MSI MPG GUNGNIR 110R Mid-Tower PC Case – Tempered Glass
MSI MPG GUNGNIR 110R Mid-Tower PC Case – Tempered Glass, ATX, M-ATX & Mini-ITX Capacity, 4 x 120mm ARGB fans with Hub Controller, Magnetic Dust Filter, USB 3.2 Gen 2×2 Type-C, Gen 1 Type-A Ports
MYSTIC LIGHT SYNC
The MPG GUNGNIR 110 Series’ ARGB lighting effects can be conveniently controlled via Mystic Light.
Simply connect the hub control board to a 3-Pin/5V ARGB motherboard connector.
HD MOUNTING BAYS
The MPG GUNGNIR 110 Series PC cases contain space for internal storage devices such as HDDs and SSDs in both the 3.5″ and 2.5″ form factor:
- 2 x 2.5″ driver bays
- 2 x 3.5″ driver bays with 2.5″ combo tray
MAGNETIC DUST FILTER
A magnetic dust filter prevents dust from falling inside, and can be easily removed for cleaning.
The front panel also includes a non-magnetic dust filter.
TOP I/O INTERFACE
- Power Button
- Reset Button
- USB 3.2 Gen 2×2 Type-C (20Gbps)
- 2 x USB 3.2 Gen 1 Type-A (5Gbps)
- Mic-in / Audio-out
- Insta-Light Loop Button
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Gaming series | MAG | MAG | MPG | MAG | MPG | MEG |
| Form factor housing (L x W x H) | Mini-Tower (388 x 200 x 423 mm) | Mid-Tower (390 x 205 x 457 mm) | Mid-Tower (475 x 231 x 490 mm) | Mid-Tower (471 x 231 x 497 mm) | Mid-Tower (430 x 215 x 450 mm) | Mid-Tower (583 x 257 x 537 mm) |
| Supported motherboards | Micro-ATX, Mini-ITX | ATX, Micro-ATX, Mini-ITX | E-ATX, ATX, Micro-ATX, Mini-ITX | ATX, Micro-ATX, Mini-ITX | ATX, Micro-ATX, Mini-ITX | EATX, ATX, Micro-ATX, Mini-ITX |
| Pre-installed fans | Front: 3 x 120mm ARGB fans. Rear: 1 x 120mm ARGB fan (1-to-6 ARGB hub, Mystic Light supported) | Front: 1 x 120mm fan. Rear: 1 x 120mm ARGB fan (1-to-6 ARGB hub, Mystic Light supported) | 1 x MEG SILENT GALE P12 | Rear: 1 x 120mm ARGB fan (1-to-6 ARGB hub, Mystic Light supported) | Front: 3 x 120mm ARGB fans. Rear: 1 x 120mm ARGB fan (1-to-6 ARGB hub, Mystic Light supported) | Front: 3 x 140mm ARGB fans. Rear: 1 x 140mm ARGB fan (1-to-6 ARGB hub, Mystic Light supported) |
| Max. case fans | Front: 3 x 120mm (included). Top: 2 x 120mm. Rear: 1 x 120mm (included) | Front: 3 x 120mm (1 x 120mm included) or 2 x 140mm. Top: 2 x 120mm. Rear: 1 x 120mm (included) | FRONT: 3 x 120mm/140mm. TOP: 3 x 120mm or 2 x 140mm. REAR: 1 x 120mm (included) | Front: 3 x 120/140mm. Top: 3 x 120mm or 2 x 140mm. Rear: 1 x 120mm (included) | Front: 3 x 120mm (included) or 2 x 140mm. Top: 2 x 120/140mm. Rear: 1 x 120mm (included) | Front: 3 x 120/140mm (3 x 140mm included). Top: 3 x 120/140mm. Side: 3 x 120mm. Rear: 1 x 120/140mm (140mm included) |
| Max. radiator lengths | Front: 240 mm. Top: 240 mm. Rear: 120 mm | Front: 240 mm. Rear: 120 mm | FRONT: 360mm. TOP: 360mm. REAR: 120mm | Front: 360 mm. Top: 360 mm. Rear: 120 mm | Front: 360 mm. Top: 240 mm. Rear: 120 mm | Front: 360 mm. Top: 360 mm. Side: 240 mm. Rear: 140 mm |
| Transparent side panel | Tempered glass | Tempered glass | Tempered glass | Tempered glass | Tempered glass | Tempered glass |
| Max. GPU length | 300 mm | 300 mm | 380 mm | 380 mm | 340 mm | 400 mm |
| Max. CPU cooler height | 160 mm | 160 mm | 175 mm | 175 mm | 170 mm | 185 mm |
| Max. PSU length | 300 mm (excluding 3.5″ hard drive tray) | 270 mm (excluding 3.5″ hard drive tray) | 220 mm (excluding 3.5″ hard drive tray) | 220 mm (excluding 3.5″ hard drive tray) | 250 mm (excluding 3.5″ hard drive tray) | 220 mm (excluding 3.5″ hard drive tray) |
| Dimensions: | 43 x 21.5 x 45 cm; 7.9 Kilograms |
| Model: | 306-7G10R11-W57 |
| Batteries Included: | 1 A batteries required. |
| Manufacture: | MSI COMPUTER |
| Dimensions: | 43 x 21.5 x 45 cm; 7.9 Kilograms |
I bought this along with an MSI motherboard for my first pc build in 15 years. This case has a premium feel to it withouht being too expensive. It also has loads of space for todays components (foot long graphics cards) along with room for upgrades down the line. Great wire managements solutions and easy to assemble. The GPU support arm is a great touch too.
