Egg Incubators for Hatching Eggs Automatic Turning Incubator
Egg Incubators for Hatching Eggs Automatic Turning Incubator Brooding Chicken Incubator Home Incubator Farm Egg Incubator 12 Eggs
OUYOLAD Egg Incubator, Incubator for hatching eggs with automatic egg turner
1. Install roller egg tray and automatic water replenishment.
2. Turn on the power.
3. Cover the transparent cover and put it on the foam box to test the machine.
4. After the temperature reaches the set temperature, put in the eggs.
5. In the last three days of hatching, stop turning the egg plate, pick up the eggs and take out the roller egg tray. Center the net on the bottom of the machine. Spray the back of the tray with water to soften the shells and wait for the chicks to hatch.
1. Built-in fan and temperature probe.
2. The water tray is partitioned for easy humidity control.
3. Built-in motor, durable.
 |  |  |  |  | |
|---|---|---|---|---|---|
| Temperature | ✓ | ✓ | ✓ | ✓ | ✓ |
| Humidity | × | × | ✓ | ✓ | ✓ |
| Daul power supply | ✓ | ✓ | ✓ | ✓ | ✓ |
| Weight: | 2 kg |
| Dimensions: | 38.6 x 36.6 x 18.9 cm; 2 Kilograms |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Dimensions: | 38.6 x 36.6 x 18.9 cm; 2 Kilograms |
| Quantity: | 1 |
Great product for a beginner as I was light was very useful as was the automatic rollers and temp control, however the bottles you put on yourself leave all the water in the incubator I didn’t use them due to this and just added water as needed into the tube which worked.
The bad: BEWARE OF MOISTURE! It stopped heating during lockdown on day 20, and had some mad fiddling to transfer the eggs out to the other box whilst maintaining their humidity. Pulled up the substandard plastic control panel cover to find a couple of the contacts were shorting (perhaps due to moisture somehow getting in through the inconvenient holes in the label, but could possibly have come up through the fan vent- won’t know until later)
Cleaned the corrosion off the board with alcohol and got it working again without having to solder anything though. We will see if the ^40/v20 crisis forked the hatch.
The Good: Nice and roomy, the water input bottles are a bit fiddly, but the idea is sound. Turner works fine, fan works well, it’s comforting having spares of both though as I bought it because my old one stopped turning.. fixed that now so thankfully I had a backup! The lid isn’t attached, so have a care with condensation – make sure it doesn’t drip down on the control panel. Also, a towel can be put over the foam cover (leaving the two vent holes uncovered on the right side), which stops it from fogging up during lockdown.