ErGear Dual Monitor Stand for 13 to 32 Inch Screens, Dual
ErGear Dual Monitor Stand for 13 to 32 Inch Screens, Dual Monitor Arm Ergonomic Viewing Angle, Dual Monitor Mount – Adjustable Tilt ±45°/ Swivel 180°/ Rotate 360°/ VESA 75/100mm
The dual monitor arm’s multiple points of articulation enable smooth and precise monitor positioning.
Product Details Comparison
 EGCM3 |  EGCM2 |  EGDS8 |  EGSS8 |  EGCM12 | |
| For Monitor Size | 13-32 inch | 13-32 inch | 13-32 inch | 13-32 inch | 13-32 inch |
| Monitor Weight | 0-8KG | 0-8KG | 2-8KG | 2-8KG | 0-8KG |
| VESA Type | 75*75mm/100*100mm | 75*75mm/100*100mm | 75*75mm/100*100mm | 75*75mm/100*100mm | 75*75mm/100*100mm |
| Tilt | +45°/ -45° | +45°/ -45° | +45°/ -45° | +45°/ -45° | +45°/ -45° |
| Swivel | +90°/ -90° | +45° / -45° | +90° / -90° | +90° / -90° | +45°/ -45° |
| Rotation | 360° | 360° | 360° | 360° | 360° |
| Max. Height | 42cm | 42cm | 46cm | 41cm | 42.5cm |
| Installation method | Stand Base | Stand Base | C Clamp/Grommet mounting | C Clamp/Grommet mounting | C Clamp/Grommet mounting |
| Hardware Included | ✓ | ✓ | ✓ | ✓ | ✓ |
| Cable Management | ✓ | ✓ | ✓ | ✓ | ✓ |
| Weight: | 3.24 kg |
| Dimensions: | 43.18 x 16.51 x 9.4 cm; 3.24 Kilograms |
| Brand: | ErGear |
| Model: | EGCM1 |
| Colour: | Black |
| Batteries Included: | No |
| Manufacture: | Ergear |
| Dimensions: | 43.18 x 16.51 x 9.4 cm; 3.24 Kilograms |
The bracket that secures the frame to the desk is very strong and provides stability.
The cable tidys that come with the stand are a great touch.
Would definitely recommend.
Easy to set up and mount to the desk. Have seen these types of Mount before but always had reservations over the sturdiness and strength of them. In no doubt that it has a lot of holding strength and trust it to hold my two 27″ monitors up. Only slight issue which I haven’t worked out yet has a that the right monitor seems to be slightly lower than the left one. Has really handy cable management running down the arm and stand.
Very easy to assemble, didn’t take very long. Holds 2x 24 inch monitors with ease. The cable management is very good. Great space saver for working from home set up. Worth the money.
Everything looks and feels better than a normal monitor stand which took up most of the desk!
I have a 27″ and a 23″ monitor mounted on this and it’s perfect. What I love the most about it is the cable management – they’re are little clips on the on each arm and on the base arm to allow you to run the cables along the mount which is great so no messy cables hanging dow
Some of the cheaper versions do not have as many points to adjust. Have read that people have monitors not the same height as they cannot adjust! NOT THIS ONE. Many points of articulation and very sturdy. Would highly recommend.
Perfectly accompanies my two montiors, both of simular size. I would say that if you have a desk made of cheap wood then you would need something underneath the brackets to spread the pressure as I found out with my IKEA desk, but still a great buy and goes up tall enough to fully reach my eye line.
Overall, I’m very happy with the ErGear Dual Monitor Stand. It’s great for anyone looking for a high-quality, affordable, and versatile way to mount two monitors. The arms wasn’t as long as i thought but still good enough for my two 27 inch monitors. Also i recommend you have some help as i did it alone and it was a bit difficult trying to install the monitor and tighten the screws.
Far better than I’d expected for the low price tag. I paid 26.39 on a one day offer but would have been happy even if I’d paid up to 40 for this. I’m only on my first day with it, but it seems to be very strong and holds a 24″ and a heavy old 22″ monitor perfectly with plenty of adjustment to get them side by side or to have one of the monitors on a slight angle as we settled on after playing with the position for while.
The cable tidy clips are a nice inclusion and the fact that the alan keys can be stored in the central cable clip is a really nice touch, the tilt angle may need to be tightened up down the road if we adjust it too often but this isn’t an issue as we will always have the correct tool at hand.
Having the desk space previously taken up by bulky monitor stands is fantastic, I would gladly buy another, in fact I have another PC with a 3x 24″ monitor setup and I’m already considering replacing my existing triple monitor desk stand with the 3 monitor version of this one to recover lost desk space.
