Everbuild LJCR01 Wood Preserver, Clear, 1 Litre
Everbuild LJCR01 Wood Preserver, Clear, 1 Litre
Everbuild – A Sika Company
The UK and Ireland’s largest manufacturer of sealants, adhesives, DIY products, powders and building chemicals. Everbuild are proud to be home to the trade’s most respected products which have been enhanced over the years by class-leading research and facilities. With unique technology including i-Cure and Active Resin Technology, Everbuild’s product development activity is relentlessly setting industry standards at the highest quality and leading the field in solving the problems of the future, today.
| Weight: | 1.01 kg |
| Size: | 1LTR |
| Dimensions: | 6 x 12 x 20 cm; 1.01 Kilograms |
| Model: | LJCR01 |
| Part: | LJCR01 |
| Colour: | Clear |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Sika Everbuild |
| Dimensions: | 6 x 12 x 20 cm; 1.01 Kilograms |
| Quantity: | 1 |
| Size: | 1LTR |
Used this to paint on a cut tanalised piece of wood I’ll see what happens but good service and efficie
This is a good wood preserver. Used this for end cuts of timber and preserving timber as well
I bought this to coat an old bit of garden furniture that needed protection from the elements due being used outside. The preserve was easy to apply via brush, although it is quite runny which is something to be mindful of. It went on well and smoothly, and has left the wood looking a beautiful colour again. It also dried very quickly during the hot weather and I’m very pleased with the results, time will tell whether or not the protection lasts, but for now I’m very happy – would recommend
goes on nice and easy,but only time will tell if it is any good
A little bit of damp in my loft caused by condensation from a party wall. Stopped the problem and increased loft ventilation and waited a year for the loft to dry out. Just to be on the safe side, coated all the timber with the preserver. One tin did the entire roof. Coverage depends on absorption of the timber. Thin as water, so very economical and easy to apply. I just used a paintbrush, rubber gloves and a mask with eye coverage. Judging by the ingredients, it’s as good as any other.
Recommended.
Used this product on non-treated timber to form some planters before priming and top coating. It’s very thin so goes on well but be careful when applying as it tends to flick/drip off the brush. Read the warnings on the tin before you start. Soaks in well. Time will tell if it works or not.
Bought this for my front small panel fence , it was brand new wood panels so it lapped up the preserver , I had to buy another one it doesn’t go far on new wood , so far so good but time will tell
Good drying time, very easy to apply. Looks to be rain resistant. Bit expensive.
Used this on a bottom of a chair that had sat to long in the garage and damp/rot had set in. All I can say is it worked a treat.