is that each fan has its own individual fan connector for the motherboard to actually spin. And I’m guessing for many people like me they don’t have 6 4-pin fan connectors on their motherboard so you need to buy splitters and stuff. The thing is, even with many splitters you need to be careful not to overload them and you can’t control the fan speeds so corsair is gracious enough to provide a solution to all of this! …. For 50 Extra… So buy these if you know you will be able to facilitate them on your motherboard or if you are prepared to pay an additional 50 for the “Commander Pro” (I just call it a crappy piece of plastic but whatever) otherwise stay away
Because the front of my case is closed off I used the the vanilla case fans to cool the radiator. 1 LL for top and rear of the case. I did not need a controller as these fans plugged into the rgb headers on the aio. I strongly recommend you do the same if your planning a new build with a side window only.
Software can be a pain but is all done now.
Fans look brilliant, extremely bright and no to loud. Around half hour to install including a bit of cable management. Very impressed with the end result. 10/10
As expected from corsair. These are one of the best fans out there. Very high quality and very quiet.
These fans run pretty quiet and just look amazing! Attached are my fans installed onto my Fractal Design Meshify C case, two Corsair LL140 fans are installed in the front and one LL120 fan installed at the back.
Great looking fans no problem setting up and works seamlessly with my mouse and keyboard in icue
Very strong RGB effect, pictures don’t do this fan justice. The airflow isn’t as good as other 140mm fans, but it is a static pressure optimised fan and it does the job well anyway. They are also fairly quiet.
Quiet and definitely the prettiest RBG fan out there.
Commander pro is a must if you want speeds control!