Kit Watercooling Be Quiet Pure Loop 240mm (Noir), BW006
Kit Watercooling Be Quiet Pure Loop 240mm (Noir), BW006
Easy to refill
The refill port is easy to access, which makes refilling safe and comfortable. The included coolant bottle additionally a long lifespan.
All-black design and white LED illumination
An all-black design, in combination with white LED illumination, makes for an elegant look. This is further underlined by the aluminum-style cooling block that the Pure Loop to look good in any system.
| Weight: | 1.05 kg |
| Dimensions: | 0.1 x 0.1 x 0.1 cm; 1.05 Kilograms |
| Brand: | be quiet! |
| Model: | BW006 |
| Colour: | Black |
| Batteries Included: | No |
| Manufacture: | Be Quiet! |
| Dimensions: | 0.1 x 0.1 x 0.1 cm; 1.05 Kilograms |
I got this AIO for a custom water cooling project on my laptop with the goal of making it nearly silent while gaming. I had previous experience with BeQuiet from their Silent Wings fans so when I saw they make an AIO I had to give it a shot. After getting my custom system set up and bleeding the system is very quiet. It is still audible but only just when on 5v. At 12v it is a bit noisy but that is also with 4 Pure Wings fans mounted to the radiator as I chose to go push-pull to protect the rad fins when it is in a backpack.
Wurde durch NBB geliefert und das sehr zgig. Schonmal sehr gut.
Die Aio hlt meine CPU auf einem schnen kalten Niveau. Der Einbau durch einen Laien ( das erste mal) war relativ problemlos. Der Geruschpegel ist fr mich schwer zu beurteilen, da ich aber beim Zocken eh ein Headset trage fllt hre ich faktisch nichts davon. Ich bin zufrieden und denke das man mit dem Preis von 93 Euro nichts falsch macht.
It’s a good AIO, no complaints whatsoever with the AIO itself. 1 minus point is for a really bad manual (install steps) but I won’t mark the product down for its bad documentation. I know a thing or two about PCs, I am not a “pro” but I can definitely assemble a PC fully, and the Manual shows you some generic steps, but not which cable to attach where. They do offer a video that helps with a portion of that, which is OK – but it still doesn’t show where to plug in the AIO on the MBO, do you plug it in the AIO_PUMP or the CPU_FAN header? You can’t know unless you know and work on this on daily basis. I was quite sure I had to use the CPU_FAN header (which was the case) but ended up double-checking via an install video from a random Youtube tech channel.
Be quiet si conferma un marchio di qualit anche con questo dissipatore da 240mm. Preso dal Warehouse a un prezzo veramente ottimo, perfettamente funzionante, silenzioso e performante. La colorazione bianca del waterblock veramente sobria. Possiede anche un foro per re-fillare il radiatore qualora dovessero formarsi troppe bolle d’aria negli anni. Io lo abbinerei a processori di media gamma che abbiano un tdp massimo non molto superiore ai 200W (per processori molto pi energivori andrei di 280mm/360mm)
I really wanted to love this AIO for the SFF cases I was going to use this on. Unfortunately, this cooler is too tight of a fit for the Hyte Revolt 3. It will fit if you make it fit, but the pump block, which is located on the tubes themselves, gets in the way of the motherboard and CPU block. It’s a very tight fit, and I cannot recommend this AIO for the Hyte Revolt 3. For cases like the NR200P or bigger, I could recommend this
Lieferzeit in Ordnung , Funktion einwandfrei , jedoch kam die Umverpackung ( Amazon ) stark beschdigt an .
Der Versand erfolgte von DHL
J’ai t surpris de voir que le kit LGA 1700 est inclu dans la boite.
You’re better off just getting a 240mm AIO or a high-end air cooler. They perform better.
I previously purchased a MSI CORELIQUID AIO 240MM as well and used it for atleast 2 months and ever since i started using it with my i7-11700k i would notice irregular temps. I would idle at around 65 and when gaming i would peak up to 98 and up. So yesterday i ordered this aio not knowing if it would perform better I was just testing my luck and i saw good reviews already on it. I finally have it installed and let me tell you other then the fact that the fans have no RGB this AIO is perfect and works amazing. My idle temps with Apex running max settings in the lobby and other applications open my idle temps were 45 and below and once gaming at max settings i did not pass temps of 76.