Given a pc case needs lots of ventilation and it comes with a glass panel, then it is impossible to fully eliminate noise. However, the insulation used on most panels will help with noise reduction more effectively than a standard case.
This case is an excellent choice if you are looking for a mid tower gaming case. There are two versions, one with a glass front panel and I am glad I bought this one.. I built an MSI based PC with MSI motherboard, graphics card, cooling and power supply and everything fitted perfectly in this case. I changed the 3 front black fans to MSI RGB Fans to enhance the look. This case has enough space for all components with plenty of clearance for an RTX 4080 and amazing Airflow. Apart from the front fans not being RGB there is nothing I can fault this excellent case.
This is the First time I have Used an MSI case, I felt that I wanted to try out a New Brand of Case than what I normally Default to and this Case does not Disappoint!, Pleasantly Modular with Ample cable management space, I also really Appreciate the Built in GPU Bracket, The fans that come with the Case are Perfectly Adequate and the RGB is not too Overpowering in your room.
It has a nice airflow and cable management space. 4 silent funs included is a nice plus.
It fits well my 4070ti and 850e corsair PSU
OK for the cost reasonably well laid out, MSI MPG CORELIQUID K360 installed in the top and had to leave washers off of the radiator fixings to the top of the case as the magnetic cover/filter wouldn’t sit flush. Also removed the 3.5″ SSD rack to get power connectors fitted to PSU.
This is a nice case if you do not have a lot of cables. A 750w PSU was a very tight squeeze into the boxed off compartment that divides the space under the floor. Add a couple of drives and a 3060 GPU and your’re just about in a position where it all fits. My problem was that I bought a corsair water cooler that came with a LED panel of its own. Finding space for this and its own fan controller left no room for the case’s own fan controller so my son got an upgrade and I went for a larger case. Although there are spaces for two HDDs (in a compartment) and two SSDs (screwed to the back, which is a nice feature), I would be hard pushed to find space for the cables. It is a very solid case and is attractive to look at. Keep in mind that your PSU will be hidden, so if you are a fan of LEDs on your PSU then you won’t get to see them. Despite my gripes, this would be good for an average user and it fits well on my son’s smaller space.
The overall case is good quality, just a bit shocked that it’s tinier than what I expected but it still held a full ATX board and a 240mm AIO quite nicely. Just expect to do a lot of adjustments.
I’m really pleased with my new case MSI MPG GUNGNIR 110R WHITE. I like white colour specially if you can find all the parts. Looks amazing with preinstalled 4x120mm ARGB fans. Good airflow, transparent glass side panel Cheaper than othe
Fantastic Case! Fits 360mm radiator too! Awesome thermals, amazing RGB hub, keep up the great work MSI!
Nice rig for a mid range setup.
ATX Mobo, 850w PSU and 3080GPU all fit well! (not included).
Lights work via button on top, can further change the light with the MSI mystic software.
Case provides good clearance for a Noctua cooling tower.
Would buy again if I was looking a well built case sub 100.
Spent only about an hour and a half to complete my build, after not having done a build since the 1990s. Was glad that I decided on buying the MSI MPG GUNGNIR 110R chassis as its design really made assembly straightforward. The biggest time-waster I encountered was due to the sparse documentation of the motherboard which I opted to use. If there is anything I want to criticise about the GUNGNIR 110R, it is the choice of using 3-pin fan connectors rather than 4-pin connectors. Adding a few lines or a diagram in its accompanying manual about the best way to attach them to the motherboard would have made my build experience even smoother. Other than that, very happy with the product: it is sturdy, with fine craftsmanship, its design and cabling system well thought out, the RGB lights were working correctly out of the box, and the fans are silent.
Bought the MSI 110R & M, Its beautiful.
