Corsair iCUE H115i ELITE CAPELLIX Liquid CPU Cooler (33
Corsair iCUE H115i ELITE CAPELLIX Liquid CPU Cooler (33 Ultra-Bright CAPELLIX RGB LEDs, Two 140 mm ML RGB Series PWM Fans, 400 to 2,000 RPM, Zero RPM Mode, Corsair iCUE Commander CORE Included) Black
High-Performance RGB Pump Head
Each ELITE CAPELLIX cooler houses 33 ultra-bright individually addressable RGB LEDs. Add to that its powerful, low-noise cooling capabilities, and your build will look as cool as it runs.
Split-Flow Copper Cold Plate
An optimal cold plate design and a high-density stack of 128 micro-skived fins-per-inch provides highly efficient cooling at all loads.
Low-Noise Centrifugal Pump
Delivers a flow rate of up to 0.82L/min while generating less than 20 dBA, for extreme cooling with low noise.
Change Up Your Look
Each Elite Capellix CPU cooler comes with two separate pump caps; a glossy black one is pre-installed and a lighter, more transparent one to let the real power of those Capellix LEDs shine through.
Turn any Case into a Smart Case
Use the power of iCUE to control the fan speed and RGB lighting of the included fans. Expanded control capability means you can control up to a total of six fans.
*Additional fans sold separately.
Magnetic Levitation RGB Fans
Corsair ML RGB Series PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan.
Zero RPM Mode
Zero RPM cooling profiles in Corsair iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise.
Available in Three Sizes and Performance Levels
240mm (H100i) for great compatibility, 360mm (H150i) for high cooling performance, and 280mm (H115i) for a great mix of both.
Easy to Install
Modular, tool-free mounting bracket for quick and painless installation on all modern Intel and AMD sockets.
Powerful Corsair iCUE Software
Adjust fan and pump speeds, control and synchronise your cooler’s RGB lighting with all iCUE-compatible devices, and monitor CPU and coolant temperatures, all from a single intuitive interface.
RM750, 750 Watt 80 PLUS Gold Fully Modular PSU
Corsair RM Series fully modular power supplies deliver consistent 80 PLUS Gold efficient power to your PC, with virtually silent operation
Dominator Platinum RGB 32GB (4x8GB) DDR4 DRAM
With superior aluminum craftsmanship, tightly screened high-frequency memory chips and 12 ultra-bright, individually addressable CAPELLIX RGB LEDs.
ML120 PRO RGB 120mm 3 Fan Pack & Lighting Node PRO
Combines unrivaled performance and low noise operation, by utilising magnetic levitation bearing technology, with vibrant RGB lighting controlled by the included Lighting Node PRO.
| Weight: | 63.9 g |
| Dimensions: | 32.2 x 13.7 x 2.7 cm; 64 Grams |
| Brand: | Corsair |
| Model: | CW-9060047-WW |
| Colour: | Black |
| Batteries Included: | No |
| Manufacture: | CORSAIR HOLDINGS HONG KONG LTD |
| Dimensions: | 32.2 x 13.7 x 2.7 cm; 64 Grams |
Decided to switch to an AIO, (All In One), water cooler from an air cooler purely for aesthetic reasons. I had an Noctua NH-D15S which cooled my i7-12700K very well but it is large and makes accessing parts of the PC a little difficult, e.g. RAM and first SSD slot. They can be accessed without removing the cooler, but it is a little fiddly, but the AIO gives easy access. There are so many AIO’s on the market which makes it difficult to decide but decided on this one as I like Corsair products and they tend to have good reviews. I would have liked one in white, but only the model below this one, 100i, and the one above, 150i, come in white. I felt that the 100i would not be sufficient to cool my CPU effectively and the 150i is out of my price range. Fitting was quite straight forward but forget the provided manual as it’s next to useless. However, there are plenty of installation videos on YouTube which are much better. It doesn’t cool my CPU any better than the air cooler, but it certainly looks a lot better. Noise-wise, it’s a little worse as the pump runs at full speed all the time, but it’s not intrusive.
Unfortunately didn’t come with the AMD bracket it was meant to so I can’t Install it.
Update, got in touch with Corsair and they were happy enough to send out the bracke
As a first time PC builder it was fairly easy to install and runs really quietly. The included RGB hub works brilliantly with my other Corsair fans but most importantly it’s keeps my CPU running at extremely cool temps.
Simple and straightforward instructions for fitting and runs a lot quieter than my old h100.