If you want a real BANG for your BUCK then grab this cooler i highly suggest it and it has all the instructions included and it is pretty straight forward to install if you have common sense!
I suggest letting the installation seat-in for a few days before making judgments about cooling performance. I also re-tightened the water block mounting screws after that: temps dropped about 2 degrees then. With everything seated it’s letting my CPU boost higher/longer than it did with the 5 yo AIO it’s replacing for better compute performance in benchmarks.
It uses the AMD backplate making installation really quite easy for an AIO although it can be a bit confusing if not familiar with the design. The pump is on the hoses which has the wire that attaches to the pump fan header, the wire on the water block is just for powering the LED light. Speaking of: it’s a bit bright for my taste so I leave it unattached. Wish there was a brightness switch.
The only real problem is the pump noise, which isn’t utterly silent even though “double detached”. Running at 5000+ RPM it makes a very, very, faint high pitched ‘hum’ that’s impossible to completely ignore if the room is completely quiet. It’s not annoying, just there. Even so, it’s much, much, MUCH better than the pump noise out of most other CLC’s or just about any of the Asetek AIO’s.
The fan blades themselves are quite all the way to 50-60% power
You can still hear the pump motor, but that’s because I was looking for any sound coming from it.
Worth the money!
+ Radiator und die Lfter zusammen bauen, war gar kein Problem (auf die Pfeile am Lfter achten). Tipp: Am Besten vorne rein und oben raus mit der Luft aus dem PC-Gehuse!
+ Lfter kaum hrbar (subjektiv). Hngt von der Lfterkurve ab (siehe Youtube).
+ Pumpe auch bei voller Drehzahl fr mich nicht hrbar (zumindest leiser als der leiseste Lfter).
– Alle Teile um die CPU haben zwar irgendwie gepasst und haben auch nicht gepasst! Ich habe ca. ein Stunde gebraucht bis keine Schraube mehr verkantet war, um sie (leicht) anzuziehen. Man musste, selbst beim Aufsetzten des Khlkrpers, erst einmal wieder alle Schrauben etwas lsen, schieben und drcken, bis die 2 Schrauben am Khler gegriffen haben (ohne zu verkanten) – und dann aber hoffen, beim vorsichtigen Anziehen alle Schrauben, dass nichts unter der Spannung kaputt geht.
Liebe be quiet! Bitte unbedingt nachbessern, oder hab ich da die Ausnahme von der Regel erwischt?
+ Der ganze Aufwand hat sich aber gelohnt! Die CPU ist nun ca. 10C khler als vorher – im Leerlauf nach dem Start ca. 26 – 29 C und unter Volllast (unter Prime95 v.30.7) nur noch ca. 75-80C.
Does a decent job of cooling my Ryzen 5950x.
First AIO I’ve had but seems to be quiet enough. The pump being located in-line versus mounted to the cold plate probably helps with some of this do to a less likely hood of resonating within the case. Not a huge fan of RGB so imple white LED on cold plate is plenty for me. Could not get AIO to run off of ASUS B660 Creator AIO pinout so just ended up powering with the included SATA connector.
fait le taff , trs silencieux , rapport qualit prix au top
Cette AIO fait dans la discrtion : il n’y a pas de LED style “boite de nuit” et c’est tant mieux.
Performing wonderfully on a 12900k so far. Monitored temperatures for some time, assuming proper case airflow this cooler can manage an average of 60-70 degrees on the CPU during normal use like games or other semi-intensive programs.
Only complaint is the pump whines a bit loudly. I have it connected to the included SATA power adapter as you want your pump running as fast as possible in AIOs as it is the pump that’ll bottleneck the performance in these things, but in doing so the whine is constant. Either use a different connection configuration or a different cooler of that whine is a deal-breaker, it does not bother me enough to complain all that much much about it though.
Stays quiet, comes with decent fans, and keeps the Ryzen 5600x cool under load. The pump is no longer the highest point in the loop which extends its life and works in strange configurations like bottom mounting. The refilling option is great to maintain the loop and reduce air bubbles.
The only drawback is the stiff tubing and the bulky pump housing which made it difficult to install in the small form factor case (difficult but possible in the NR200).