Cable management is easy, The ARGB controller is very helpful I was able to daisy chain 6 additional Lights that all sync with Mystic lights.
The 110M doesnt have ARGB functionality out of the box so my son had it for his board that didnt support it anyway , I was so pleased with the design that I also bought the R
Went with MSI as its a brand I know and most of the build is MSI , everything fits perfectly, Case fans are quiet would definitely recommend.
This case is really well made, plenty of good cabke routes to keep everything looking tidy and professional.
If i had one criticism, it would be maybe could have come with some front fans as it only comes with 1 rear fan. But great looking case and as mentioned build quality is up there
This case is just what i was looking for simple but have futuristic style to it its very spacious its have nice air flow front panel have everything you need even type c its very easy to disassemble and you get additional accessories like hard drive compartments i have to say for the money its the best you can ge
Solid and beautiful , love the glass side and USB C amazing with RGB fa
Everything is perfect! But lights are not working! all cabels conected but nothing happening.. mayme someone had the same problem.
I really like the look of the case with the tempered glass side panel and half of the front panel. This case comes with 4 ARGB fans which was fantastic and they look great. The case is good quality and easy to build in. The cables for the front panel and the fan cables were all neatly organised inside and ready to connect up.
There is a USB-C port on the front panel as well as 2x USB-A which gives you some nice options. The top panel has a nice wide vent covered with a magnetic mesh panel.
The spacers for different sizes of motherboard were very stiff to screw out and screw back in if you need to move them. But it’s not too bad! Really happy with this case and would recommend!
The design of the case is very nice (especially in white). Some parts of the case could be easier to install components in or move like the hdd bay.
I bought a RTX 3060 graphics card for my old case but due to it’s age and structural layout I had to buy something else, I came across this case which I was uncertain about as I’m used to full tower cases than mid tower cases. However I have absolutely no problems with this case, the cable management is spot on, the idea of having a USB-C connector is great, that is useless as of right now for me but the idea of it being there for future purpose is good enough for me to consider. To save the money I had set the computer up from scratch for the first time ever and the computer turned out successful.
Definitely worth the money.
Had to buy a new PC case because I had one that was many years old and this one specifically has a lot of room to install and wire our components and overall it looks amazing.
This case is the perfect balance of aesthetics and function, Personally I’m very picky when it comes to my cases and it always has been between one or the other (aesthetics or function) but this is the perfect mix, It looks absolutely amazing and the airflow this case allows is really something else,
The case is Extremely easy to set up and plenty spacious for your hardware needs, its quiet so it wont cause any troubles and The magnetic side panel makes life so much easier for cleaning and adjusting/changing/upgrading hardware,
Would recommend this to anyone 10/10 Still yet to find a fault with this case
Fantastic ATX, with plenty of room and fantastic cable management options for a very clean build. I was worried about the cooling effectiveness, but have had it for a month now, with no thermal issues at all. Case looks great, and the included fans (three intake & one exhaust) are very quiet and their RGB is fully controllable.
In this price range (less than 50) it’s one of the best case.
And it looks stunning. It’s well build.
It Has everything you need, and it’s not only for basic build but also will fit a small custom loop.
Had to change my very cheap case into something nicer and when I finished, my set up looks so clean and beautiful. Very straight forward to assemble everything
Case looks great, it’s well built and not flimsy like other lower budget cases. The fans look amazing and match up to other MSI products. I always come back to MSI products as reliable
Love this Case, Hight quality and plenty of space. It comes with 4 RGB fans, plenty of screws and 2x 3.5 expansion slots, the trays can also hold 2.5, no converter is needed as there are screw holes in the trays for both 3.5/2.5. Also, two 2.5 sdd trays one in the middle and one on the bac. Easy to cable managed, so those of us that are obsessed with cable management will love it. I thoroughly enjoyed building this MSI PC.
Can have 6x system fans, Built-in ARGB fans with lighting effects.
Premium-grade 4mm thick tempered glass.
The magnetic filter on top, front and bottom
great looking PC chassis, easy to build in (even easier when you buy a MSI B550 gaming plus board to go with the case).
had it just over 2 months and zero problems. if you’re looking for a great case with room to build in this is a great start.
I bought this case as I was asked to build a gaming PC for my friend’s son. This case was just brilliant for the money. It has 4 fans, 3 with controllable LED in the front panel. It has removable filters and the cabling is very nicely put together. It is sturdily built and should last for many years.
Only annoying thing is the drive bay is mounted to the bottom of the case so one of the legs/stands needs to be taken off before it can be removed (I wouldn’t have been able to fit the cables for the PSU without removing). This is generally a nice looking case my only concern is air flow into the front but it seems fine
Great looking case and well made. Has plenty of options for cable management and helps keep your build looking neat and tidy. Included ARGB fan is a nice addition, but please note the LED strip down the front is not addressable (can’t be controlled) so you are stuck with several preset options, either a static colour or a light show. The glass side really helps make case look premium and is a nice addition. I would recommend the case to other budget builders.
