MORADO Thermostatic Shower Mixer Bar with Top Outlet 3/4″ G
MORADO Thermostatic Shower Mixer Bar with Top Outlet 3/4″ G and Bottom Outlet 1/2″G,Bar Mixer Shower,Round Shape,Brass, Chorme Finished, Wall-Mounted
Elegant design, easy to install and operate, it is the best choice for your bathroom.
| Weight: | 1.67 kg |
| Dimensions: | 1.4 x 0.8 x 3.5 cm; 1.67 Kilograms |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | MORADO |
| Dimensions: | 1.4 x 0.8 x 3.5 cm; 1.67 Kilograms |
Was a replacement fitted perfectly working well would buy agai
Struggled to find a similar mixer bar as a replacement for our old broken one in the plumbing suppliers, they kept telling me to buy a whole unit with riser rod, shower heads etc for a few hundred pounds then I found this. Exact same measurements as my old one, easy to fit and a great price. Decent quality and we are happy with our purchase.
This is the second one I’ve purchased- I broke the first one- happily re bought the second one. It’s a great unit.
My old shower bar was blocked with limescale. I couldn’t get the cartridges out to clean them.
Decided to get this new one and replace.
It’s a simple job, all parts are included and is a much better bar than the old one.
Great piece of kit. As a non handyman, it was easy to install – and I got it right first time. Do remember to switch off water and any pumps also when you attempt to replace. Very pleased with the item
Got this mixer to replace old one that was stiff and temperature valve wasn’t working. It was easy to replace for old one, and so far works perfect! Would highly recommend.
Simple swap with old broke one. Shower the bottom outlets is engaged by twisting the left side forward. All bits in the box very happy
Bought this product to replace my old mixer tap which was locked on hot water with the temperature control failing. It arrived and was fitted the next day. This part is quality, its a direct replacement for the old one, I’m delighted and recommend it.
Easy to install and great to have a fully working replacement for our old unit!
I had to buy this as the thermostat had gone on my old shower, looks stylish, works perfectly and was easy for my hubby to set up, over all a fantastic buy!
REplaced a leaking similar valve. Only took minutes to install.
Bought this to replace a 4 year old mixer which was IDENTICAL.
The temperature regulator valves in this kind of unit are prone to seizing up and failing and that means poor temperature control – too hot or too cold!. This was the situation with the old one and frankly it was cheaper to buy this entire unit and switch it out than to buy just a new valve! NO BRAINER!
Bought this as a replacement for my existing shower mixer which was damaged.
Despite being an amateur DIY-er, I managed to get the product replaced fairly easily.
Except for the mixer’s rotation for the overhead shower & handheld shower being reversed, the product is pretty good. The temperature (hot-cold) mixer knob is quite smooth.
This has such a nice simple classy look to it . It was easy for my husband to fix and we have had no problems with it at all. Works smoothly,cleans well ,changes tend with ease. Bargai
Had this installed to replace an old thermostat by a professional plumber – his verdict was that it is not just a lovely looking mixer tap, but one that would match most standard shower kits and is of a top-notch quality! We have not had any issues with it over the past month – no pressure lost, the temperature is always just right, so think I can state that it is a very good item! Definitely recommended!
I would recomend getting a professional in to fix this, my husband looked at this as a keen diy amateur lol and admitted defeat, clear instructions on how to fit it but the complexities were to much for my husband.
This really is ergonomic in every way, very stylish and a minimilastic way and looks amazing in a wet room.
The unit itself does not get hot so your able to touch it without burning your hands, the water temp is controlled again no risk of scalding.
Do note , it is clearly shown in the photo’s this is for the shower bar only this does not include the shower head or shower cable.
Due to the block design of this it’s so easy to keep clean and you will want it to keep it’s nice shiny plated chrome effect.
Excellent value for money if like me you prefer the minimalist effect, really does look perfect in a wet room just add’s a bit of design to a somewhat sparce room.
I ordered this to put in our newly renovated bathroom. I wasn’t confident in fitting it myself so I paid a plumber to install it. They mentioned that it was easy to install as it came with all the necessary bits. It comes in a chrome polished finish which fits perfectly with the rest of our fixtures. Extremely easy to operate and means I don’t have to find the perfect temperature every time I want to use it now. It also has a safety button so kids can’t scorch themselves.
Overall very happy with it and cheaper than anywhere I could find it in the big DIY stores.
This is an excellent quality shower mixer bar. It is finished in chrome and once installed works really well.
The thermostatic shower mixer bar is made of premium solid brass and multi-layer chrome plated which is corrosion-resistant and moisture-proof, durable and easy to clean.
Package contain:
1x thermostatic valve tap;
1 x fitting kit;
1x instruction.