Bought this to fit on my rise and fall desk and to give me some more display real estate. Took about 15 mins to set up including attaching the monitors. Very handy Allen key holder on the arm, makes adjusting the display stands easy. Very sturdy and its stood up to a lot of use since purchase. There are more expensive ones available but for 2 24in monitors this works perfectly.
Overall, I’m pleased with this, easy to install and looks good as well asmfeeling sturdy.
I just wish it was a little bit more maneuverable.
My unit is quiet c,one to the wall and I’m not able to get the screens exactly where I want them without them pertruding over the desk more (which I don’t want).
If you have space between your desk and the wall then I would recommend.
I really like the product it’s sturdy and easy to assemble especially as it has a very good instruction book.
All the screws that come with the keys are organised.
The only complaint I have is that one of the plastic bits for the cable management came broken, should be 4 but I have 3 working shouldn’t be a problem though as long as it’s all good.
My last recommendation is if you have a desk that has a frame don’t buy it as it won’t fit
Overall the product is great would buy again if I had to
Instructions are good and as the unit fits onto the desk using a clamp it is virtually flat at the back, for a home office the desk won’t go flush with the wall anyway because of the skirting. Overall the assembled stands probably overhand the back of the desk by about 10mm. The quality is spot on and everything was well packed and easy to find within the packaging.
I was concerned about sturdiness, but after a few tweaks to the clamping position – as my desk has a cornice type bar on the underside at the rear I added an additional block inside this so the clamp had more to secure to – and a tightening of the adjustable joints and we were they. Nice and steady!
A bonus was that for once there was more than enough cable tidy clips making everything neat and tidy!
Every desk should have one of these and at this price they are a real bargain!
The product is good and easy to put together and has really tidied up my desk – HOWEVER – the 32″ monitor is measured diagonally and not across the top. I found this out as both my monitors are 32″. I am keeping it though and have turned one of my monitors 90 degrees as I do a lot of drawings.
This product was easy to assemble and fit the dimensions of my workspace really nicely, while freeing up almost the entire desk space. The footprint of the clamp is modest and most of the structure is masked by the monitors, making for a modern and sleek appearance.
The clamp itself slightly overshot the framework of the desk on the underside, so to compensate, I added some cork and card shims to fill the void and there have been no issues with flimsiness. The while structure, with 2 monitors at around 3-4kg each feels nice and robust.
The only concern I have is that the monitor tilt mechanism could be a bit more rigid. If you install monitors on the heavier side, they may droop slightly over time.
Overall, really happy with the product and price point.
The assembling instructions are clear, and the nuts and bolts are all well labelled so you wouldn’t get confused. It took me less than 10 mins to out this together.
Only one snag that I think isn’t made particularly clear – you’d need to use a hex key (or Allen key) to adjust the height which may be a bit of a hassle if you change the height of your monitors frequently. But if your monitors are set at the same height then this wont matter.
All in all, really good product for the price.
The only thing that bugs me about it is that the two parts of the clamping bracket at the back of the desk are joined with socket cap screws with quite a protruding head. Hex centred countersunk screws would have allowed it so sit 8mm closer to the wall. It’s a little thing but it’s just a bit annoying how far the desk sits out from the wall and half of the gap is those 2 screws heads.
I tried ordering all sorts of extension adapter type products to correct this problem but all of them were unsuccessful in my situation. In the end i had to return this product and buy a stand that allowed for vertical adjustment too. All my headaches have now gone!
Is recommend this product ONLY if you have standard vesa mount placement on the back of your monitors. If not then get a product with vertical adjustment arms on.
Edit: After a couple of months of use, I tried to adjust the height and in doing so, the screw got scrapped and then I was not able to tighten the arms and they kept falling, I contact the seller and provided the images and all, and they very helpful and send out a replacement for me right away. To be honest the stand was good until I tried to change the height and in doing so the screw was scrapped. But other than that I am really pleased with the product.
I have two monitors and the main monitor I used is an Alienware 27-inch gaming monitor it’s heavy and the stand it comes with takes up a lot of space on the desks the other monitors is similar so to fix this issue I wanted to upgrade to mounted monitors floating. This seems a good idea that I can have the space free underneath.
This does a good job doing that but one of the monitors is heavy it’s about 8KG and the monitor keeps losing down even after tightening the screws. It is okay for the 2nd monitor however due to its being heavy it just tilts down. Other than that it does work.
Assembling takes a while and this was my first time using this sort of thing so it took a while for me to get everything sorted.