Also the command pro thing that’s included is brilliant, a lot less wires and much better cable management. So far it’s not gone above 37’c (highest cpu temp from benchmarks has been 80’c but only for like a second) but I only game and the rare 3D mark bench. So idk. Anyway. It’s very good. Very simple and quie
Amazing cooler, upgraded from the 240 version as wasn’t getting adequate cooling. No seeing any temps above 60c when gaming on this cooler, does reach 89c when benchmarking but that’s to be expected with the 12900k CPU.
I bought this to work with my Corsair case which came with iCue RGB fans. It is incredibly quiet, including the pump. RGB is nice, especially on the actual pump.
The icue software was good and detected my fans before installing. After fitting the new aio cooler i cant control anything in the icue software.
Great temperatures on my cpu now and I don’t even have to use the fast mode in it so it’s great and the lights look nice!
This cooler was quite easy to set up, and the temps have been incredible, even under heavy load they don’t exceed 55 degrees c on my i5 12600k which is very impressive. The pump head looks amazing with the clear head and of course syncs perfectly with the iCUE software, would definitely recommend for new and experienced PC builders as it is the best for the price!
My Ryzen 9 5950x is very toasty and my air cooler struggled hard to cool it, idle temps were at 70 degrees Celsius. This AIO goes so well with it, idle temps are now at 30 degrees Celsius!!! With iCUE you can make the fans nearly silent which is a big bonus
Everything regarding the delivery of the product went completely fine and it arrived in good conditions.
I bought it for 126. It went a bit up (just 6 pounds) so it wasn’t that bad.
I own a i5-12600KF. I had to buy the LGA 1700 mounting from Corsair’s official page. I heard that depending of your motherboard you could still use the LGA 1200 accessories included just fine, but I didn’t want to risk anything. In addition, it came with thermal paste pre-applied which can save you some money.
The installation was easy. The commander core included came really handy since my chasis didn’t come with one from the start (you can plug up to 6 fans to control the speed and RGB, being this last one only applicable for Corsair fans).
I use my PC for illustration, studying and gaming. The temperatures on idle don’t surpass 30, sticking to 27-28. On load, they don’t tend to reach 40.
The fans will become noisy if you are playing more demanding games, you can’t expect miracles on that part. But they remain decently quiet otherwise.
So far this aio has kept my 12700k nice and cool and installation was reasonably easy in my case phantek p500.
Screwing in the radiator and fans was more annoying than anticipated but with time was a nice fit.
My main issue with this aio was having to get the standoffs for the 12700k,which when ordered took3 weeks to arrive from corsair store . The backplate was also difficult to fit onto the motherboard(fiddly screws).
Once the standoffs arrived getting the aio pump on and mounted was nice and easy.
So overall good product but beware getting the standoffs from corsair could take some time.
[Review is based on it being used in the Corsair 680X Case]
Genuinely a good cooler, got this on a deal for 100. Comes with the Commander Core which is a solid HUB for the fans RGB and PWM control unlike the Commander Pro which is strictly PWM control (its 2021, come on just put them together we’d pay the extra)
The fans run at 2000RPM max which is really good for RGB and 140MM. Colours and Brightness are really good also!
Mounting is straight forward, only negative is getting the hooks first time on the CPU mount without smudging the paste too much in some directions you didn’t plan on.
Only annoying issue I have with it, is the results regarding temps.
I was using a H150i RGB PRO XT 360mm which is outdated and not made anymore however, it got better results. Which is odd, because it goes in the front as the intake.
The difference is 5-8C however this absolutely does not ruin the build. But it is annoying as this goes at the top which is the best AIO placement especially in a huge case with good cable tidying.
(e.g.: H150i used to never peak 80, always max at 79.5C, now I peak 85 but it never stays there as it fluctuates between 60-85C during intense workload or higher tier gameplay e.g. Vanguard but always sticks around 74-79
I was hoping for it to get the same results from my old outdated H150i, if not lower in Celsius.
My recommendation is if your case supports it, go for the 360MM or more if you’re a huge fan of lower temps.
Bought the H115i and as always with prime it arrived the next day, the product came well boxed with everything you need apart from a screwdriver, the cooler was a breeze to fit and had no issues mounting it at the top of my Cooler Master HAF-X case, swapped the black pump head faceplate for the transparent one so the LED’s shine though a lot more, it looks great, the new CAPELLIX LED’s are really bright on both the pump head and fans.
Turned my system on, loaded up AMD Ryzen Master and it was great to see my idle temps down to 33c from 45c … Yes a 12c drop!!! Load temps where hugely decreased too, using the same stress test with CPU-Z the CPU didn’t even pass 57c … A decrease in load temps of 23c!!!
All in all delighted with the purchase, well boxed, easy to fit, looks great but most of all does an amazing job of keeping the CPU cool.