Material: Solid Brass ; Finish: Polished Chrome ; Wall
Mounted;
Separate controls for temperature and flow; Safety
button temperature: 38C;
Outlet water temperature range: 20-50 C; Cold
water supply temperature: 8-29 C; Hot water
supply temperature: 55-85 C;
Recommended Water Pressure: 0.1 – 0.5 Mpa;
Separate controls for temperature and flow
Top outlet: G 3/4″ BSP (25mm) Bottom outlet: G
1/2″ BSP (21mm), Hot & Cold water inlets: G 1/2″
Distance between the pillars: 150mm
The water temperature is stable so no risk of scalding. You need to rotate the left handle to control water flow and rotating the right handle will control water temperature. Cool touch technology means no scalding by touching the outside of the shower mixer bar.
You just need to add your own shower head and that’s it. Once installed this is a really good quality item that is likely to last many years. The current selling price of 52.00 is very reasonable for a good quality product like this.
This is a smart-looking, robust-feeling thermostatic bar. The bar is designed for use with a twin shower and on one side has a controller for regular and rainfall shower attachments, and on the other temperature adjustment. The bar comes well-packed — in a foam surround, with a fabric bag to protect it and was free from any signs of marks or scratches. I was a bit surprised to find a safety lock button (the kind used to prevent accidental temperature increase) on the shower selector side, where it has no function. I guess this gives the bar a more balanced look, but I’m not a fan of redundant buttons.
The metal does show fingerprints up really easily: as soon as I started handling this my dabs were visible everywhere. Included with this was an Allen key for fixing and a roll of plumber’s tape.
This Thermostatic Shower Mixer Tap works perfectly, looks very elegant and stylish, and it was super easy to install. The instructions are clear and easy to follow, and I used Teflon tape to get a perfect seal. The finish looks great, and I am really pleased with the quality. The shower tap mix feels durable and sturdy, turns smoothly, and the water pressure and flow are great when the faucets are turned on or off. Great value for the price, and I do recommend
This Shower mixer has a great build quality and you can feel that with its weight. The fittings are included in the package. It was very easy to install this mixer on the tap and I needed no professional to install these.
The mixer quickly get ready and maintains a consistent temperature without any fluctuations which is crucial and most important function of a mixer.
The knobs are smooth. The hote water know has safety button to go over 38 degrees which works very well in case when you are in deep thought while taking shower.
The mixer has a standard size inlets and outlets which I think will fit most of the bathroom pipes. The mixer comes with five years of limited warranty. I definitely feel that this is a excellent quality shower mixer placed at fantastic price of 52 at the time of review.
A beautifully finished shower mixer, this comes in a fantastic bit of packaging. It’s protected well, comes with gloves to pick this up with so you don’t get fingerprints all over it, and the supplied fitting kit was really easy to work with. I haven’t installed this personally but my friend who is fitting this into our other home said it’s very nice quality and should last a considerable time.
The chrome finish on this is faultless.
A very wide shower mixer tap with an unusual square profile: I’m assuming there must be matching taps available. Either way, this is a bit of a visual statement, and looks quite expensive. Their is a 38C heat limiting button on the right tap, the one on the left is just for symmetry and doesn’t do anything. It comes with allen key valve caps, tape, etc – all the stuff, more ore less you will need to install it. Very heavy and wwell finished in bright chrome. If you have the taps and other hardware in this style already, obviously a great choice.
Very useful shower mixer. You can set the hot water level with the cold water level so that you don’t have to adjust the water every time when you take a shower. It is very easy to install and works properly. Solid mixer, heavy and feels sturdy in the hand with a silver finish shiny finish. The execution of the manufacture and the materials from which it is made are of high quality. With a beautiful design that gives a note of elegance in any bathroom.
This thermostatic shower mixer tap includes nothing but the base. And judging by the base unit, everything seems well made and made to a high quality. All the taps turn smoothly and the chrome finish is bright and shiny.
No sign of rust or dulling of the chrome yet. Ultimately, this shower mixer bar is great in terms of value as well as quality.
This MORADO thermostatic shower mixer tap arrived boxed with user guide and mounting kit.
It looks and feels of a premium quality, sturdy and durable.
It is finished in a very shiny chrome.
It is wall-mounted shower mixer with 3/4″ G top outlet and 1/2″ G bottom outlet – tap and shower hose aren’t included.
I like its modern, stylish and elegant square shape design.
It works perfectly and smoothly, easy to open/close.
It seems pricey as for that price are some sets available with tap and shower head, but obviously I don’t know the quality of the others.
This one is of an excellent quality and looks pretty and expensive, so I would happily recommend it.
Clearly, you need a good plumber to install this for you but aside from that, it does what it says on the box. Well made and solid metal and chrome finish
I am very happy with this shower mixer. It’s a perfect addition to my bathroom.
