Corsair ML140 RGB ELITE 140mm Magnetic Levitation DUAL PACK
Corsair ML140 RGB ELITE 140mm Magnetic Levitation DUAL PACK, CO-9050115-WW
| Weight: | 197 g |
| Dimensions: | 14 x 14 x 2.5 cm; 197 Grams |
| Brand: | Corsair |
| Model: | CO-9050115-WW |
| Batteries Included: | No |
| Manufacture: | CORSAIR |
| Dimensions: | 14 x 14 x 2.5 cm; 197 Grams |
Idk why people hate these so much they’re like any other RGB fans. I bought these for ICue control & it work flawlessly. Love these & you’d be a fool not to buy these
Habe insgesamt 10 Stck im Rechner verbaut und bin absolut zufrieden.
Im Normalbetrieb (Broarbeit) hrt man sie im Grunde gar nicht, wenn ich 3D-Animationen rendere und der Rechner “schwitzt”, dann wird es allerdings durchaus laut und dreht man sie auf 100% sind sie nicht mehr zu berhren, aber das ist ja auch so gewollt, denn dann bringen sie auch eine entprechen Khlleistung.
Der Preis knnte etwas geringer sein, aber das knnte er ja eigentlich immer……..
Fazit: Kann ich nur empfehlen!
Easy to install, they look amazing and they’re quiet too. Would recommend these fans.
leds sit in the far back of the fan so at wide angles you can see the diode because the overall width is a little more then others in corsairs line up still as quiet as a noctua but doesn’t look like mammoth vomi
Very expensive fans but the move lots of air and are built to last longer than you.
Great airflow and decent RGB. Airflow is top notch and the RGB is blinding if using as intake but great if exhaus
Bought for my son, who seems very happy with these.
Not happy that they are so overpriced on Amazon. Tried to buy direct from the company as they were nearly 20 cheaper but apparently they were sold out for the whole time (nearly 2 months) I looked before Christmas. Yet the company apparently had plenty to sell through Amazon at an inflated price. If it hadn’t been the only thing my son wanted for Xmas I would have left it till after. I really hate being ripped off like that. Poor show.
I ordered a new fan not re new fan thanks Amazon, now does fan work yes it does but if I’m paying full price for new product then should get new
I never thought I’d spend so much on a fan but these are so quiet I need the LEDs to remind me that my PC is on!
Die Lfter an sich sind wirklich super. Lautstrke super keine unangenehmen Gerusche. Die Verarbeitung ist super und an sich fhlen sich die ml Elite auch besser an als andere Corsair Lfter. Die vibrationsdmpfer sitzen zudem deutlich besser und neigen nicht zur Wlbung wie zum Beispiel die der QL Lfter, wo sich an allen Lftern bei mir sich bereits diese Pads gelst haben und das innerhalb weniger Wochen.
Einziger Nachteil der Lfter. Hier gibts erheblich weniger Beleuchtung als bei vergleichbaren Produkten von Corsair und wenn man sich Corsair Produkte holt dann in der Regel auch der Beleuchtung wegen. Sie sehen definitiv sehr gut und Wertig aus, bieten halt nur nicht so viel individuelle Beleuchtung wie andere Lfter.
Works great and easy to install, I do recommend you buy some fan splitter cables because you may not have enough plug ins on your motherboard. Literally the only fans better than these are noctua, but they don’t do RGB so if you want your rig to be flashy, chilled, and quiet this is your only optio
These fans are definitely more pricey, but well worth it in my opinion. Almost silent at 850 rpm, which is more than enough to keep the whole case in fresh air.
Ottime ventole in generale, a partire dal motivo principale per le quali le ho scelte, la rumorosit molto bassa (si fa fatica a sentile sotto i 1200rpm).
La scocca che circonda la ventola molto minimale e ben fatta, nessuna vibrazione o altri problemi.
Effetti rgb gradevoli grazie ai 8 led presenti al centro.
Flusso d’aria notevole gi a 1000rpm con la possibilit di far volare il case se impostate a 2000rpm.
Unico difetto dato dal posizionamento non classico dei led, sono posizionati leggermente fuori il corpo centrale della ventola, e questo comporta che a certe angolazioni siano visibili i led senza che la ventola li copra, probabilmente il posizionamento stato vincolato dalla tipologia della ventola a levitazione magnetica, peccato sarebbero state perfette.
I was looking for some fans to pair with my iCue Commander. These worked perfectly. Easy to install to install and dead quiet.
Ciao ragazzi, ho comprato questo pack per il mio nuovo pc ma soprattutto per rendere omogeneo lo stile della macchina perch, avendo comprato come dissipatore l’H150i Elite con display, comprese nel dissipatore vi eran le ML120 per cui stata una scelta quasi obbligata!
A livello di installazione stato abbastanza facile, nella media diciamo, in quanto l’unica cosa difficile stata il collegare le ventole al posto giusto con il controller compreso nella scatola.
Piccolo trucchetto quello di posizionare il controller nel back del vostro case, passare i cavi dalla ventola frontale bassa a salire e collegarli rispettivamente nei numeri 1-2-3-4-5-6 in modo da avere le ventole tutte ordinate e perfettamente controllabili senza problemi con iCue.
Per quanto riguarda invece la ventola di espulsione posteriore, quella stata collegata al piccolo controller presente con le ventole.
Per cui se volete comprare queste ventole e collegarle tutte assieme, avendo un dissipatore come il mio, vi consiglio di acquistare un case corsair provvisto di controller rgb.