I love the be quiet Pure Loop Aio. I would recommend it to anyone who has a mid range cpu and don’t want thier PC sounding like a jet engine. It is extremely quiet and offers pretty good cooling for its price.I had some trouble installing it at first but after reading the manual again it was pretty straightforward.
I have this installed as a top exhaust in my Fractal Design Nano S case and it works perfect. Fit great, runs very quiet, and the fans never actually have to spin faster than 40% or so (and they’re dead quiet below 55%.) Keeps my Ryzen 7 2700 with mild OC at a cool 50 degrees under normal use and no more than 60 or so when running CPU-intensive applications/games. Great value compared to the other AIO brands too!
I got the 240mm version of this AIO. Very easy to install. Fans are decent and quite, just as the name of the product suggests. The only issue I have is that the connection from where the pump header would be on the CPU, loses power to the LED if I hit the wires. That’s pretty much it. It’s affordable and it does what it’s meant to do. Idle temps are around 30-36c and under load it doesn’t go past 60c and hovers around 51-55c consistently. Keep in mind I do have an open case so temps may be way different in an enclosed case. I’m happy with it! Two thumbs way up!
Sehr einfach und gut zu installieren, wie bis jetzt alles andere von Be Quiet! Von der Wasserkhlung hrt man keinen Ton. Selbst bei Volllast hrt man nichts. Das einzige was mich ein wenig stutzig gemacht hat, ist die mitgelieferte Flssigkeit. Ich habe erst fr einen kurzen Moment gedacht, dass man die Khlung selber auffllen muss. Leider steht darber auch nicht viel in der Anleitung. Die Flssigkeit ist aber wohl nur zum Nachfllen. Fazit: Bestell ich demnchst gerne wieder und empfehle ich gern weiter.
Maybe not to easy install if your case not have to much space. But it’s almost quiet. Need adjustments for fans manually. Anyway, I made small mod and make logo glow after .
The lack of RGB can be an advantage or a disadvantage depending on the system.
The appearance is lower than that of Kraken’s products, but the noise and supplemental cooling water, pump location are merit.
The most careful thing is to choose an external box option when shipping. In my case, extra coolant flowed.
Ein steuerbarer Anschlu fr die Pumpe ist unerlsslich, da die Pumpe selbst im Idle ein strendes Brummen hat.
Die Khlleistung ist hervorragend. Die AIO 360 hat 3 120er Lfter, wobei bei mir nur 2 in Betrieb sind. Auch fr einen Ryzen 9 3900XT ist das ausreichend.
I bought this cooler to put in a Cougar mini-itx case. I’d seen it done on youtube, but it wasn’t as easy as it appears. I did it, and it is running like a charm. I haven’t stressed the system yet, but temps at normal usage are 32 degrees, and the fan is turning at less than 900 rpm. The fan is temp controlled, but the pump constantly runs at 12v. I can’t hear a thing. Placing the pump on the fluid tubing itself, just below the radiator is brilliant.
Die Wasserkhlung hat sich sehr einfach installieren lassen, ich habe die 240 mm in meinem Silent Base 800 Gehuse vom selben Hersteller installiert. Die 240 mm Version ist die grte bei der sich der Radiator noch direkt unter dem Deckel installieren lsst. Ich hatte leider erst eine 360 mm bestellt, die ist aber zu gro.
Durch die Pumpe wird der Zugang zu den Anschlssen der CD / DVD Laufwerke etwas enger, ist aber in dem Gehuse noch gut machbar.
Die Khlung sieht auch gut aus, das war fr mich aber nebenschlich (Gehuse sowieso immer zu). Das Kabel fr die LED Beleuchtung muss nicht angeschlossen werden.
Der verbaute Lfter ist hierbei kaum aus dem Gehuse zu hren, weil die Lfterkurve so flach gehalten werden kann, dass er unter 1000u/min bleiben darf.
Einen Punkt Abzug muss ich geben, weil die Pumpe fr mein Empfinden zu laut ist, mein Mini-ITX Case steht auf dem Schreibtisch und ich kann die ganze Zeit ber ein Surren der Pumpe wahrnehmen.
Ich habe diese AiO bereits als Ersatz fr ein Modell eines anderen Herstellers, wo die Pumpe nochmals deutlich lauter war.
Auch wenn ich nicht 100% zufrieden bin, bleibt diese Khlung jetzt drin.