CIARRA CBCB6736C Angled Cooker Hood 60cm with CBCF002X2
![CIARRA CBCB6736C Angled Cooker Hood 60cm with CBCF002X2 Carbon Filters Recirculating & Ducting LED Lights Black Painting&Tempered Glass Wall Mounted Range Hood 600mm Kitchen Extractor Fan [Energy Class A]](https://k4s.uk/posts/wp-content/uploads/2023/03/41aEhxKUArL.jpg)
CIARRA CBCB6736C Angled Cooker Hood 60cm with CBCF002X2 Carbon Filters Recirculating & Ducting LED Lights Black Painting&Tempered Glass Wall Mounted Range Hood 600mm Kitchen Extractor Fan [Energy Class A]
CBBIH4B 7200W Built-in Induction Hob 4 Zones with Boost Function Touch Control Ceramic Glass Plate 9 Power Levels Child Safety Lock Black
” data-position=”triggerHorizontal” />
CBCB6736C Cooker Hood COOKER HOODS
350 m³/h | Extraction Rate | 750 m³/h |
A | Energy Efficency | A |
3 | Speed Modes | 3 |
Included | Carbon Filter | Included |
350 m³/h | Extraction Rate | 650 m³/h |
A | Energy Efficency | A |
3 | Speed Modes | 3 |
Included | Carbon Filter | Included |
350 m³/h | Extraction Rate | 650 m³/h |
A | Energy Efficency | A |
3 | Speed Modes | 3 |
Included | Carbon Filter | Included |
350 m³/h | Extraction Rate | 700 m³/h |
A | Energy Efficency | A+++ |
3 | Speed Modes | 4 |
Included | Carbon Filter | Included |
- CBCW6736N Cooker Hood
- CBCB6736F Cooker Hood
- CBCB6736H Cooker Hood
- CBCS6736G Cooker Hood
| Weight: | 8.15 kg |
| Dimensions: | 40 x 60 x 75 cm; 8.15 Kilograms |
| Brand: | CIARRA |
| Model: | CBCB6736C |
| Part: | CBCB6736C |
| Colour: | Black |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | CIARRA |
| Dimensions: | 40 x 60 x 75 cm; 8.15 Kilograms |
| Origin: | China |
This is both visually pleasing and easy to use. I do however wish the hood extended so extract more steam. It does work well without the extended hood but feel it would work better if extended.
I purchased this extractor fan mostly because of it design and the fact that it was black. The motor is noisy, on the fastest setting you can’t have a conversation in the kitchen without shouting, but the absorption of the steam is very good, better than I was hoping for.
This is no louder than any extraction. In fact it’s quieter than my old one, looks very modern as was seriously easy to fit.
Ignore the template provided
Hook the bracket on the back of the extraction, have someone hold it in place and use a pencil to mark the bracket holes and it can’t be wrong.
It’s actually quieter than on this video. The video is showing this on its most powerful setting.
Would recommend this produc
I’ve just installed it and it was very straightforward. It’s not the lightest of extractor, heavier than the one I removed so I’d recommend a second person to help position it on the hanging bracket. It looks absolutely stunning fitted and a bit different to the usual chimney type.
Bought this item in Dec 2020, it recently developed a fault so I contacted customer service and within a week or so a replacement cooker Hood had just arrived via courier. You could not get better and simpler customer service than this. Highly recommended
Very happy with the hood . Very good price and super easy to install as it works with a 3 pin plug .
Suction on the hood is good and it has 3 speed levels. The front flap holds open and stays in the position you open it to ,unlike some that simply fall shut again. The two built in lights are also great and work independent of the extractor being turned on.. it also looks very smart and unlike some it is not a large oversized item above the hob
Easy to mount. Great suction. You do need a 6inch hole not a 4inch, although it will work if you step it down to 4 inch. My first unit stopped working after a week of use. Contacted the supplier, sent photos/video of issue. A replacement was sent and received within a week.
I have had to duct this through the loft area (bungalow) and yet it still seems to be taking the steam away, and odours. The metal edges are quite sharp due to thin metal, so care needed. But overall, good value and works well.
Very noisy on all 3 settings. The swing open front panel should be spring loaded so that it stays open enough to span the whole hob. As it is, it just hangs in such a way that it only really covers the back rings of the hob. The suction isn’t that great, it’s only just strong enough to hold a sheet of kitchen towel.
I purchased this hood as I read reviews first and I had a electrician fit it and once fitted he pointed out that there’s a dent on the front but now it’s fitted I can’t be bothered taking it down and then paying to have another one installed. So if you buy one please check it first.
Looks great. Easy to install – I did it myself in half an hour. The lights are great. Bit noisy on full blast (there are three suction settings) but I only use it when cooking with oil which is seldom. Would buy again.
I only have a small kitchen and wanted something not too obtrusive and this fits the bill.
As there were already tiles in place the hood had to be fitted a little higher than recommended, but it doesn’t seem to be a problem, except that because of my height I have to use a step stool to remove the filter grid for cleaning.
My son fitted this for me and it was reasonably straightforward for him as being a replacement for another hood the electrics were already in place. Some of the measurement for fitting the chimney were incorrect, but solvable.
As my kitchen ceiling has coving, some had to be removed. It was difficult to fit the top two screws, because of this and when the coving is replaced the top access will be hidden, which could be important if the chimney part needs to be removed in the future.
Overall I am really pleased with this hood, because it looks good and functions really well. No problem whatsoever with the extraction.
Extractor looks great and has stopped me from hitting my head on the old canopy type it replaced but am a little disappointed in the power of the suction to extract steam from stuff cooking on the hob
Not impressed. Installed by electrician 23 december…not used a lot and today made horrible screeching noise and fan has problems. Sounds like you are trying to start a car with flat battery, then completely dead.. Now we have to pay for an electrician to disconnect, fund a mire reluable one and pay for that to be connected. Not a happy bunny. I would actually give zero stars if possible.
Installing is pretty easy, there’s a video that is quite clear.
It could just be a bit more powerful, when you have a lot of steam it struggles to clear it before it goes up and past the extractor.
Downside is you have to buy filters to go with it, it’s noisier than my last unit and the buttons have a bit of a cheap feel to them, but at this price they are small points to gripe abou
Installed in the kitchen to replace a broken one. The design means that the taller members of the family no longer bang their heads on the hood. Seems to do it’s job well. It looks really good.
It is rather noisy and the controls are quite high up when the unit is on the wall.
Reasonably easy to install it.
Looks really good and smart.i was really pleased with the product but only gave 4 stars as I didn’t know the carbon filters were not included in the price and had to order them separately so haven’t been able to use it yet, plus I had to pay 3.99 postage for them as wasn’t able to use my free prim.