These are I think the best performance fans you can get also love the look of the back of these on my case. So far my pc is running cool as can be given I do have 14 fans installed. Push and pull on radiato
leichte Montage super Farben und man hrt einfach nix top
The ML Elites are similar to the other magnetic levitation fans from Corsair, but you get 8 LED’s now as opposed to 4 on the pro. Main reason to spend the money is they are a good RGB fan for a radiator due to the high static pressure. If you’re already using Corsairs RGB controller, these seem to be the best option.
I personally don’t think the RGB looks as good as on their cheaper SP 120 Elites, or the similarly priced LL/QL series. So I just used 2 of these on my top mounted 240mm radiator, and continued to use my SP 120s as the front facing case fans.
They’ve held up well for months now, the custom curve I set dissipates plenty of heat while staying relatively quiet. The LED’s are plenty bright and shine some extra light down in my case.
These are the best fans for airflow you can get from corsair.I replaced all 10 of my ll series fans with 10 of these ml fans the led don’t look as good as ll or ql but they make up for it in noise and airflow
Prodotto solido potente e funzionale.
Forse un po caro ma sono ampiamente soddisfatto
Swapped these in from the fans that came with the CPU cooler to have a more consistent appearance with the other fans. I think the swirl design of the fan supports look better than the cross fan supports found on nearly all other fans. The hub in the center looks better too.
In my picture, only MB side fans are ML120-Elite. The front are SP120-Elite, the top are ML120, and rear is a SP120.
The appearance is still not consistent with the other corsair fans I have, the swirl has 12 splines while SP120-Elite only has 8 splines and the center hub is different. Still better than it was.
These configure as an 8 LED in iCUE. Non-elite ML120 only have 4 lights so don’t pick the ML120 option in iCUE.
Also, so many cables to manage.
Well value for money is not there as other fans on the market do better for less and it does whine loudly when it spins up to its maximum speed. Once you make a custom cooling curve it works much better. ICUE makes this easy to so and barely uses system resources. I am a bit disappointed I can see the the individual LED’s when looking from the back of the fan when it is used as an inlet into the front of my case but otherwise the RGB is colourful, bright and responsive.
Overall if you are building around the Corsair ICUE ecosystem this is the one to get though.
The fans work well, silent and move a lot of air. Way over priced for what they are tho, unless you really want all that RGB and still have a fan that can move air. Hopefully they last a long time…
These ML series fans work great for pushing or pulling air through radiators,and just all around good fans.I have a fan curve set that Ramos them up while gaming,and they are not all that loud.They can be a bit on the bright side so I turn them down as far as I can which does the trick..So far these have worked great,and dropped my temps around 8 degrees while gaming..
These fans have been fantastic. The noise levels are low even under heavy loads, and I was able to drop temps on my CPU by a few degrees by swapping in two of these fans on my 240mm AIO cooler. The RGB looks nice and the stickers on the hubs keep a clean look. My only real complaint is that they were pretty expensive at the time I purchased them.
Used this fan as a replacement 140mm case fan and just plugged it into the command core hub along with the CORSAIR ML120 RGB Elite fans on the cooler’s radiator . Works great. Recommend it highly.
As you would expect, powerful and looks great. So glad Corsair paired this powerful package with a generous number of LEDs. Upgrading 3 of the stock fans on my Corsair case Allowed me to get my case to positive pressure after a prior addition one of the 140mm mag lev fans as the exhaust.
I did my research before buying fans and am super happy with these fans. ML (Magnetic Levitation) fans are not cheap but they should last for no joke 10+ YEARS and are near totally silent. They also blow, in a VERY good way. I can feel the airflow from about 2-3 feet away from the back of my case! They have built-in rubber vibration mounts as well. They also have a 0 RPM mode for that added silence. The ONLY thing that does not feel premium and quality about these fans is the small glob of what looks like hot glue that holds the cable into the fan body.
ML or bust for me after having these. The only other competition is Noctua.
I did my research before buying fans and am super happy with these fans. ML (Magnetic Levitation) fans are not cheap but they should last for no joke 10+ YEARS and are near totally silent. They also blow, in a VERY good way. I can feel the airflow from about 2-3 feet away from the back of my case! They have built-in rubber vibration mounts as well. They also have a 0 RPM mode for that added silence. The ONLY thing that does not feel premium and quality about these fans is the small glob of what looks like hot glue that holds the cable into the fan body.
ML or bust for me after having these. The only other competition is Noctua.
I have six of these fans in my case. They keep my pc nice and cool and they are super quiet. If they didn’t have the rgb I wouldn’t be able to tell my if my pc is on or not.
Je publie se petit commentaire concernant le produit .
Trs bon produit bonne ventilation pas trop de bruit .
Mes je trouve lgrement un peut cher mes sinons rien a dire comme toujours chez corsai
Corsair has made some ultra quiet fans here. Easy to install with all the necessary components to drive the fans and LED display (recommend to download iCue software to control colors and fan speeds). Purchased these fans to replace stock case fans and the difference in noise is quite noticeable. Under normal operation, the fans are extremely quiet. Under intensive CPU/GPU load, you will begin to notice these fans as they reach the higher RPM’s, however, they are still quieter than other fans that I have had before (and as mentioned earlier, the stock case fans from Corsair).
Cable management nightmare. The hubs are a joke to cable manage. rgb is pretty but back of case is a nightmare if you have more than 6 fans
Great fans, I have them all programmed on a custom fan curve using iCUE, I can hardly hear them. Definitely recommend.
It is quiet during normal use but can get loud if you run it at its max 2,000rpm, can also stop for passive mode.
Some notes:
It must be used only in a 4-pin PWM header so it has a constant 12V so it can *levitate* properly.
Also must be used with other corsair products, this is more of an expansion item to work with the 3-pack of fans that includes a Lighting Node Core that these plug into, you cannot plug this into your motherboards ARGB Header directly