Installation of the kit was done within minutes with the detailed user manual.
Made from high-quality solid brass, it’s rust-proof and anti-corrosive, with a smooth, shiny finish and a modern, sleek look.
No more clogging with the4-layer anti-clogging technology. Comes with separate controls for water temperature and flow, a smooth handle, cool touch, and water-saving technology.
Perfect hot/cold temperature balance with the 38-degree safety button.
This is a really well made and neat mixer bar for showers. It was delivered quickly and in good quality packaging and it is really high quality. It looks really nice and has a very modern style, is super clean and looks very shiny.
It was easy to fit and switch with my old one, it was an easy process and it didn’t take long. The controls and settings are really easy to use and they end up doing what you want. There is a safety button which is good and sets it to a mild temperature.
It is easy to switch between different temperatures and I really enjoyed using this bar. Overall, it does the job well and I highly recommend it for the price.
This thermostatic shower mixer tap arrives in a plain white cardboard box and inside you’ll find the tap, 2 inlet pipe covers, Allen wrench, 4x water filters, 2x reducer fittings, sealant tape, and an information leaflet.
The tap itself is made from brass and has a polished chrome finish which is highly reflective and has a nice mirror finish. It is thermostatically controlled so you can adjust it to the desired temperature, and it will hold the temperature without you having to keep adjusting it. The right adjuster controls the temperature and the left one controls the water pressure. The temperature adjust locks out at 38 degrees C and if you want it hotter, you have to press in the safety button to allow the adjuster to go further round and reach higher temperatures. The left adjuster has the same safety button but it’s just for show to make it symmetrical as the adjuster can go all the way around in both directions to control the water flow speed.
This shower mixer is best installed to a wall that has the pipework already in it, as it’s designed to be installed this way. The top outlet is for a fixed, or high up, shower and the lower outlet is for a shower attached lower down to the bath.
The instructions aren’t worth looking at as they seem to be measurements for different types of tap, but installation is straightforward. The measurements between the hot and cold inlets are 15cm to the centre of each inlet.
A great looking thermostatically controlled shower tap which looks beautiful with its chrome finish
A well made simple standard mixer bar which is quite well priced for its quality. There is a safety button incorporated so that it wont get too hot unless you press it and bypass it, so good for the elderly and children.
Fitted in 15 minutes. Old temperature valve was partially seized so this was the most economical fix with an excellent guarantee. Worked instantly…no more fighting to get the shower working.
It is very shiny and heavy.
Sold and robust, packing also good and the mixer is in a cloth pouch.
Left handle for power/strength and right for temperature, both have safety button but the left one is not activated ( ie: no use, just for the symmetrical look ) where is the right is the 38c safety button.
It is looking good in the shower room.
The leaflet/booklet inside the box is pretty much useless – not related to the mixer, perhaps they should give a product range leaflet, as some customers might want matching accessories.
Looks good after installed, shower mixer bar is made of premium solid brass and multi-layer chrome plated which is corrosion-resistant and moisture-proof, durable and easy to clean.
Very happy with the purchase, high quality item.
This is impressive, at the price. It’s heavy and seems perfectly chromed. The valves and temperature stop have actions that feel just right.
We very much like the style – contemporary and just right for one of the bathrooms we plan in a self-build. It’s still at first-fix stage, though.
So, we can’t yet test it, sadly, but installation looks as though it’ll be straightforward. We’re delighted that we’ll be able to attach two shower heads — one overhead and one on a hose.
At the current 57, the mixer seems a very good buy.
Ordered this after our existing tap broke (temperature tap stopped working rendering it useless as you could not change the shower temperature and it was stuck on hot)
This arrived and i was really happy with the quality, came really well packaged and the tap itself was in a soft touch pouch to stop and damage or scratches (nice touch).
Really easy to fit being standard size inlets 150mm apart i removed the old and fitted my lovely new one. Works as it should and a perfect replacement for my old broken tap.
Lovely looking smooth actioning taps alternating from shower to hand held shower head and temperature adjustment on otherside.
Over the moon! Been used daily for over a week now and only have good things to say.. GREAT
Really pleased with this shower mixer bar, it feels well made, robust and looks extremely sleek. All the fittings were included in the box and it’s quite simple to fit. It’s great to have an overhead piped water outlet as well as a shower hose lower outlet. Overall really good value for money compared to the larger diy stores.
Heavy new age bath fashion design wall mixer .Decent mid range quality mixer with no single defect .Both mechanical valves are clicking so assuming they are working fine no problem .Fine finish .Safe packaging with some plumbing fitting accessories.
This is a neat little well-made mixer bar with both 3/4 and 1/2 fittings, it feels high quality for the price and works well, the safety button is really great for people with children as you have to press it in to go past 38 degrees, all in all, a really good mixer bar.