Honestly stunned by this cases features, style and value.
Very well thought out features including;
– Good sized feet for power supply fan intake.
– Ample storage (SSD/HDD) spaces.
– Good cable tidy points.
Style is fantastic with the RGB strong and varied with good build materials.
And what can you say about the value, it is honestly insane value for money. On a budget or not it’s a great case for any desktop computer!
So spacious and really cool case for a first build, the included fan spins but did not light up, tried straight to the mobo as well as an rgb fan hub, still no dice. Easy to assemble, not keen on the snap off style pci cover slots on the back, but everything else is really great.
I was looking for a decent case to upgrade to with room for my water cooler radiator at the top of the case. No only did this case fulfil that need but it’s also well built spacious and has really good cable management. I’m hoping to upgrade some other things at a later date and I feel that this case will give both the room and the ease of access to do that. Swapping over the parts from my previous build was really easy and there was plenty of room to put things tidy.
Very nice to build in.
Cable management was easy as I used a modular PSU but could be a tight fit if you used a PSU with captive cable s. I put 2 fans in the front and 1 in the top to give it lots of airflow as I’m running a 5600X and it’s a much cooler running case than you would expec
High quality, good temps, looks great. Quite heavy and chunky.
Not sure if it was just me, but the top 2 fan slots don’t have a proper mounting. I’ve had to use the small cable ties that came with the case, along with plenty of screws.
Very impressed for the price, I didn’t expect that ease of building or nice to have features for so cheap! Lovely smoked tempered glass panel, lights on the front panel are not overbearing and easy to switch off if needs be, adequate space for cables and plenty of tie down loops for cable ties, decent mounting options for liquid cooling, the list goes on.
Only 2 full size 3.5 hdd bays (rear, hidden) although probably enough for most people these days it’s still something to consider.
Again, for the price you can’t really go wrong, highly recommend for budget build.
Love the case other than when assembling you have to break off the metal mount brackets which is very difficult and misshaped the case at the back! But for anyone buying, break them off first before assembling anything! Wish I had known.
Fast delivery, Great looking case, heavy construction, overclocked 6700K with an overclocked gtx 1070Ti now under control heat wize, did wonder if the glass front might have an effect on cooling negativly but no problems, full load gives me 49c on the vid card and 55/60c on the cpu, approx 20% down on the stats in my little aerocool case, dont like the hard drive tray in the power supply tunnel, easily remidied, left in the box, plus the lower fan at the front mostly just cools the tunnel? bit odd! made a redirection flap up out of plastic and it now cools the underside of the vid card, much better idea, will fashion a flap in metal once happy with results, very happy with results, it reminds me of a modern building in london visually, very nice!
Absolutely love the look and build quality of the case. Found the PSU bay a bit of a squeeze with only a 750w PSU. Not sure if airflow is optimal. I didn’t really monitor them before this case. I run about mid 70c with ryzen 5 3600. Temps do drop slightly with front panel off though.
Noticed that the non glass section off the front panel is removable and metal. Might cut some of it out and ad mesh to it, depending on AIO temps one I get one.
Found out that the RGBS can only be fully customised with an MSI Mobo which was annoying. But plenty of presets available to suit all needs.
The MSI vampiric 010 is a very sleek and modern pc case that support ATX boards, as well as M-ATX and Mini-ITX motherboards, The RGB on the font panel and rear exhaust fan are bright and vibrant and the fan is compatible with mystic light sync which is MSI’s light sync software. the build quality on the pc case is out standing with no visible machining marks as well as no rough or sharp edges. this pc case is a very good budget choice with the looks and build quality of a high end case.
Great product, but not flawless. The only real issue is that the RGB terminal block is positioned exactly in the path of the main motherboard cables meaning that pushes the cable out making it difficult to fit the side panel. Fix that MSI and you have a winner!
The case is really good for the price, lots of space inside to assemble my pc, and a good space for running cables. It’s bigger than I imagined it was going to be.
A couple of niggles. It’s impossible to get to some screw holes for fans in the front panel. I ended up drilling a couple of new ones…
The included RGB fan has a 3pin connector which wasn’t compatible with the 4pin RGB headers on my MSI motherboard.
The motherboard is fitted easily, plenty of space for it. A bit squeezed for the disks and the cable management.
The LEDs in the front are amazing.
Beware that the fan is ARGB (3-pin, 5V), it needs relevant header on the motherboard. Most boards have 4-pin, 12V header.